diff options
Diffstat (limited to 'dts/src/arm/at91-sama5d2_ptc_ek.dts')
-rw-r--r-- | dts/src/arm/at91-sama5d2_ptc_ek.dts | 433 |
1 files changed, 0 insertions, 433 deletions
diff --git a/dts/src/arm/at91-sama5d2_ptc_ek.dts b/dts/src/arm/at91-sama5d2_ptc_ek.dts deleted file mode 100644 index 8ed58af013..0000000000 --- a/dts/src/arm/at91-sama5d2_ptc_ek.dts +++ /dev/null @@ -1,433 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR X11) -/* - * at91-sama5d2_ptc_ek.dts - Device Tree file for SAMA5D2 PTC EK board - * - * Copyright (C) 2017 Microchip/Atmel, - * 2017 Wenyou Yang <wenyou.yang@microchip.com> - * 2017 Ludovic Desroches <ludovic.desroches@microchip.com> - */ -/dts-v1/; -#include "sama5d2.dtsi" -#include "sama5d2-pinfunc.h" -#include <dt-bindings/mfd/atmel-flexcom.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/at91.h> - -/ { - model = "Atmel SAMA5D2 PTC EK"; - compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5"; - - aliases { - serial0 = &uart0; /* DBGU */ - i2c0 = &i2c0; /* mikroBUS 1 */ - i2c1 = &i2c1; /* XPRO EXT1 */ - i2c2 = &i2c2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <24000000>; - }; - }; - - ahb { - usb0: gadget@300000 { - atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usba_vbus>; - status = "okay"; - }; - - usb1: ohci@400000 { - num-ports = <3>; - atmel,vbus-gpio = <0 - &pioA PIN_PB12 GPIO_ACTIVE_HIGH - 0 - >; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_default>; - status = "okay"; - }; - - usb2: ehci@500000 { - status = "okay"; - }; - - ebi: ebi@10000000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand_default>; - status = "okay"; /* conflicts with sdmmc1 and qspi0 */ - - nand_controller: nand-controller { - status = "okay"; - - nand@3 { - reg = <0x3 0x0 0x2>; - atmel,rb = <0>; - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - at91bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x40000>; - }; - - bootloader@40000 { - label = "bootloader"; - reg = <0x40000 0xc0000>; - }; - - bootloaderenvred@100000 { - label = "bootloader env redundant"; - reg = <0x100000 0x40000>; - }; - - bootloaderenv@140000 { - label = "bootloader env"; - reg = <0x140000 0x40000>; - }; - - dtb@180000 { - label = "device tree"; - reg = <0x180000 0x80000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; - - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x1f800000>; - }; - }; - }; - }; - }; - - sdmmc0: sdio-host@a0000000 { - bus-width = <8>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sdmmc0_default>; - status = "okay"; - }; - - apb { - spi0: spi@f8000000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi0_default>; - status = "okay"; - }; - - macb0: ethernet@f8008000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>; - phy-mode = "rmii"; - status = "okay"; - - ethernet-phy@1 { - reg = <0x1>; - interrupt-parent = <&pioA>; - interrupts = <56 IRQ_TYPE_LEVEL_LOW>; - }; - }; - - tcb0: timer@f800c000 { - timer0: timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>; - }; - - timer1: timer@1 { - compatible = "atmel,tcb-timer"; - reg = <1>; - }; - }; - - uart0: serial@f801c000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0_default>; - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "okay"; - }; - - uart2: serial@f8024000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_default>; - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "okay"; - }; - - i2c0: i2c@f8028000 { - dmas = <0>, <0>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c0_default>; - pinctrl-1 = <&pinctrl_i2c0_gpio>; - sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - status = "okay"; - }; - - flx0: flexcom@f8034000 { - atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; - status = "okay"; - - i2c2: i2c@600 { - dmas = <0>, <0>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_flx0_default>; - pinctrl-1 = <&pinctrl_flx0_gpio>; - sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - status = "okay"; - }; - }; - - shdwc@f8048010 { - debounce-delay-us = <976>; - - input@0 { - reg = <0>; - }; - }; - - watchdog@f8048040 { - status = "okay"; - }; - - spi1: spi@fc000000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi1_default>; - status = "okay"; - }; - - i2c1: i2c@fc028000 { - dmas = <0>, <0>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c1_default>; - pinctrl-1 = <&pinctrl_i2c1_gpio>; - sda-gpios = <&pioA PIN_PC6 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - status = "okay"; - - at24@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - pagesize = <8>; - }; - }; - - pinctrl@fc038000 { - pinctrl_flx0_default: flx0_default { - pinmux = <PIN_PB28__FLEXCOM0_IO0>, - <PIN_PB29__FLEXCOM0_IO1>; - bias-disable; - }; - - pinctrl_flx0_gpio: flx0_gpio { - pinmux = <PIN_PB28__GPIO>, - <PIN_PB29__GPIO>; - bias-disable; - }; - - pinctrl_i2c0_default: i2c0_default { - pinmux = <PIN_PD21__TWD0>, - <PIN_PD22__TWCK0>; - bias-disable; - }; - - pinctrl_i2c0_gpio: i2c0_gpio { - pinmux = <PIN_PD21__GPIO>, - <PIN_PD22__GPIO>; - bias-disable; - }; - - pinctrl_i2c1_default: i2c1_default { - pinmux = <PIN_PC6__TWD1>, - <PIN_PC7__TWCK1>; - bias-disable; - }; - - pinctrl_i2c1_gpio: i2c1_gpio { - pinmux = <PIN_PC6__GPIO>, - <PIN_PC7__GPIO>; - bias-disable; - }; - - pinctrl_key_gpio_default: key_gpio_default { - pinmux = <PIN_PA10__GPIO>; - bias-pull-up; - }; - - pinctrl_led_gpio_default: led_gpio_default { - pinmux = <PIN_PB6__GPIO>, - <PIN_PB8__GPIO>, - <PIN_PB10__GPIO>; - bias-pull-up; - }; - - pinctrl_macb0_default: macb0_default { - pinmux = <PIN_PB14__GTXCK>, - <PIN_PB15__GTXEN>, - <PIN_PB16__GRXDV>, - <PIN_PB17__GRXER>, - <PIN_PB18__GRX0>, - <PIN_PB19__GRX1>, - <PIN_PB20__GTX0>, - <PIN_PB21__GTX1>, - <PIN_PB22__GMDC>, - <PIN_PB23__GMDIO>; - bias-disable; - }; - - pinctrl_macb0_phy_irq: macb0_phy_irq { - pinmux = <PIN_PB24__GPIO>; - bias-disable; - }; - - pinctrl_nand_default: nand_default { - re_we_data { - pinmux = <PIN_PA22__D0>, - <PIN_PA23__D1>, - <PIN_PA24__D2>, - <PIN_PA25__D3>, - <PIN_PA26__D4>, - <PIN_PA27__D5>, - <PIN_PA28__D6>, - <PIN_PA29__D7>, - <PIN_PA30__NWE_NANDWE>, - <PIN_PB2__NRD_NANDOE>; - bias-pull-up; - atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>; - }; - - ale_cle_rdy_cs { - pinmux = <PIN_PB0__A21_NANDALE>, - <PIN_PB1__A22_NANDCLE>, - <PIN_PC8__NANDRDY>, - <PIN_PA31__NCS3>; - bias-pull-up; - }; - }; - - pinctrl_sdmmc0_default: sdmmc0_default { - cmd_data { - pinmux = <PIN_PA1__SDMMC0_CMD>, - <PIN_PA2__SDMMC0_DAT0>, - <PIN_PA3__SDMMC0_DAT1>, - <PIN_PA4__SDMMC0_DAT2>, - <PIN_PA5__SDMMC0_DAT3>, - <PIN_PA6__SDMMC0_DAT4>, - <PIN_PA7__SDMMC0_DAT5>, - <PIN_PA8__SDMMC0_DAT6>, - <PIN_PA9__SDMMC0_DAT7>; - bias-pull-up; - }; - - ck_cd_vddsel { - pinmux = <PIN_PA0__SDMMC0_CK>, - <PIN_PA11__SDMMC0_VDDSEL>, - <PIN_PA13__SDMMC0_CD>; - bias-disable; - }; - }; - - pinctrl_spi0_default: spi0_default { - pinmux = <PIN_PA14__SPI0_SPCK>, - <PIN_PA15__SPI0_MOSI>, - <PIN_PA16__SPI0_MISO>, - <PIN_PA17__SPI0_NPCS0>; - bias-disable; - }; - - pinctrl_spi1_default: spi1_default { - pinmux = <PIN_PC1__SPI1_SPCK>, - <PIN_PC2__SPI1_MOSI>, - <PIN_PC3__SPI1_MISO>, - <PIN_PC4__SPI1_NPCS0>; - bias-disable; - }; - - pinctrl_uart0_default: uart0_default { - pinmux = <PIN_PB26__URXD0>, - <PIN_PB27__UTXD0>; - bias-disable; - }; - - pinctrl_uart2_default: uart2_default { - pinmux = <PIN_PD23__URXD2>, - <PIN_PD24__UTXD2>; - bias-disable; - }; - - pinctrl_usb_default: usb_default { - pinmux = <PIN_PB12__GPIO>; - bias-disable; - }; - - pinctrl_usba_vbus: usba_vbus { - pinmux = <PIN_PB11__GPIO>; - bias-disable; - }; - - }; - - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_key_gpio_default>; - - bp1 { - label = "PB_USER"; - gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>; - linux,code = <KEY_PROG1>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_led_gpio_default>; - status = "okay"; - - red { - label = "red"; - gpios = <&pioA PIN_PB10 GPIO_ACTIVE_HIGH>; - }; - - green { - label = "green"; - gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>; - }; - - blue { - label = "blue"; - gpios = <&pioA PIN_PB6 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; -}; |