summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/at91-sama5d2_xplained.dts
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm/at91-sama5d2_xplained.dts')
-rw-r--r--dts/src/arm/at91-sama5d2_xplained.dts674
1 files changed, 0 insertions, 674 deletions
diff --git a/dts/src/arm/at91-sama5d2_xplained.dts b/dts/src/arm/at91-sama5d2_xplained.dts
deleted file mode 100644
index 055ee53e47..0000000000
--- a/dts/src/arm/at91-sama5d2_xplained.dts
+++ /dev/null
@@ -1,674 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board
- *
- * Copyright (C) 2015 Atmel,
- * 2015 Nicolas Ferre <nicolas.ferre@atmel.com>
- */
-/dts-v1/;
-#include "sama5d2.dtsi"
-#include "sama5d2-pinfunc.h"
-#include <dt-bindings/mfd/atmel-flexcom.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
-
-/ {
- model = "Atmel SAMA5D2 Xplained";
- compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- clocks {
- slow_xtal {
- clock-frequency = <32768>;
- };
-
- main_xtal {
- clock-frequency = <12000000>;
- };
- };
-
- ahb {
- usb0: gadget@300000 {
- atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usba_vbus>;
- status = "okay";
- };
-
- usb1: ohci@400000 {
- num-ports = <3>;
- atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
- &pioA PIN_PB10 GPIO_ACTIVE_HIGH
- 0
- >;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb_default>;
- status = "okay";
- };
-
- usb2: ehci@500000 {
- status = "okay";
- };
-
- sdmmc0: sdio-host@a0000000 {
- bus-width = <8>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sdmmc0_default>;
- non-removable;
- mmc-ddr-1_8v;
- status = "okay";
- };
-
- sdmmc1: sdio-host@b0000000 {
- bus-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sdmmc1_default>;
- status = "okay"; /* conflict with qspi0 */
- vqmmc-supply = <&vdd_3v3_reg>;
- vmmc-supply = <&vdd_3v3_reg>;
- };
-
- apb {
- spi0: spi@f8000000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_spi0_default>;
- status = "okay";
-
- m25p80@0 {
- compatible = "atmel,at25df321a";
- reg = <0>;
- spi-max-frequency = <50000000>;
- };
- };
-
- macb0: ethernet@f8008000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
- phy-mode = "rmii";
- status = "okay";
-
- ethernet-phy@1 {
- reg = <0x1>;
- interrupt-parent = <&pioA>;
- interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
- };
- };
-
- tcb0: timer@f800c000 {
- timer0: timer@0 {
- compatible = "atmel,tcb-timer";
- reg = <0>;
- };
-
- timer1: timer@1 {
- compatible = "atmel,tcb-timer";
- reg = <1>;
- };
- };
-
- pdmic@f8018000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pdmic_default>;
- atmel,model = "PDMIC @ sama5d2_xplained";
- atmel,mic-min-freq = <1000000>;
- atmel,mic-max-freq = <3246000>;
- atmel,mic-offset = <0x0>;
- status = "okay";
- };
-
- uart1: serial@f8020000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_default>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- status = "okay";
- };
-
- i2c0: i2c@f8028000 {
- dmas = <0>, <0>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c0_default>;
- pinctrl-1 = <&pinctrl_i2c0_gpio>;
- sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
- scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>;
- i2c-sda-hold-time-ns = <350>;
- status = "okay";
-
- pmic@5b {
- compatible = "active-semi,act8945a";
- reg = <0x5b>;
- active-semi,vsel-high;
- status = "okay";
-
- regulators {
- vdd_1v35_reg: REG_DCDC1 {
- regulator-name = "VDD_1V35";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
- <ACT8945A_REGULATOR_MODE_LOWPOWER>;
- regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
- regulator-always-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-min-microvolt=<1400000>;
- regulator-suspend-max-microvolt=<1400000>;
- regulator-changeable-in-suspend;
- regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>;
- };
- };
-
- vdd_1v2_reg: REG_DCDC2 {
- regulator-name = "VDD_1V2";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1300000>;
- regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
- <ACT8945A_REGULATOR_MODE_LOWPOWER>;
- regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
- regulator-always-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_3v3_reg: REG_DCDC3 {
- regulator-name = "VDD_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
- <ACT8945A_REGULATOR_MODE_LOWPOWER>;
- regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
