diff options
Diffstat (limited to 'dts/src/arm/armada-xp-crs305-1g-4s.dtsi')
-rw-r--r-- | dts/src/arm/armada-xp-crs305-1g-4s.dtsi | 104 |
1 files changed, 0 insertions, 104 deletions
diff --git a/dts/src/arm/armada-xp-crs305-1g-4s.dtsi b/dts/src/arm/armada-xp-crs305-1g-4s.dtsi deleted file mode 100644 index 32fb21b2bf..0000000000 --- a/dts/src/arm/armada-xp-crs305-1g-4s.dtsi +++ /dev/null @@ -1,104 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device Tree file for CRS305-1G-4S board - * - * Copyright (C) 2016 Allied Telesis Labs - * Copyright (C) 2020 Sartura Ltd. - * - * Based on armada-xp-db.dts - * - * Note: this Device Tree assumes that the bootloader has remapped the - * internal registers to 0xf1000000 (instead of the default - * 0xd0000000). The 0xf1000000 is the default used by the recent, - * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier - * boards were delivered with an older version of the bootloader that - * left internal registers mapped at 0xd0000000. If you are in this - * situation, you should either update your bootloader (preferred - * solution) or the below Device Tree should be adjusted. - */ - -/dts-v1/; -#include "armada-xp-98dx3236.dtsi" - -/ { - model = "CRS305-1G-4S+"; - compatible = "mikrotik,crs305-1g-4s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp"; - - chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { - device_type = "memory"; - reg = <0 0x00000000 0 0x20000000>; /* 512 MB */ - }; -}; - -&L2 { - arm,parity-enable; - marvell,ecc-enable; -}; - -&devbus_bootcs { - status = "okay"; - - /* Device Bus parameters are required */ - - /* Read parameters */ - devbus,bus-width = <16>; - devbus,turn-off-ps = <60000>; - devbus,badr-skew-ps = <0>; - devbus,acc-first-ps = <124000>; - devbus,acc-next-ps = <248000>; - devbus,rd-setup-ps = <0>; - devbus,rd-hold-ps = <0>; - - /* Write parameters */ - devbus,sync-enable = <0>; - devbus,wr-high-ps = <60000>; - devbus,wr-low-ps = <60000>; - devbus,ale-wr-ps = <60000>; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&i2c0 { - clock-frequency = <100000>; - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; - m25p,fast-read; - - partition@u-boot { - reg = <0x00000000 0x001f0000>; - label = "u-boot"; - }; - partition@u-boot-env { - reg = <0x001f0000 0x00010000>; - label = "u-boot-env"; - }; - partition@ubi1 { - reg = <0x00200000 0x00e00000>; - label = "ubi1"; - }; - }; -}; |