diff options
Diffstat (limited to 'dts/src/arm/at91-qil_a9260.dts')
| -rw-r--r-- | dts/src/arm/at91-qil_a9260.dts | 215 |
1 files changed, 0 insertions, 215 deletions
diff --git a/dts/src/arm/at91-qil_a9260.dts b/dts/src/arm/at91-qil_a9260.dts deleted file mode 100644 index 969d990767..0000000000 --- a/dts/src/arm/at91-qil_a9260.dts +++ /dev/null @@ -1,215 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * at91-qil_a9260.dts - Device Tree file for Calao QIL A9260 board - * - * Copyright (C) 2011-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - */ -/dts-v1/; -#include "at91sam9260.dtsi" -/ { - model = "Calao QIL A9260"; - compatible = "calao,qil-a9260", "atmel,at91sam9260", "atmel,at91sam9"; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - memory@20000000 { - reg = <0x20000000 0x4000000>; - }; - - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <12000000>; - }; - }; - - ahb { - apb { - tcb0: timer@fffa0000 { - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>, <1>; - }; - - timer@2 { - compatible = "atmel,tcb-timer"; - reg = <2>; - }; - }; - - usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - - mmc0: mmc@fffa8000 { - pinctrl-0 = < - &pinctrl_mmc0_clk - &pinctrl_mmc0_slot0_cmd_dat0 - &pinctrl_mmc0_slot0_dat1_3>; - pinctrl-names = "default"; - status = "okay"; - slot@0 { - reg = <0>; - bus-width = <4>; - }; - }; - - usart0: serial@fffb0000 { - pinctrl-0 = - <&pinctrl_usart0 - &pinctrl_usart0_rts - &pinctrl_usart0_cts - &pinctrl_usart0_dtr_dsr - &pinctrl_usart0_dcd - &pinctrl_usart0_ri>; - status = "okay"; - }; - - usart1: serial@fffb4000 { - pinctrl-0 = - <&pinctrl_usart1 - &pinctrl_usart1_rts - &pinctrl_usart1_cts>; - status = "okay"; - }; - - usart2: serial@fffb8000 { - pinctrl-0 = - <&pinctrl_usart2 - &pinctrl_usart2_rts - &pinctrl_usart2_cts>; - status = "okay"; - }; - - macb0: ethernet@fffc4000 { - phy-mode = "rmii"; - status = "okay"; - }; - - spi0: spi@fffc8000 { - status = "okay"; - cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>; - - m41t94@0 { - compatible = "st,m41t94"; - reg = <0>; - spi-max-frequency = <1000000>; - }; - - }; - - dbgu: serial@fffff200 { - status = "okay"; - }; - - shdwc@fffffd10 { - atmel,wakeup-counter = <10>; - atmel,wakeup-rtt-timer; - }; - }; - - usb0: ohci@500000 { - num-ports = <2>; - status = "okay"; - }; - - ebi: ebi@10000000 { - status = "okay"; - - nand_controller: nand-controller { - status = "okay"; - pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; - pinctrl-names = "default"; - - nand@3 { - reg = <0x3 0x0 0x800000>; - rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x20000>; - }; - - barebox@20000 { - label = "barebox"; - reg = <0x20000 0x40000>; - }; - - bareboxenv@60000 { - label = "bareboxenv"; - reg = <0x60000 0x20000>; - }; - - bareboxenv2@80000 { - label = "bareboxenv2"; - reg = <0x80000 0x20000>; - }; - - oftree@a0000 { - label = "oftree"; - reg = <0xa0000 0x20000>; - }; - - kernel@c0000 { - label = "kernel"; - reg = <0xc0000 0x400000>; - }; - - rootfs@4c0000 { - label = "rootfs"; - reg = <0x4c0000 0x7800000>; - }; - - data@7cc0000 { - label = "data"; - reg = <0x7cc0000 0x8340000>; - }; - }; - }; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - user_led { - label = "user_led"; - gpios = <&pioB 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - user_pb { - label = "user_pb"; - gpios = <&pioB 10 GPIO_ACTIVE_LOW>; - linux,code = <28>; - wakeup-source; - }; - }; - - i2c-gpio-0 { - status = "okay"; - }; -}; |