diff options
Diffstat (limited to 'dts/src/arm/armada-xp-lenovo-ix4-300d.dts')
| -rw-r--r-- | dts/src/arm/armada-xp-lenovo-ix4-300d.dts | 293 |
1 files changed, 0 insertions, 293 deletions
diff --git a/dts/src/arm/armada-xp-lenovo-ix4-300d.dts b/dts/src/arm/armada-xp-lenovo-ix4-300d.dts deleted file mode 100644 index 87dcb502f7..0000000000 --- a/dts/src/arm/armada-xp-lenovo-ix4-300d.dts +++ /dev/null @@ -1,293 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device Tree file for Lenovo Iomega ix4-300d - * - * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com> - */ - -/dts-v1/; - -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> -#include "armada-xp-mv78230.dtsi" - -/ { - model = "Lenovo Iomega ix4-300d"; - compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230", - "marvell,armadaxp", "marvell,armada-370-xp"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0 0x00000000 0 0x20000000>; /* 512MB */ - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; - - internal-regs { - serial@12000 { - status = "okay"; - }; - - ethernet@70000 { - pinctrl-0 = <&ge0_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - - ethernet@74000 { - pinctrl-0 = <&ge1_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; - - usb@50000 { - status = "okay"; - }; - - usb@51000 { - status = "okay"; - }; - - i2c@11000 { - clock-frequency = <400000>; - status = "okay"; - - adt7473@2e { - compatible = "adi,adt7473"; - reg = <0x2e>; - }; - - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; - - pcf8563@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - - }; - - nand-controller@d0000 { - status = "okay"; - - nand@0 { - reg = <0>; - label = "pxa3xx_nand-0"; - nand-rb = <0>; - nand-on-flash-bbt; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x00000000 0x000e0000>; - read-only; - }; - - partition@e0000 { - label = "u-boot-env"; - reg = <0x000e0000 0x00020000>; - read-only; - }; - - partition@100000 { - label = "u-boot-env2"; - reg = <0x00100000 0x00020000>; - read-only; - }; - - partition@120000 { - label = "zImage"; - reg = <0x00120000 0x00400000>; - }; - - partition@520000 { - label = "initrd"; - reg = <0x00520000 0x00400000>; - }; - - partition@e00000 { - label = "boot"; - reg = <0x00e00000 0x3f200000>; - }; - }; - }; - }; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-0 = <&power_button_pin &reset_button_pin - &select_button_pin &scroll_button_pin>; - pinctrl-names = "default"; - - power-button { - label = "Power Button"; - linux,code = <KEY_POWER>; - gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; - }; - - reset-button { - label = "Reset Button"; - linux,code = <KEY_RESTART>; - gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; - }; - - select-button { - label = "Select Button"; - linux,code = <BTN_SELECT>; - gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; - }; - - scroll-button { - label = "Scroll Button"; - linux,code = <KEY_SCROLLDOWN>; - gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; - }; - }; - - spi3 { - compatible = "spi-gpio"; - status = "okay"; - gpio-sck = <&gpio0 25 GPIO_ACTIVE_LOW>; - gpio-mosi = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/ - cs-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; - num-chipselects = <1>; - #address-cells = <1>; - #size-cells = <0>; - - gpio_spi: gpio_spi@0 { - compatible = "fairchild,74hc595"; - gpio-controller; - #gpio-cells = <2>; - reg = <0>; - registers-number = <1>; - spi-max-frequency = <100000>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&hdd_led_pin>; - pinctrl-names = "default"; - - hdd-led { - label = "ix4-300d:hdd:blue"; - gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - power-led { - label = "ix4-300d:power:white"; - gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>; - /* init blinking while booting */ - linux,default-trigger = "timer"; - default-state = "on"; - }; - - sysfail-led { - label = "ix4-300d:sysfail:red"; - gpios = <&gpio_spi 2 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - sys-led { - label = "ix4-300d:sys:blue"; - gpios = <&gpio_spi 3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - hddfail-led { - label = "ix4-300d:hddfail:red"; - gpios = <&gpio_spi 4 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - }; - - /* - * Warning: you need both eth1 & 0 PHY initialized (i.e having - * them up does the tweak) for poweroff to shutdown otherwise it - * reboots - */ - gpio-poweroff { - compatible = "gpio-poweroff"; - pinctrl-0 = <&poweroff_pin>; - pinctrl-names = "default"; - gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; - }; -}; -&pciec { - status = "okay"; - - /* Quad port sata: Marvell 88SX7042 */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* USB 3.0 xHCI controller: NEC D720200F1 */ - pcie@5,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; -}; - -&mdio { - phy0: ethernet-phy@0 { /* Marvell 88E1318 */ - reg = <0>; - }; - - phy1: ethernet-phy@1 { /* Marvell 88E1318 */ - reg = <1>; - }; -}; - -&pinctrl { - poweroff_pin: poweroff-pin { - marvell,pins = "mpp24"; - marvell,function = "gpio"; - }; - - power_button_pin: power-button-pin { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - - reset_button_pin: reset-button-pin { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - select_button_pin: select-button-pin { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - - scroll_button_pin: scroll-button-pin { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - - hdd_led_pin: hdd-led-pin { - marvell,pins = "mpp26"; - marvell,function = "gpio"; - }; -}; |