diff options
Diffstat (limited to 'dts/src/arm/aspeed-bmc-opp-zaius.dts')
| -rw-r--r-- | dts/src/arm/aspeed-bmc-opp-zaius.dts | 578 |
1 files changed, 0 insertions, 578 deletions
diff --git a/dts/src/arm/aspeed-bmc-opp-zaius.dts b/dts/src/arm/aspeed-bmc-opp-zaius.dts deleted file mode 100644 index 7ae4ea0d29..0000000000 --- a/dts/src/arm/aspeed-bmc-opp-zaius.dts +++ /dev/null @@ -1,578 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; -#include "aspeed-g5.dtsi" -#include <dt-bindings/gpio/aspeed-gpio.h> - -/ { - model = "Zaius BMC"; - compatible = "ingrasys,zaius-bmc", "aspeed,ast2500"; - - aliases { - i2c15 = &i2cpcie0; - i2c16 = &i2cpcie1; - i2c17 = &i2cpcie2; - i2c19 = &i2cpcie3; - i2c20 = &i2cpcie4; - }; - - chosen { - stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlycon"; - }; - - memory@80000000 { - reg = <0x80000000 0x40000000>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - flash_memory: region@98000000 { - no-map; - reg = <0x98000000 0x04000000>; /* 64M */ - }; - }; - - onewire0 { - compatible = "w1-gpio"; - gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>; - }; - - onewire1 { - compatible = "w1-gpio"; - gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>; - }; - - onewire2 { - compatible = "w1-gpio"; - gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>; - }; - - onewire3 { - compatible = "w1-gpio"; - gpios = <&gpio ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - checkstop { - label = "checkstop"; - gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(F, 7)>; - }; - - pcie-e2b-present{ - label = "pcie-e2b-present"; - gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(E, 7)>; - }; - }; - - leds { - compatible = "gpio-leds"; - - sys_boot_status { - label = "System boot status"; - gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_LOW>; - }; - - attention { - label = "Attention"; - gpios = <&gpio ASPEED_GPIO(D, 6) GPIO_ACTIVE_LOW>; - }; - - plt_fault { - label = "Platform fault"; - gpios = <&gpio ASPEED_GPIO(D, 7) GPIO_ACTIVE_LOW>; - }; - - hdd_fault { - label = "Onboard drive fault"; - gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>; - }; - }; - - fsi: gpio-fsi { - compatible = "fsi-master-gpio", "fsi-master"; - #address-cells = <2>; - #size-cells = <0>; - no-gpio-delays; - - trans-gpios = <&gpio ASPEED_GPIO(O, 6) GPIO_ACTIVE_HIGH>; - enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; - clock-gpios = <&gpio ASPEED_GPIO(G, 0) GPIO_ACTIVE_HIGH>; - data-gpios = <&gpio ASPEED_GPIO(G, 1) GPIO_ACTIVE_HIGH>; - mux-gpios = <&gpio ASPEED_GPIO(P, 6) GPIO_ACTIVE_HIGH>; - }; - - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, - <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, - <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, - <&adc 13>, <&adc 14>, <&adc 15>; - }; - - iio-hwmon-battery { - compatible = "iio-hwmon"; - io-channels = <&adc 12>; - }; - -}; - -&fmc { - status = "okay"; - - flash@0 { - status = "okay"; - label = "bmc"; - m25p,fast-read; - spi-max-frequency = <50000000>; -#include "openbmc-flash-layout.dtsi" - }; -}; - -&spi1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi1_default>; - - flash@0 { - status = "okay"; - label = "pnor"; - m25p,fast-read; - spi-max-frequency = <100000000>; - }; -}; - -&spi2 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi2ck_default - &pinctrl_spi2cs0_default - &pinctrl_spi2cs1_default - &pinctrl_spi2miso_default - &pinctrl_spi2mosi_default>; - - flash@0 { - status = "okay"; - }; -}; - -&uart1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd1_default - &pinctrl_rxd1_default>; -}; - -&lpc_ctrl { - status = "okay"; - memory-region = <&flash_memory>; - flash = <&spi1>; -}; - -&lpc_snoop { - status = "okay"; - snoop-ports = <0x80>; -}; - - -&uart5 { - status = "okay"; -}; - -&mac0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rmii1_default>; - clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, - <&syscon ASPEED_CLK_MAC1RCLK>; - clock-names = "MACCLK", "RCLK"; - use-ncsi; -}; - -&mac1 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; -}; - -&i2c0 { - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - pagesize = <32>; - }; - - rtc@68 { - compatible = "nxp,pcf8523"; - reg = <0x68>; - }; - - ucd90160@64 { - compatible = "ti,ucd90160"; - reg = <0x64>; - }; - - /* Power sequencer UCD90160 PMBUS @64h - * FRU AT24C64D @50h - * RTC PCF8523 @68h - * Clock buffer 9DBL04 @6dh - */ -}; - -&i2c1 { - status = "okay"; - - i2c-switch@71 { - compatible = "nxp,pca9546"; - reg = <0x71>; - #address-cells = <1>; - #size-cells = <0>; - - i2cpcie0: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - i2cpcie1: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - i2cpcie2: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - i2ctpm: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - }; - - /* MUX1 PCA9546A @71h - * PCIe 0 - * PCIe 1 - * PCIe 2 - * TPM header - */ -}; - -&i2c2 { - status = "disabled"; - - /* OCP Mezz Connector A (OOB SMBUS) */ -}; - -&i2c3 { - status = "disabled"; - - /* OCP Mezz Connector A (PCIe slot SMBUS) */ -}; - -&i2c4 { - status = "okay"; - - i2c-switch@71 { - compatible = "nxp,pca9546"; - reg = <0x71>; - #address-cells = <1>; - #size-cells = <0>; - - i2cpcie3: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - i2cpcie4: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - }; - - /* MUX1 PCA9546A @71h - * PCIe 3 - * PCIe 4 - */ -}; - - -&i2c5 { - status = "disabled"; - - /* CPU0 PRM 0.7V */ - /* CPU0 PRM 1.2V CH03 */ - /* CPU0 PRM 0.8V */ - /* CPU0 PRM 1.2V CH47 */ -}; - -&i2c6 { - status = "disabled"; - - /* CPU1 PRM 0.7V */ - /* CPU1 PRM 1.2V CH03 */ - /* CPU1 PRM 0.8V */ - /* CPU1 PRM 1.2V CH47 */ -}; - -&i2c7 { - status = "okay"; - - pca9541a@70 { - compatible = "nxp,pca9541"; - reg = <0x70>; - - i2c-arb { - #address-cells = <1>; - #size-cells = <0>; - - hotswap@54 { - compatible = "ti,lm5066i"; - reg = <0x54>; - }; - }; - - }; - - vrm@64 { - compatible = "isil,isl68137"; - reg = <0x64>; - }; - - vrm@40 { - compatible = "isil,isl68137"; - reg = <0x40>; - }; - - vrm@60 { - compatible = "isil,isl68137"; - reg = <0x60>; - }; - - vrm@43 { - compatible = "infineon,ir38064"; - reg = <0x43>; - }; - - vrm@41 { - compatible = "isil,isl68137"; - reg = <0x41>; - }; - - /* Master selector PCA9541A @70h (other master: CPU0) - * LM5066I PMBUS @10h - */ - - /* - * Brick will be one of these types/addresses. Depending - * on the board SKU only one is actually present and will successfully - * instantiate while the others will fail the probe operation. - * These are the PVT (and presumably beyond) addresses: - * 12V Quarter Brick DC/DC Converter Q54SJ12050 @6Ah - * 12V Quarter Brick DC/DC Converter Q54SH12050 @30h - */ - power-brick@6a { - compatible = "delta,dps800"; - reg = <0x6a>; - }; - power-brick@30 { - compatible = "delta,dps800"; - reg = <0x30>; - }; - - /* CPU0 VR ISL68137 0.7V, 0.96V PMBUS @64h */ - /* CPU0 VR ISL68137 1.2V CH03 PMBUS @40h */ - /* CPU0 VR ISL68137 0.8V PMBUS @60h */ - /* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @43h */ - /* CPU0 VR ISL68137 1.2V CH47 PMBUS @41h */ - /* Master selector PCA9541A @70h (other master: CPU0) - * LM5066I PMBUS @10h - */ -}; - -&i2c8 { - status = "okay"; - - vrm@64 { - compatible = "isil,isl68137"; - reg = <0x64>; - }; - - vrm@40 { - compatible = "isil,isl68137"; - reg = <0x40>; - }; - - vrm@41 { - compatible = "isil,isl68137"; - reg = <0x41>; - }; - - vrm@42 { - compatible = "infineon,ir38064"; - reg = <0x42>; - }; - - vrm@60 { - compatible = "isil,isl68137"; - reg = <0x60>; - }; - - /* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @64h */ - /* CPU1 VR ISL68137 1.2V CH03 PMBUS @40h */ - /* CPU1 VR ISL68137 1.2V CH47 PMBUS @41h */ - /* CPU1 VR 1.0V IR38064 I2C @12h, PMBUS @42h */ - /* CPU1 VR ISL68137 0.8V PMBUS @60h */ -}; - - -&i2c9 { - status = "disabled"; - - /* Fan board */ -}; - -&i2c10 { - status = "disabled"; -}; - -&i2c11 { - status = "disabled"; - - /* GPU sideband */ -}; - -&i2c12 { - status = "disabled"; -}; - -&i2c13 { - status = "disabled"; - - /* MUX PI3USB102 - * CPU0 debug - * CPU1 debug - */ -}; - -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; - - pinctrl_gpioh_unbiased: gpioi_unbiased { - pins = "A8", "C7", "B7", "A7", "D7", "B6", "A6", "E7"; - bias-disable; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpioh_unbiased>; - - gpio-line-names = - /*A0-A7*/ "","cfam-reset","","","","","","", - /*B0-B7*/ "","","","","","","","", - /*C0-C7*/ "","","","","","","","", - /*D0-D7*/ "fsi-enable","","","","","led-sys-boot-status","led-attention", - "led-fault", - /*E0-E7*/ "","","","","","","","presence-pcie-e2b", - /*F0-F7*/ "","","","","","","","checkstop", - /*G0-G7*/ "fsi-clock","fsi-data","","","","","","", - /*H0-H7*/ "onewire0","onewire1","onewire2","onewire3","","","","", - /*I0-I7*/ "","","","power-button","","","","", - /*J0-J7*/ "","","","","","","","", - /*K0-K7*/ "","","","","","","","", - /*L0-L7*/ "","","","","","","","", - /*M0-M7*/ "","","","","","","","", - /*N0-N7*/ "","","","","","","","", - /*O0-O7*/ "","","","","iso_u164_en","","fsi-trans","", - /*P0-P7*/ "ncsi_mux_en_n","bmc_i2c2_sw_rst_n","","bmc_i2c5_sw_rst_n","", - "","fsi-mux","", - /*Q0-Q7*/ "","","","","","","","", - /*R0-R7*/ "","","","","","","","", - /*S0-S7*/ "","","","","","","","", - /*T0-T7*/ "","","","","","","","", - /*U0-U7*/ "","","","","","","","", - /*V0-V7*/ "","","","","","","","", - /*W0-W7*/ "","","","","","","","", - /*X0-X7*/ "","","","","","","","", - /*Y0-Y7*/ "","","","","","","","", - /*Z0-Z7*/ "","","","","","","","", - /*AA0-AA7*/ "","","led-hdd-fault","","","","","", - /*AB0-AB7*/ "","","","","","","","", - /*AC0-AC7*/ "","","","","","","",""; - - line_iso_u146_en { - gpio-hog; - gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>; - output-high; - }; - - ncsi_mux_en_n { - gpio-hog; - gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>; - output-low; - }; - - line_bmc_i2c2_sw_rst_n { - gpio-hog; - gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>; - output-high; - }; - - line_bmc_i2c5_sw_rst_n { - gpio-hog; - gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>; - output-high; - }; -}; - -&vuart { - status = "okay"; -}; - -&gfx { - status = "okay"; -}; - -&pwm_tacho { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default - &pinctrl_pwm2_default &pinctrl_pwm3_default>; - - fan@0 { - reg = <0x00>; - aspeed,fan-tach-ch = /bits/ 8 <0x00>; - }; - - fan@1 { - reg = <0x01>; - aspeed,fan-tach-ch = /bits/ 8 <0x01>; - }; - - fan@2 { - reg = <0x02>; - aspeed,fan-tach-ch = /bits/ 8 <0x02>; - }; - - fan@3 { - reg = <0x03>; - aspeed,fan-tach-ch = /bits/ 8 <0x03>; - }; -}; - -&ibt { - status = "okay"; -}; - -#include "ibm-power9-dual.dtsi" |