1 files changed, 0 insertions, 168 deletions
diff --git a/dts/src/arm/at91-foxg20.dts b/dts/src/arm/at91-foxg20.dts
deleted file mode 100644
index 7edf057047..0000000000
--- a/dts/src/arm/at91-foxg20.dts
+++ /dev/null
@@ -1,168 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91-foxg20.dts - Device Tree file for Acme Systems FoxG20 board
- *
- * Based on DT files for at91sam9g20ek evaluation board (AT91SAM9G20 SoC)
- *
- * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>
- */
-/dts-v1/;
-#include "at91sam9g20.dtsi"
-
-/ {
-	model = "Acme Systems FoxG20";
-	compatible = "acme,foxg20", "atmel,at91sam9g20", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		apb {
-			tcb0: timer@fffa0000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 6 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
-			mmc0: mmc@fffa8000 {
-				pinctrl-0 = <
-					&pinctrl_mmc0_clk
-					&pinctrl_mmc0_slot1_cmd_dat0
-					&pinctrl_mmc0_slot1_dat1_3>;
-				pinctrl-names = "default";
-				status = "okay";
-
-				slot@1 {
-					reg = <1>;
-					bus-width = <4>;
-				};
-			};
-
-			usart0: serial@fffb0000 {
-				pinctrl-0 =
-					<&pinctrl_usart0
-					 &pinctrl_usart0_rts
-					 &pinctrl_usart0_cts
-					>;
-				status = "okay";
-			};
-
-			usart1: serial@fffb4000 {
-				status = "okay";
-			};
-
-			usart2: serial@fffb8000 {
-				status = "okay";
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			usart3: serial@fffd0000 {
-				status = "okay";
-			};
-
-			uart0: serial@fffd4000 {
-				status = "okay";
-			};
-
-			uart1: serial@fffd8000 {
-				status = "okay";
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			pinctrl@fffff400 {
-				board {
-					pinctrl_pck0_as_mck: pck0_as_mck {
-						atmel,pins =
-							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				mmc0_slot1 {
-					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
-						atmel,pins =
-							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* CD pin */
-					};
-				};
-
-				i2c0 {
-					pinctrl_i2c0: i2c0-0 {
-						atmel,pins =
-							<AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE	/* TWD (SDA), open drain */
-							 AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>;	/* TWCK (SCL), open drain */
-					};
-				};
-			};
-
-			watchdog@fffffd40 {
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-	};
-
-	i2c-gpio-0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c0>;
-		i2c-gpio,delay-us = <5>;	/* ~85 kHz */
-		status = "okay";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		/* red LED marked "PC7" near mini USB (device) receptacle */
-		user_led {
-			label = "user_led";
-			gpios = <&pioC 7 GPIO_ACTIVE_HIGH>;	/* PC7 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		btn {
-			label = "Button";
-			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
-			linux,code = <0x103>;
-			wakeup-source;
-		};
-	};
-};