diff options
Diffstat (limited to 'dts/src/arm/at91-sama5d2_xplained.dts')
| -rw-r--r-- | dts/src/arm/at91-sama5d2_xplained.dts | 92 |
1 files changed, 92 insertions, 0 deletions
diff --git a/dts/src/arm/at91-sama5d2_xplained.dts b/dts/src/arm/at91-sama5d2_xplained.dts index e683856c50..21c780fab7 100644 --- a/dts/src/arm/at91-sama5d2_xplained.dts +++ b/dts/src/arm/at91-sama5d2_xplained.dts @@ -46,6 +46,7 @@ #include "sama5d2.dtsi" #include "sama5d2-pinfunc.h" #include <dt-bindings/mfd/atmel-flexcom.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel SAMA5D2 Xplained"; @@ -71,11 +72,20 @@ ahb { usb0: gadget@00300000 { + atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; usb1: ohci@00400000 { num-ports = <3>; + atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */ + &pioA 42 GPIO_ACTIVE_HIGH + 0 + >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; status = "okay"; }; @@ -267,7 +277,29 @@ }; }; + adc: adc@fc030000 { + vddana-supply = <&vdd_3v3_lp_reg>; + vref-supply = <&vdd_3v3_lp_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc_default>; + status = "okay"; + }; + pinctrl@fc038000 { + /* + * There is no real pinmux for ADC, if the pin + * is not requested by another peripheral then + * the muxing is done when channel is enabled. + * Requesting pins for ADC is GPIO is + * encouraged to prevent conflicts and to + * disable bias in order to be in the same + * state when the pin is not muxed to the adc. + */ + pinctrl_adc_default: adc_default { + pinmux = <PIN_PD23__GPIO>; + bias-disable; + }; + pinctrl_flx0_default: flx0_default { pinmux = <PIN_PB28__FLEXCOM0_IO0>, <PIN_PB29__FLEXCOM0_IO1>; @@ -292,6 +324,18 @@ bias-disable; }; + pinctrl_key_gpio_default: key_gpio_default { + pinmux = <PIN_PB9__GPIO>; + bias-pull-up; + }; + + pinctrl_led_gpio_default: led_gpio_default { + pinmux = <PIN_PB0__GPIO>, + <PIN_PB5__GPIO>, + <PIN_PB6__GPIO>; + bias-pull-up; + }; + pinctrl_macb0_default: macb0_default { pinmux = <PIN_PB14__GTXCK>, <PIN_PB15__GTXEN>, @@ -308,6 +352,7 @@ pinctrl_macb0_phy_irq: macb0_phy_irq { pinmux = <PIN_PC9__GPIO>; + bias-disable; }; pinctrl_pdmic_default: pdmic_default { @@ -375,7 +420,54 @@ <PIN_PB12__UTXD3>; bias-disable; }; + + pinctrl_usb_default: usb_default { + pinmux = <PIN_PB10__GPIO>; + bias-disable; + }; + + pinctrl_usba_vbus: usba_vbus { + pinmux = <PIN_PA31__GPIO>; + bias-disable; + }; + }; }; }; + + gpio_keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio_default>; + + bp1 { + label = "PB_USER"; + gpios = <&pioA 41 GPIO_ACTIVE_LOW>; + linux,code = <0x104>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_gpio_default>; + status = "okay"; + + red { + label = "red"; + gpios = <&pioA 38 GPIO_ACTIVE_LOW>; + }; + + green { + label = "green"; + gpios = <&pioA 37 GPIO_ACTIVE_LOW>; + }; + + blue { + label = "blue"; + gpios = <&pioA 32 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; }; |