1 files changed, 0 insertions, 90 deletions
diff --git a/dts/src/arm/at91-dvk_su60_somc_lcm.dtsi b/dts/src/arm/at91-dvk_su60_somc_lcm.dtsi
deleted file mode 100644
index df0f0cc575..0000000000
--- a/dts/src/arm/at91-dvk_su60_somc_lcm.dtsi
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * at91-dvk_su60_somc_lcm.dtsi - Device Tree file for the DVK SOM60 LCD board
- *
- *  Copyright (C) 2018 Laird,
- *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
- *
- */
-
-/ {
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&hlcdc_pwm 0 50000 0>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-
-	panel: panel {
-		compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92", "simple-panel";
-		backlight = <&backlight>;
-		power-supply = <&vcc_lcd_reg>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		port@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			panel_input: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&hlcdc_panel_output>;
-			};
-		};
-	};
-
-	vcc_lcd_reg: fixedregulator_lcd {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC LCM";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-		regulator-always-on;
-		status = "okay";
-	};
-};
-
-&pinctrl {
-	board {
-		pinctrl_lcd_ctp_int: lcd_ctp_int {
-			 atmel,pins =
-				 <AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-		};
-	};
-};
-
-&i2c1 {
-	status = "okay";
-
-	ft5426@38 {
-		compatible = "focaltech,ft5426", "edt,edt-ft5406";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd_ctp_int>;
-
-		interrupt-parent = <&pioC>;
-		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
-
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-	};
-};
-
-&hlcdc {
-	status = "okay";
-
-	hlcdc-display-controller {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-
-		port@0 {
-			hlcdc_panel_output: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&panel_input>;
-			};
-		};
-	};
-};