diff options
Diffstat (limited to 'dts/src/arm/at91-sama5d27_som1_ek.dts')
| -rw-r--r-- | dts/src/arm/at91-sama5d27_som1_ek.dts | 52 |
1 files changed, 26 insertions, 26 deletions
diff --git a/dts/src/arm/at91-sama5d27_som1_ek.dts b/dts/src/arm/at91-sama5d27_som1_ek.dts index 60cb084a8d..6d87b4eb6c 100644 --- a/dts/src/arm/at91-sama5d27_som1_ek.dts +++ b/dts/src/arm/at91-sama5d27_som1_ek.dts @@ -53,19 +53,27 @@ model = "Atmel SAMA5D27 SOM1 EK"; compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; + aliases { + serial0 = &uart1; /* DBGU */ + serial1 = &uart4; /* mikro BUS 1 */ + serial2 = &uart2; /* mikro BUS 2 */ + i2c1 = &i2c1; + i2c2 = &i2c2; + }; + chosen { stdout-path = "serial0:115200n8"; }; ahb { - usb0: gadget@00300000 { + usb0: gadget@300000 { atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@00400000 { + usb1: ohci@400000 { num-ports = <3>; atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */ &pioA PIN_PA27 GPIO_ACTIVE_HIGH @@ -76,7 +84,7 @@ status = "okay"; }; - usb2: ehci@00500000 { + usb2: ehci@500000 { status = "okay"; }; @@ -128,12 +136,14 @@ }; pwm0: pwm@f802c000 { - status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>; + status = "disabled"; /* Conflict with leds. */ }; flx1: flexcom@f8038000 { atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; - status = "disabled"; + status = "okay"; i2c2: i2c@600 { compatible = "atmel,sama5d2-i2c"; @@ -147,7 +157,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mikrobus_i2c>; atmel,fifo-size = <16>; - status = "disabled"; + status = "okay"; }; }; @@ -165,17 +175,12 @@ status = "okay"; }; - can0: can@f8054000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can0_default>; - }; - uart3: serial@fc008000 { atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3_default>; - status = "disabled"; + status = "disabled"; /* Conflict with isc. */ }; uart4: serial@fc00c000 { @@ -199,7 +204,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx3_default>; atmel,fifo-size = <32>; - status = "disabled"; + status = "disabled"; /* Conflict with isc. */ }; spi2: spi@400 { @@ -211,7 +216,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx3_default>; atmel,fifo-size = <16>; - status = "disabled"; + status = "disabled"; /* Conflict with isc. */ }; }; @@ -228,7 +233,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; atmel,fifo-size = <32>; - status = "disabled"; + status = "disabled"; /* Conflict with spi3 and i2c3. */ }; spi3: spi@400 { @@ -240,7 +245,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>; atmel,fifo-size = <16>; - status = "okay"; + status = "okay"; /* Conflict with uart6 and i2c3. */ }; i2c3: i2c@600 { @@ -255,7 +260,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; atmel,fifo-size = <16>; - status = "disabled"; + status = "disabled"; /* Conflict with uart6 and spi3. */ }; }; @@ -268,12 +273,6 @@ pinctrl@fc038000 { - pinctrl_can0_default: can0_default { - pinmux = <PIN_PC10__CANTX0>, - <PIN_PC11__CANRX0>; - bias-disable; - }; - pinctrl_can1_default: can1_default { pinmux = <PIN_PC26__CANTX1>, <PIN_PC27__CANRX1>; @@ -350,7 +349,7 @@ <PIN_PA7__SDMMC0_DAT5>, <PIN_PA8__SDMMC0_DAT6>, <PIN_PA9__SDMMC0_DAT7>; - bias-pull-up; + bias-disable; }; ck_cd_vddsel { @@ -368,7 +367,7 @@ <PIN_PA19__SDMMC1_DAT1>, <PIN_PA20__SDMMC1_DAT2>, <PIN_PA21__SDMMC1_DAT3>; - bias-pull-up; + bias-disable; }; conf-ck_cd { @@ -512,6 +511,7 @@ label = "USER"; gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>; linux,code = <0x104>; + wakeup-source; }; }; @@ -519,7 +519,7 @@ compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_led_gpio_default>; - status = "okay"; + status = "okay"; /* Conflict with pwm0. */ red { label = "red"; |