diff options
Diffstat (limited to 'dts/src/arm/at91-kizbox3-hs.dts')
-rw-r--r-- | dts/src/arm/at91-kizbox3-hs.dts | 309 |
1 files changed, 0 insertions, 309 deletions
diff --git a/dts/src/arm/at91-kizbox3-hs.dts b/dts/src/arm/at91-kizbox3-hs.dts deleted file mode 100644 index 2799b2a1f4..0000000000 --- a/dts/src/arm/at91-kizbox3-hs.dts +++ /dev/null @@ -1,309 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * at91-kizbox3-hs.dts - Device Tree file for Overkiz KIZBOX3-HS board - * - * Copyright (C) 2018 Overkiz SAS - * - * Authors: Dorian Rocipon <d.rocipon@overkiz.com> - * Kevin Carli <k.carli@overkiz.com> - * Mickael Gardet <m.gardet@overkiz.com> - */ -/dts-v1/; -#include "at91-kizbox3_common.dtsi" - -/ { - model = "Overkiz KIZBOX3-HS"; - compatible = "overkiz,kizbox3-hs", "atmel,sama5d2", "atmel,sama5"; - - led-controller-1 { - status = "okay"; - - led-1 { - status = "okay"; - }; - - led-2 { - status = "okay"; - }; - - led-3 { - status = "okay"; - }; - - led-4 { - status = "okay"; - }; - }; - - led-controller-2 { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_led_red - &pinctrl_led_white>; - status = "okay"; - - led-5 { - label = "pio:red:user"; - gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - led-6 { - label = "pio:white:user"; - gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - pinctrl-names = "default" , "default", "default", - "default", "default" ; - pinctrl-0 = <&pinctrl_key_gpio_default>; - pinctrl-1 = <&pinctrl_pio_rf &pinctrl_pio_wifi>; - pinctrl-2 = <&pinctrl_pio_io_boot - &pinctrl_pio_io_reset - &pinctrl_pio_io_test_radio>; - pinctrl-3 = <&pinctrl_pio_zbe_test_radio - &pinctrl_pio_zbe_rst>; - pinctrl-4 = <&pinctrl_pio_input>; - - SW1 { - label = "SW1"; - gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>; - linux,code = <0x101>; - wakeup-source; - }; - - SW2 { - label = "SW2"; - gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>; - linux,code = <0x102>; - wakeup-source; - }; - - SW3 { - label = "SW3"; - gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>; - linux,code = <0x103>; - wakeup-source; - }; - - SW7 { - label = "SW7"; - gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>; - linux,code = <0x107>; - wakeup-source; - }; - - SW8 { - label = "SW8"; - gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>; - linux,code = <0x108>; - wakeup-source; - }; - }; - - gpios { - compatible = "gpio"; - status = "okay"; - - rf_on { - label = "rf on"; - gpio = <&pioA PIN_PC19 GPIO_ACTIVE_HIGH>; - output; - init-low; - }; - - wifi_on { - label = "wifi on"; - gpio = <&pioA PIN_PC20 GPIO_ACTIVE_HIGH>; - output; - init-low; - }; - - zbe_test_radio { - label = "zbe test radio"; - gpio = <&pioA PIN_PB21 GPIO_ACTIVE_HIGH>; - output; - init-low; - }; - - zbe_rst { - label = "zbe rst"; - gpio = <&pioA PIN_PB25 GPIO_ACTIVE_HIGH>; - output; - init-low; - }; - - io_reset { - label = "io reset"; - gpio = <&pioA PIN_PB30 GPIO_ACTIVE_HIGH>; - output; - init-low; - }; - - io_test_radio { - label = "io test radio"; - gpio = <&pioA PIN_PC9 GPIO_ACTIVE_HIGH>; - output; - init-low; - }; - - io_boot_0 { - label = "io boot 0"; - gpio = <&pioA PIN_PC11 GPIO_ACTIVE_HIGH>; - output; - init-low; - }; - - io_boot_1 { - label = "io boot 1"; - gpio = <&pioA PIN_PC17 GPIO_ACTIVE_HIGH>; - output; - init-low; - }; - - verbose_bootloader { - label = "verbose bootloader"; - gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>; - input; - }; - - nail_bed_detection { - label = "nail bed detection"; - gpio = <&pioA PIN_PB12 GPIO_ACTIVE_HIGH>; - input; - }; - - id_usba { - label = "id usba"; - gpio = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>; - input; - }; - }; -}; - -&pioA { - pinctrl_key_gpio_default: key_gpio_default { - pinmux= <PIN_PA22__GPIO>, - <PIN_PA24__GPIO>, - <PIN_PA26__GPIO>, - <PIN_PA29__GPIO>, - <PIN_PA18__GPIO>; - bias-disable; - }; - - pinctrl_gpio { - pinctrl_pio_rf: gpio_rf { - pinmux = <PIN_PC19__GPIO>; - bias-disable; - }; - pinctrl_pio_wifi: gpio_wifi { - pinmux = <PIN_PC20__GPIO>; - bias-disable; - }; - pinctrl_pio_io_boot: gpio_io_boot { - pinmux = - <PIN_PC11__GPIO>, - <PIN_PC17__GPIO>; - bias-disable; - }; - pinctrl_pio_io_test_radio: gpio_io_test_radio { - pinmux = <PIN_PC9__GPIO>; - bias-disable; - }; - pinctrl_pio_zbe_test_radio: gpio_zbe_test_radio { - pinmux = <PIN_PB21__GPIO>; - bias-disable; - }; - pinctrl_pio_zbe_rst: gpio_zbe_rst { - pinmux = <PIN_PB25__GPIO>; - bias-disable; - }; - /* stm32 reset must be open drain (internal pull up) */ - pinctrl_pio_io_reset: gpio_io_reset { - pinmux = <PIN_PB30__GPIO>; - bias-disable; - drive-open-drain = <1>; - output-low; - }; - pinctrl_pio_input: gpio_input { - pinmux = - <PIN_PB11__GPIO>, - <PIN_PB12__GPIO>, - <PIN_PC0__GPIO>; - bias-disable; - }; - }; - - pinctrl_leds { - pinctrl_led_red: led_red { - pinmux = <PIN_PB1__GPIO>; - bias-disable; - }; - pinctrl_led_white: led_white { - pinmux = <PIN_PB8__GPIO>; - bias-disable; - }; - }; -}; - -&adc { - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&uart3 { - status = "okay"; -}; - -&uart4 { - status = "okay"; -}; - -&flx0 { - status = "okay"; - - uart5: serial@200 { - status = "okay"; - }; -}; - -&flx3 { - status = "okay"; - uart8: serial@200 { - status = "okay"; - }; -}; - -&flx4 { - status = "okay"; - - i2c6: i2c@600 { - status = "okay"; - }; -}; - -&usb0 { - status = "okay"; -}; - -&usb1 { - status = "okay"; -}; - -&usb2 { - status = "okay"; -}; |