- regulator-always-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_fuse_reg: REG_LDO1 {
- regulator-name = "VDD_FUSE";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
- <ACT8945A_REGULATOR_MODE_LOWPOWER>;
- regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
- regulator-always-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_3v3_lp_reg: REG_LDO2 {
- regulator-name = "VDD_3V3_LP";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
- <ACT8945A_REGULATOR_MODE_LOWPOWER>;
- regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
- regulator-always-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_led_reg: REG_LDO3 {
- regulator-name = "VDD_LED";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
- <ACT8945A_REGULATOR_MODE_LOWPOWER>;
- regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
- regulator-always-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_sdhc_1v8_reg: REG_LDO4 {
- regulator-name = "VDD_SDHC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
- <ACT8945A_REGULATOR_MODE_LOWPOWER>;
- regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
- regulator-always-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
-
- charger {
- compatible = "active-semi,act8945a-charger";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
- interrupt-parent = <&pioA>;
- interrupts = <PIN_PB13 IRQ_TYPE_EDGE_RISING>;
-
- active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
- active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
- active-semi,input-voltage-threshold-microvolt = <6600>;
- active-semi,precondition-timeout = <40>;
- active-semi,total-timeout = <3>;
- status = "okay";
- };
- };
- };
-
- pwm0: pwm@f802c000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
- status = "disabled"; /* conflict with leds */
- };
-
- flx0: flexcom@f8034000 {
- atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
- status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
-
- uart5: serial@200 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0x200 0x200>;
- interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
- clock-names = "usart";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flx0_default>;
- atmel,fifo-size = <32>;
- status = "okay";
- };
- };
-
- shdwc@f8048010 {
- atmel,shdwc-debouncer = <976>;
- atmel,wakeup-rtc-timer;
-
- input@0 {
- reg = <0>;
- atmel,wakeup-type = "low";
- };
- };
-
- watchdog@f8048040 {
- status = "okay";
- };
-
- i2s0: i2s@f8050000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2s0_default>;
- status = "disabled"; /* conflict with can0 */
- };
-
- can0: can@f8054000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can0_default>;
- status = "okay";
- };
-
- uart3: serial@fc008000 {
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_default>;
- status = "okay";
- };
-
- flx4: flexcom@fc018000 {
- atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
- status = "okay";
-
- i2c2: i2c@600 {
- compatible = "atmel,sama5d2-i2c";
- reg = <0x600 0x200>;
- interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
- dmas = <0>, <0>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_flx4_default>;
- pinctrl-1 = <&pinctrl_flx4_gpio>;
- sda-gpios = <&pioA PIN_PD12 GPIO_ACTIVE_HIGH>;
- scl-gpios = <&pioA PIN_PD13 GPIO_ACTIVE_HIGH>;
- atmel,fifo-size = <16>;
- i2c-analog-filter;
- i2c-digital-filter;
- i2c-digital-filter-width-ns = <35>;
- status = "okay";
- };
- };
-
- i2c1: i2c@fc028000 {
- dmas = <0>, <0>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c1_default>;
- i2c-analog-filter;
- i2c-digital-filter;
- i2c-digital-filter-width-ns = <35>;
- pinctrl-1 = <&pinctrl_i2c1_gpio>;
- sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
- scl-gpios = <&pioA PIN_PD5 GPIO_ACTIVE_HIGH>;
- status = "okay";
-
- at24@54 {
- compatible = "atmel,24c02";
- reg = <0x54>;
- pagesize = <16>;
- };
- };
-
- adc: adc@fc030000 {
- vddana-supply = <&vdd_3v3_lp_reg>;
- vref-supply = <&vdd_3v3_lp_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
- status = "okay";
- };
-
- pinctrl@fc038000 {
- /*
- * There is no real pinmux for ADC, if the pin
- * is not requested by another peripheral then
- * the muxing is done when channel is enabled.
- * Requesting pins for ADC is GPIO is
- * encouraged to prevent conflicts and to
- * disable bias in order to be in the same
- * state when the pin is not muxed to the adc.
