diff options
Diffstat (limited to 'dts/src/arm/at91-kizboxmini-common.dtsi')
-rw-r--r-- | dts/src/arm/at91-kizboxmini-common.dtsi | 170 |
1 files changed, 0 insertions, 170 deletions
diff --git a/dts/src/arm/at91-kizboxmini-common.dtsi b/dts/src/arm/at91-kizboxmini-common.dtsi deleted file mode 100644 index 9c622892c6..0000000000 --- a/dts/src/arm/at91-kizboxmini-common.dtsi +++ /dev/null @@ -1,170 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board - * - * Copyright (C) 2014-2018 Overkiz SAS - * Author: Antoine Aubert <a.aubert@overkiz.com> - * Gaël Portay <g.portay@overkiz.com> - * Kévin Raymond <k.raymond@overkiz.com> - * Dorian Rocipon <d.rocipon@overkiz.com> - */ -#include "at91sam9g25.dtsi" - -/ { - chosen { - bootargs = "ubi.mtd=ubi"; - stdout-path = &dbgu; - }; - - memory@20000000 { - reg = <0x20000000 0x8000000>; - }; - - clocks { - main_xtal { - clock-frequency = <12000000>; - }; - - slow_xtal { - clock-frequency = <32768>; - }; - - adc_op_clk { - status = "disabled"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - prog { - label = "PB_PROG"; - gpios = <&pioC 17 GPIO_ACTIVE_LOW>; - linux,code = <0x102>; - wakeup-source; - }; - - reset { - label = "PB_RST"; - gpios = <&pioC 16 GPIO_ACTIVE_LOW>; - linux,code = <0x100>; - wakeup-source; - }; - }; - - leds: led-controller-1 { - compatible = "pwm-leds"; - - led_blue: led-1 { - label = "pwm:blue:user"; - pwms = <&pwm0 2 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "none"; - status = "disabled"; - }; - - led_green: led-2 { - label = "pwm:green:user"; - pwms = <&pwm0 0 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - - led_red: led-3 { - label = "pwm:red:user"; - pwms = <&pwm0 1 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - }; -}; - -&usart0 { - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "okay"; -}; - -&macb0 { - phy-mode = "rmii"; - status = "okay"; -}; - -&pwm0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm0_pwm0_1 - &pinctrl_pwm0_pwm1_1 - &pinctrl_pwm0_pwm2_1>; - status = "okay"; -}; - -&dbgu { - status = "okay"; -}; - -&watchdog { - status = "okay"; -}; - -&adc0 { - status = "disabled"; -}; - -&rtc { - status = "disabled"; -}; - -&ebi { - pinctrl-0 = <&pinctrl_ebi_addr_nand - &pinctrl_ebi_data_0_7>; - pinctrl-names = "default"; - status = "okay"; -}; - -&nand_controller { - status = "okay"; - pinctrl-0 = <&pinctrl_nand_oe_we - &pinctrl_nand_cs - &pinctrl_nand_rb>; - pinctrl-names = "default"; - - nand@3 { - reg = <0x3 0x0 0x800000>; - rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x20000>; - }; - - ubi@20000 { - label = "ubi"; - reg = <0x20000 0x7fe0000>; - }; - }; - }; -}; - -&usb0 { - num-ports = <1>; - status = "okay"; -}; - -&usb1 { - status = "okay"; -}; - |