diff options
Diffstat (limited to 'dts/src/arm/armada-xp-openblocks-ax3-4.dts')
-rw-r--r-- | dts/src/arm/armada-xp-openblocks-ax3-4.dts | 211 |
1 files changed, 0 insertions, 211 deletions
diff --git a/dts/src/arm/armada-xp-openblocks-ax3-4.dts b/dts/src/arm/armada-xp-openblocks-ax3-4.dts deleted file mode 100644 index 0efcc166da..0000000000 --- a/dts/src/arm/armada-xp-openblocks-ax3-4.dts +++ /dev/null @@ -1,211 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device Tree file for OpenBlocks AX3-4 board - * - * Copyright (C) 2012 Marvell - * - * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - */ - -/dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include "armada-xp-mv78260.dtsi" - -/ { - model = "PlatHome OpenBlocks AX3-4 board"; - compatible = "plathome,openblocks-ax3-4", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */ - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x01, 0x2f) 0 0 0xe8000000 0x8000000 - MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000 - MBUS_ID(0x0c, 0x04) 0 0 0xd1200000 0x100000>; - - devbus-bootcs { - status = "okay"; - - /* Device Bus parameters are required */ - - /* Read parameters */ - devbus,bus-width = <16>; - devbus,turn-off-ps = <60000>; - devbus,badr-skew-ps = <0>; - devbus,acc-first-ps = <124000>; - devbus,acc-next-ps = <248000>; - devbus,rd-setup-ps = <0>; - devbus,rd-hold-ps = <0>; - - /* Write parameters */ - devbus,sync-enable = <0>; - devbus,wr-high-ps = <60000>; - devbus,wr-low-ps = <60000>; - devbus,ale-wr-ps = <60000>; - - /* NOR 128 MiB */ - nor@0 { - compatible = "cfi-flash"; - reg = <0 0x8000000>; - bank-width = <2>; - }; - }; - - internal-regs { - rtc@10300 { - /* No crystal connected to the internal RTC */ - status = "disabled"; - }; - serial@12000 { - status = "okay"; - }; - serial@12100 { - status = "okay"; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; - - red_led { - label = "red_led"; - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - yellow_led { - label = "yellow_led"; - gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - green_led { - label = "green_led"; - gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - init { - label = "Init Button"; - linux,code = <KEY_POWER>; - gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; - }; - }; - - ethernet@70000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <0>; - }; - ethernet@74000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <1>; - }; - ethernet@30000 { - status = "okay"; - phy = <&phy2>; - phy-mode = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <2>; - }; - ethernet@34000 { - status = "okay"; - phy = <&phy3>; - phy-mode = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <3>; - }; - i2c@11000 { - status = "okay"; - clock-frequency = <400000>; - }; - i2c@11100 { - status = "okay"; - clock-frequency = <400000>; - - s35390a: s35390a@30 { - compatible = "s35390a"; - reg = <0x30>; - }; - }; - sata@a0000 { - nr-ports = <2>; - status = "okay"; - }; - - /* Front side USB 0 */ - usb@50000 { - status = "okay"; - }; - - /* Front side USB 1 */ - usb@51000 { - status = "okay"; - }; - - bm@c0000 { - status = "okay"; - }; - }; - - bm-bppi { - status = "okay"; - }; - }; -}; - -&pciec { - status = "okay"; - /* Internal mini-PCIe connector */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; -}; - -&mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - - phy2: ethernet-phy@2 { - reg = <2>; - }; - - phy3: ethernet-phy@3 { - reg = <3>; - }; -}; - -&pinctrl { - led_pins: led-pins-0 { - marvell,pins = "mpp49", "mpp51", "mpp53"; - marvell,function = "gpio"; - }; -}; |