- */
- pinctrl_adc_default: adc_default {
- pinmux = <PIN_PD23__GPIO>;
- bias-disable;
- };
-
- pinctrl_can0_default: can0_default {
- pinmux = <PIN_PC10__CANTX0>,
- <PIN_PC11__CANRX0>;
- bias-disable;
- };
-
- pinctrl_can1_default: can1_default {
- pinmux = <PIN_PC26__CANTX1>,
- <PIN_PC27__CANRX1>;
- bias-disable;
- };
-
- /*
- * The ADTRG pin can work on any edge type.
- * In here it's being pulled up, so need to
- * connect it to ground to get an edge e.g.
- * Trigger can be configured on falling, rise
- * or any edge, and the pull-up can be changed
- * to pull-down or left floating according to
- * needs.
- */
- pinctrl_adtrg_default: adtrg_default {
- pinmux = <PIN_PD31__ADTRG>;
- bias-pull-up;
- };
-
- pinctrl_charger_chglev: charger_chglev {
- pinmux = <PIN_PA12__GPIO>;
- bias-disable;
- };
-
- pinctrl_charger_irq: charger_irq {
- pinmux = <PIN_PB13__GPIO>;
- bias-disable;
- };
-
- pinctrl_charger_lbo: charger_lbo {
- pinmux = <PIN_PC8__GPIO>;
- bias-pull-up;
- };
-
- pinctrl_classd_default: classd_default {
- pinmux = <PIN_PB1__CLASSD_R0>,
- <PIN_PB2__CLASSD_R1>,
- <PIN_PB3__CLASSD_R2>,
- <PIN_PB4__CLASSD_R3>;
- bias-pull-up;
- };
-
- pinctrl_flx0_default: flx0_default {
- pinmux = <PIN_PB28__FLEXCOM0_IO0>,
- <PIN_PB29__FLEXCOM0_IO1>;
- bias-disable;
- };
-
- pinctrl_flx4_default: flx4_default {
- pinmux = <PIN_PD12__FLEXCOM4_IO0>,
- <PIN_PD13__FLEXCOM4_IO1>;
- bias-disable;
- };
-
- pinctrl_flx4_gpio: flx4_gpio {
- pinmux = <PIN_PD12__GPIO>,
- <PIN_PD13__GPIO>;
- bias-disable;
- };
-
- pinctrl_i2c0_default: i2c0_default {
- pinmux = <PIN_PD21__TWD0>,
- <PIN_PD22__TWCK0>;
- bias-disable;
- };
-
- pinctrl_i2c0_gpio: i2c0_gpio {
- pinmux = <PIN_PD21__GPIO>,
- <PIN_PD22__GPIO>;
- bias-disable;
- };
-
- pinctrl_i2c1_default: i2c1_default {
- pinmux = <PIN_PD4__TWD1>,
- <PIN_PD5__TWCK1>;
- bias-disable;
- };
-
- pinctrl_i2c1_gpio: i2c1_gpio {
- pinmux = <PIN_PD4__GPIO>,
- <PIN_PD5__GPIO>;
- bias-disable;
- };
-
- pinctrl_i2s0_default: i2s0_default {
- pinmux = <PIN_PC1__I2SC0_CK>,
- <PIN_PC2__I2SC0_MCK>,
- <PIN_PC3__I2SC0_WS>,
- <PIN_PC4__I2SC0_DI0>,
- <PIN_PC5__I2SC0_DO0>;
- bias-disable;
- };
-
- pinctrl_i2s1_default: i2s1_default {
- pinmux = <PIN_PA15__I2SC1_CK>,
- <PIN_PA14__I2SC1_MCK>,
- <PIN_PA16__I2SC1_WS>,
- <PIN_PA17__I2SC1_DI0>,
- <PIN_PA18__I2SC1_DO0>;
- bias-disable;
- };
-
- pinctrl_key_gpio_default: key_gpio_default {
- pinmux = <PIN_PB9__GPIO>;
- bias-pull-up;
- };
-
- pinctrl_led_gpio_default: led_gpio_default {
- pinmux = <PIN_PB0__GPIO>,
- <PIN_PB5__GPIO>,
- <PIN_PB6__GPIO>;
- bias-pull-up;
- };
-
- pinctrl_macb0_default: macb0_default {
- pinmux = <PIN_PB14__GTXCK>,
- <PIN_PB15__GTXEN>,
- <PIN_PB16__GRXDV>,
- <PIN_PB17__GRXER>,
- <PIN_PB18__GRX0>,
- <PIN_PB19__GRX1>,
- <PIN_PB20__GTX0>,
- <PIN_PB21__GTX1>,
- <PIN_PB22__GMDC>,
- <PIN_PB23__GMDIO>;
- bias-disable;
