diff options
Diffstat (limited to 'dts/src/arm/at91-kizbox2-common.dtsi')
| -rw-r--r-- | dts/src/arm/at91-kizbox2-common.dtsi | 258 |
1 files changed, 0 insertions, 258 deletions
diff --git a/dts/src/arm/at91-kizbox2-common.dtsi b/dts/src/arm/at91-kizbox2-common.dtsi deleted file mode 100644 index c08834ddf0..0000000000 --- a/dts/src/arm/at91-kizbox2-common.dtsi +++ /dev/null @@ -1,258 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * at91-kizbox2_common.dtsi - Device Tree Include file for - * Overkiz Kizbox 2 family SoC - * - * Copyright (C) 2014-2018 Overkiz SAS - * - * Authors: Antoine Aubert <a.aubert@overkiz.com> - * Gaël Portay <g.portay@overkiz.com> - * Kévin Raymond <k.raymond@overkiz.com> - */ -#include "sama5d31.dtsi" - -/ { - chosen { - bootargs = "ubi.mtd=ubi"; - stdout-path = &dbgu; - }; - - memory@20000000 { - reg = <0x20000000 0x10000000>; - }; - - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <12000000>; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - prog { - label = "PB_PROG"; - gpios = <&pioE 27 GPIO_ACTIVE_LOW>; - linux,code = <0x102>; - wakeup-source; - }; - - reset { - label = "PB_RST"; - gpios = <&pioE 29 GPIO_ACTIVE_LOW>; - linux,code = <0x100>; - wakeup-source; - }; - - user { - label = "PB_USER"; - gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; - linux,code = <0x101>; - wakeup-source; - }; - }; - - led-controller { - compatible = "pwm-leds"; - - led-1 { - label = "pwm:blue:user"; - pwms = <&pwm0 2 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "none"; - }; - - led-2 { - label = "pwm:green:user"; - pwms = <&pwm0 1 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - - led-3 { - label = "pwm:red:user"; - pwms = <&pwm0 0 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - }; -}; - -&i2c1 { - status = "okay"; - - pmic: act8865@5b { - compatible = "active-semi,act8865"; - reg = <0x5b>; - status = "okay"; - - regulators { - vcc_1v8_reg: DCDC_REG1 { - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcc_1v2_reg: DCDC_REG2 { - regulator-name = "VCC_1V2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vcc_3v3_reg: DCDC_REG3 { - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vddfuse_reg: LDO_REG1 { - regulator-name = "FUSE_2V5"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - - vddana_reg: LDO_REG2 { - regulator-name = "VDDANA"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vled_reg: LDO_REG3 { - regulator-name = "VLED"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - v3v8_rf_reg: LDO_REG4 { - regulator-name = "V3V8_RF"; - regulator-min-microvolt = <3800000>; - regulator-max-microvolt = <3800000>; - regulator-always-on; - }; - }; - }; -}; - -&usart0 { - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "disabled"; -}; - -&usart1 { - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "disabled"; -}; - -&usart2 { - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "disabled"; -}; - -&pwm0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm0_pwmh0_1 - &pinctrl_pwm0_pwmh1_1 - &pinctrl_pwm0_pwmh2_0>; - status = "okay"; -}; - -&adc0 { - atmel,adc-vref = <3333>; - status = "okay"; -}; - -&macb1 { - phy-mode = "rmii"; - status = "okay"; -}; - -&dbgu { - status = "okay"; -}; - -&watchdog { - status = "okay"; -}; - -&ebi { - pinctrl-0 = <&pinctrl_ebi_nand_addr>; - pinctrl-names = "default"; - status = "okay"; -}; - -&nand_controller { - status = "okay"; - - nand@3 { - reg = <0x3 0x0 0x2>; - atmel,rb = <0>; - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x20000>; - }; - - ubi@20000 { - label = "ubi"; - reg = <0x20000 0x7fe0000>; - }; - }; - }; -}; - -&usb1 { - status = "okay"; -}; - -&usb2 { - status = "okay"; -}; - -/* WMBUS (inverted with IO in the latest schematic) */ -&pinctrl_usart0 { - atmel,pins = - <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE - AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP - AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; -}; - -/* RTS */ -&pinctrl_usart1 { - atmel,pins = - <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE - AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP - AT91_PIOE 7 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; -}; - -/* IO (inverted with WMBUS in the latest schematic) */ -&pinctrl_usart2 { - atmel,pins = - <AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE - AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP - AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; -}; |