1 files changed, 0 insertions, 121 deletions
diff --git a/dts/src/arm/at91-gatwick.dts b/dts/src/arm/at91-gatwick.dts
deleted file mode 100644
index 5a81cab5fc..0000000000
--- a/dts/src/arm/at91-gatwick.dts
+++ /dev/null
@@ -1,121 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * at91-gatwick.dts - Device Tree file for the Gatwick board
- *
- *  Copyright (C) 2018 Laird
- *
- */
-/dts-v1/;
-#include "at91-wb50n.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Laird Workgroup Bridge 50N - Project Gatwick";
-	compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_key_gpio>;
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_SETUP>;
-			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		ethernet {
-			label = "gatwick:yellow:ethernet";
-			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		wifi {
-			label = "gatwick:green:wifi";
-			gpios = <&pioA 28 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		ble {
-			label = "gatwick:blue:ble";
-			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		lora {
-			label = "gatwick:orange:lora";
-			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		blank {
-			label = "gatwick:green:blank";
-			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		user {
-			label = "gatwick:yellow:user";
-			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-};
-
-&pinctrl {
-	board {
-		pinctrl_key_gpio: key_gpio_0 {
-		  atmel,pins =
-			  <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pullup deglitch */
-	  };
-	};
-};
-
-&mmc0 {
-	status = "okay";
-};
-
-&macb1 {
-	status = "okay";
-};
-
-&dbgu {
-	status = "okay";
-};
-
-/* FTDI USART */
-&usart0 {
-	status = "okay";
-};
-
-/* GPS USART */
-&usart1 {
-	pinctrl-0 = <&pinctrl_usart1>;
-	status = "okay";
-};
-
-&spi1 {
-	status = "okay";
-
-	spidev@0 {
-		compatible = "semtech,sx1301";
-		reg = <0>;
-		spi-max-frequency = <8000000>;
-	};
-};
-
-&usb1 {
-	status = "okay";
-	/delete-property/atmel,oc-gpio;
-};
-
-&usb2 {
-	status = "okay";
-};