- };
-
- pinctrl_macb0_phy_irq: macb0_phy_irq {
- pinmux = <PIN_PC9__GPIO>;
- bias-disable;
- };
-
- pinctrl_pdmic_default: pdmic_default {
- pinmux = <PIN_PB26__PDMIC_DAT>,
- <PIN_PB27__PDMIC_CLK>;
- bias-disable;
- };
-
- pinctrl_sdmmc0_default: sdmmc0_default {
- cmd_data {
- pinmux = <PIN_PA1__SDMMC0_CMD>,
- <PIN_PA2__SDMMC0_DAT0>,
- <PIN_PA3__SDMMC0_DAT1>,
- <PIN_PA4__SDMMC0_DAT2>,
- <PIN_PA5__SDMMC0_DAT3>,
- <PIN_PA6__SDMMC0_DAT4>,
- <PIN_PA7__SDMMC0_DAT5>,
- <PIN_PA8__SDMMC0_DAT6>,
- <PIN_PA9__SDMMC0_DAT7>;
- bias-disable;
- };
-
- ck_cd_rstn_vddsel {
- pinmux = <PIN_PA0__SDMMC0_CK>,
- <PIN_PA10__SDMMC0_RSTN>,
- <PIN_PA11__SDMMC0_VDDSEL>,
- <PIN_PA13__SDMMC0_CD>;
- bias-disable;
- };
- };
-
- pinctrl_sdmmc1_default: sdmmc1_default {
- cmd_data {
- pinmux = <PIN_PA28__SDMMC1_CMD>,
- <PIN_PA18__SDMMC1_DAT0>,
- <PIN_PA19__SDMMC1_DAT1>,
- <PIN_PA20__SDMMC1_DAT2>,
- <PIN_PA21__SDMMC1_DAT3>;
- bias-disable;
- };
-
- conf-ck_cd {
- pinmux = <PIN_PA22__SDMMC1_CK>,
- <PIN_PA30__SDMMC1_CD>;
- bias-disable;
- };
- };
-
- pinctrl_spi0_default: spi0_default {
- pinmux = <PIN_PA14__SPI0_SPCK>,
- <PIN_PA15__SPI0_MOSI>,
- <PIN_PA16__SPI0_MISO>,
- <PIN_PA17__SPI0_NPCS0>;
- bias-disable;
- };
-
- pinctrl_uart1_default: uart1_default {
- pinmux = <PIN_PD2__URXD1>,
- <PIN_PD3__UTXD1>;
- bias-disable;
- };
-
- pinctrl_uart3_default: uart3_default {
- pinmux = <PIN_PB11__URXD3>,
- <PIN_PB12__UTXD3>;
- bias-disable;
- };
-
- pinctrl_usb_default: usb_default {
- pinmux = <PIN_PB10__GPIO>;
- bias-disable;
- };
-
- pinctrl_usba_vbus: usba_vbus {
- pinmux = <PIN_PA31__GPIO>;
- bias-disable;
- };
-
- pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
- pinmux = <PIN_PB5__PWMH2>,
- <PIN_PB6__PWML2>;
- bias-pull-up;
- };
- };
-
- classd: classd@fc048000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_classd_default>;
- atmel,pwm-type = "diff";
- atmel,non-overlap-time = <10>;
- status = "okay";
- };
-
- i2s1: i2s@fc04c000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2s1_default>;
- status = "disabled"; /* conflict with spi0, sdmmc1 */
- };
-
- can1: can@fc050000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can1_default>;
- status = "okay";
- };
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
-
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_key_gpio_default>;
-
- bp1 {
- label = "PB_USER";
- gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
- linux,code = <0x104>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_led_gpio_default>;
- status = "okay"; /* conflict with pwm0 */
-
- red {
- label = "red";
- gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
- };
-
-
- green {
- label = "green";
- gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
- };
-
- blue {
- label = "blue";
- gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
- };
- };
-};