diff options
Diffstat (limited to 'dts/src/arm/aspeed-bmc-opp-palmetto.dts')
| -rw-r--r-- | dts/src/arm/aspeed-bmc-opp-palmetto.dts | 206 |
1 files changed, 206 insertions, 0 deletions
diff --git a/dts/src/arm/aspeed-bmc-opp-palmetto.dts b/dts/src/arm/aspeed-bmc-opp-palmetto.dts index 4379d09a26..c7084a819d 100644 --- a/dts/src/arm/aspeed-bmc-opp-palmetto.dts +++ b/dts/src/arm/aspeed-bmc-opp-palmetto.dts @@ -2,6 +2,7 @@ /dts-v1/; #include "aspeed-g4.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> / { model = "Palmetto BMC"; @@ -26,6 +27,32 @@ reg = <0x5f000000 0x01000000>; /* 16M */ }; }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>; + }; + + power { + gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>; + }; + + identify { + gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(P, 5)>; + }; + }; }; &fmc { @@ -40,6 +67,9 @@ &spi { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1debug_default>; + flash@0 { status = "okay"; m25p,fast-read; @@ -47,6 +77,29 @@ }; }; +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flbusy_default &pinctrl_flwp_default + + &pinctrl_vgahs_default &pinctrl_vgavs_default + &pinctrl_ddcclk_default &pinctrl_ddcdat_default>; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + &uart5 { status = "okay"; }; @@ -111,3 +164,156 @@ &vuart { status = "okay"; }; + +&ibt { + status = "okay"; +}; + +&gpio { + pin_func_mode0 { + gpio-hog; + gpios = <ASPEED_GPIO(C, 4) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "func_mode0"; + }; + + pin_func_mode1 { + gpio-hog; + gpios = <ASPEED_GPIO(C, 5) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "func_mode1"; + }; + + pin_func_mode2 { + gpio-hog; + gpios = <ASPEED_GPIO(C, 6) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "func_mode2"; + }; + + pin_gpio_a0 { + gpio-hog; + gpios = <ASPEED_GPIO(A, 0) GPIO_ACTIVE_HIGH>; + input; + line-name = "BMC_FAN_RESERVED_N"; + }; + + pin_gpio_a1 { + gpio-hog; + gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "APSS_WDT_N"; + }; + + pin_gpio_b1 { + gpio-hog; + gpios = <ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "APSS_BOOT_MODE"; + }; + + pin_gpio_b2 { + gpio-hog; + gpios = <ASPEED_GPIO(B, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "APSS_RESET_N"; + }; + + pin_gpio_b7 { + gpio-hog; + gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "SPIVID_STBY_RESET_N"; + }; + + pin_gpio_d1 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_POWER_UP"; + }; + + pin_gpio_f1 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>; + input; + line-name = "BMC_BATTERY_TEST"; + }; + + pin_gpio_f4 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>; + input; + line-name = "AST_HW_FAULT_N"; + }; + + pin_gpio_f5 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>; + input; + line-name = "AST_SYS_FAULT_N"; + }; + + pin_gpio_f7 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 7) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_FULL_SPEED_N"; + }; + + pin_gpio_g3 { + gpio-hog; + gpios = <ASPEED_GPIO(G, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_FAN_ERROR_N"; + }; + + pin_gpio_g4 { + gpio-hog; + gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>; + input; + line-name = "BMC_WDT_RST1_P"; + }; + + pin_gpio_g5 { + gpio-hog; + gpios = <ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>; + input; + line-name = "BMC_WDT_RST2_P"; + }; + + pin_gpio_h0 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>; + input; + line-name = "PE_SLOT_TEST_EN_N"; + }; + + pin_gpio_h1 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>; + input; + line-name = "BMC_RTCRST_N"; + }; + + pin_gpio_h2 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "SYS_PWROK_BMC"; + }; + + pin_gpio_h6 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "SCM1_FSI0_DATA_EN"; + }; + + pin_gpio_h7 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_TPM_INT_N"; + }; +}; |