diff options
Diffstat (limited to 'dts/src/arm/at91-sama5d27_wlsom1_ek.dts')
-rw-r--r-- | dts/src/arm/at91-sama5d27_wlsom1_ek.dts | 270 |
1 files changed, 0 insertions, 270 deletions
diff --git a/dts/src/arm/at91-sama5d27_wlsom1_ek.dts b/dts/src/arm/at91-sama5d27_wlsom1_ek.dts deleted file mode 100644 index 0b9fa2942d..0000000000 --- a/dts/src/arm/at91-sama5d27_wlsom1_ek.dts +++ /dev/null @@ -1,270 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * at91-sama5d27_wlsom1_ek.dts - Device Tree file for SAMA5D27 WLSOM1 EK - * - * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries - * - * Author: Nicolas Ferre <nicolas.ferre@microcihp.com> - */ -/dts-v1/; -#include "at91-sama5d27_wlsom1.dtsi" - -/ { - model = "Microchip SAMA5D27 WLSOM1 EK"; - compatible = "microchip,sama5d27-wlsom1-ek", "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; - - aliases { - serial0 = &uart0; /* DBGU */ - serial1 = &uart6; /* BT */ - serial2 = &uart5; /* mikro BUS 2 */ - serial3 = &uart3; /* mikro BUS 1 */ - i2c1 = &i2c1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio_keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_key_gpio_default>; - status = "okay"; - - sw4 { - label = "USER BUTTON"; - gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>; - linux,code = <0x104>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_led_gpio_default>; - status = "okay"; - - red { - label = "red"; - gpios = <&pioA PIN_PA6 GPIO_ACTIVE_HIGH>; - }; - - green { - label = "green"; - gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>; - }; - - blue { - label = "blue"; - gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; -}; - -&adc { - vddana-supply = <&vdd_3v3>; - vref-supply = <&vdd_3v3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_adc_default>; - status = "okay"; -}; - -&flx0 { - atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; - status = "okay"; - - uart5: serial@200 { - compatible = "atmel,at91sam9260-usart"; - reg = <0x200 0x200>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | - AT91_XDMAC_DT_PERID(11))>, - <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | - AT91_XDMAC_DT_PERID(12))>; - dma-names = "tx", "rx"; - clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; - clock-names = "usart"; - pinctrl-0 = <&pinctrl_flx0_default>; - pinctrl-names = "default"; - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "okay"; - }; -}; - -&flx1 { - status = "okay"; - - uart6: serial@200 { - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "okay"; - }; -}; - -&macb0 { - status = "okay"; -}; - -&pioA { - /* - * There is no real pinmux for ADC, if the pin - * is not requested by another peripheral then - * the muxing is done when channel is enabled. - * Requesting pins for ADC is GPIO is - * encouraged to prevent conflicts and to - * disable bias in order to be in the same - * state when the pin is not muxed to the adc. - */ - pinctrl_adc_default: adc_default { - pinmux = <PIN_PD25__GPIO>, - <PIN_PD26__GPIO>; - bias-disable; - }; - - pinctrl_flx0_default: flx0_usart_default { - pinmux = <PIN_PB28__FLEXCOM0_IO0>, - <PIN_PB29__FLEXCOM0_IO1>; - bias-disable; - }; - - pinctrl_key_gpio_default: key_gpio_default { - pinmux = <PIN_PB2__GPIO>; - bias-pull-up; - }; - - pinctrl_led_gpio_default: led_gpio_default { - pinmux = <PIN_PA6__GPIO>, - <PIN_PA7__GPIO>, - <PIN_PA8__GPIO>; - bias-pull-down; - }; - - pinctrl_sdmmc0_default: sdmmc0_default { - cmd_data { - pinmux = <PIN_PA1__SDMMC0_CMD>, - <PIN_PA2__SDMMC0_DAT0>, - <PIN_PA3__SDMMC0_DAT1>, - <PIN_PA4__SDMMC0_DAT2>, - <PIN_PA5__SDMMC0_DAT3>; - bias-disable; - }; - - ck_cd_vddsel { - pinmux = <PIN_PA0__SDMMC0_CK>, - <PIN_PA11__SDMMC0_VDDSEL>, - <PIN_PA12__SDMMC0_WP>, - <PIN_PA13__SDMMC0_CD>; - bias-disable; - }; - }; - - pinctrl_uart0_default: uart0_default { - pinmux = <PIN_PB26__URXD0>, - <PIN_PB27__UTXD0>; - bias-disable; - }; - - pinctrl_uart3_default: uart3_default { - pinmux = <PIN_PB11__URXD3>, - <PIN_PB12__UTXD3>; - bias-disable; - }; - - pinctrl_pwm0_default: pwm0_default { - pinmux = <PIN_PA31__PWML0>, - <PIN_PA30__PWMH0>; - bias-disable; - }; - - pinctrl_usb_default: usb_default { - pinmux = <PIN_PA10__GPIO>; - bias-disable; - }; -}; - -&pwm0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm0_default>; - status = "okay"; -}; - -&qspi1 { - status = "okay"; - - qspi1_flash: spi_flash@0 { - status = "okay"; - }; -}; - -&sdmmc0 { - bus-width = <4>; - mmc-ddr-3_3v; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sdmmc0_default>; - status = "okay"; -}; - -&shutdown_controller { - atmel,shdwc-debouncer = <976>; - atmel,wakeup-rtc-timer; - - input@0 { - reg = <0>; - atmel,wakeup-type = "low"; - }; -}; - -&tcb0 { - timer0: timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>; - }; - - timer1: timer@1 { - compatible = "atmel,tcb-timer"; - reg = <1>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0_default>; - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3_default>; - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "okay"; -}; - -&usb1 { - num-ports = <3>; - atmel,vbus-gpio = <0 - &pioA PIN_PA10 GPIO_ACTIVE_HIGH - 0 - >; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_default>; - status = "okay"; -}; - -&usb2 { - phy_type = "hsic"; - status = "okay"; -}; - -&watchdog { - status = "okay"; -}; - |