1 files changed, 0 insertions, 170 deletions
diff --git a/dts/src/arm/at91-kizboxmini-common.dtsi b/dts/src/arm/at91-kizboxmini-common.dtsi
deleted file mode 100644
index 9c622892c6..0000000000
--- a/dts/src/arm/at91-kizboxmini-common.dtsi
+++ /dev/null
@@ -1,170 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
- *
- * Copyright (C) 2014-2018 Overkiz SAS
- *   Author: Antoine Aubert <a.aubert@overkiz.com>
- *           Gaël Portay <g.portay@overkiz.com>
- *           Kévin Raymond <k.raymond@overkiz.com>
- *           Dorian Rocipon <d.rocipon@overkiz.com>
- */
-#include "at91sam9g25.dtsi"
-
-/ {
-	chosen {
-		bootargs = "ubi.mtd=ubi";
-		stdout-path = &dbgu;
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x8000000>;
-	};
-
-	clocks {
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		adc_op_clk {
-			status = "disabled";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		prog {
-			label = "PB_PROG";
-			gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
-			linux,code = <0x102>;
-			wakeup-source;
-		};
-
-		reset {
-			label = "PB_RST";
-			gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-			wakeup-source;
-		};
-	};
-
-	leds: led-controller-1 {
-		compatible = "pwm-leds";
-
-		led_blue: led-1 {
-			label = "pwm:blue:user";
-			pwms = <&pwm0 2 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "none";
-			status = "disabled";
-		};
-
-		led_green: led-2 {
-			label = "pwm:green:user";
-			pwms = <&pwm0 0 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		led_red: led-3 {
-			label = "pwm:red:user";
-			pwms = <&pwm0 1 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-	};
-};
-
-&usart0 {
-	atmel,use-dma-rx;
-	atmel,use-dma-tx;
-	status = "okay";
-};
-
-&macb0 {
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&pwm0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_pwm0_1
-		     &pinctrl_pwm0_pwm1_1
-		     &pinctrl_pwm0_pwm2_1>;
-	status = "okay";
-};
-
-&dbgu {
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};
-
-&adc0 {
-	status = "disabled";
-};
-
-&rtc {
-	status = "disabled";
-};
-
-&ebi {
-	pinctrl-0 = <&pinctrl_ebi_addr_nand
-			&pinctrl_ebi_data_0_7>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&nand_controller {
-	status = "okay";
-	pinctrl-0 = <&pinctrl_nand_oe_we
-		     &pinctrl_nand_cs
-		     &pinctrl_nand_rb>;
-	pinctrl-names = "default";
-
-	nand@3 {
-		reg = <0x3 0x0 0x800000>;
-		rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
-		nand-bus-width = <8>;
-		nand-ecc-mode = "hw";
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-		nand-on-flash-bbt;
-		label = "atmel_nand";
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			bootstrap@0 {
-				label = "bootstrap";
-				reg = <0x0 0x20000>;
-			};
-
-			ubi@20000 {
-				label = "ubi";
-				reg = <0x20000 0x7fe0000>;
-			};
-		};
-	};
-};
-
-&usb0 {
-	num-ports = <1>;
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-