diff options
Diffstat (limited to 'dts/src/arm/at91-gatwick.dts')
-rw-r--r-- | dts/src/arm/at91-gatwick.dts | 121 |
1 files changed, 0 insertions, 121 deletions
diff --git a/dts/src/arm/at91-gatwick.dts b/dts/src/arm/at91-gatwick.dts deleted file mode 100644 index 5a81cab5fc..0000000000 --- a/dts/src/arm/at91-gatwick.dts +++ /dev/null @@ -1,121 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * at91-gatwick.dts - Device Tree file for the Gatwick board - * - * Copyright (C) 2018 Laird - * - */ -/dts-v1/; -#include "at91-wb50n.dtsi" -#include <dt-bindings/input/input.h> - -/ { - model = "Laird Workgroup Bridge 50N - Project Gatwick"; - compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - - gpio_keys { - compatible = "gpio-keys"; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_key_gpio>; - - reset-button { - label = "Reset Button"; - linux,code = <KEY_SETUP>; - gpios = <&pioE 31 GPIO_ACTIVE_LOW>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - - ethernet { - label = "gatwick:yellow:ethernet"; - gpios = <&pioA 10 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - wifi { - label = "gatwick:green:wifi"; - gpios = <&pioA 28 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - ble { - label = "gatwick:blue:ble"; - gpios = <&pioA 22 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - lora { - label = "gatwick:orange:lora"; - gpios = <&pioA 26 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - blank { - label = "gatwick:green:blank"; - gpios = <&pioA 24 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - user { - label = "gatwick:yellow:user"; - gpios = <&pioA 12 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; -}; - -&pinctrl { - board { - pinctrl_key_gpio: key_gpio_0 { - atmel,pins = - <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pullup deglitch */ - }; - }; -}; - -&mmc0 { - status = "okay"; -}; - -&macb1 { - status = "okay"; -}; - -&dbgu { - status = "okay"; -}; - -/* FTDI USART */ -&usart0 { - status = "okay"; -}; - -/* GPS USART */ -&usart1 { - pinctrl-0 = <&pinctrl_usart1>; - status = "okay"; -}; - -&spi1 { - status = "okay"; - - spidev@0 { - compatible = "semtech,sx1301"; - reg = <0>; - spi-max-frequency = <8000000>; - }; -}; - -&usb1 { - status = "okay"; - /delete-property/atmel,oc-gpio; -}; - -&usb2 { - status = "okay"; -}; |