diff options
Diffstat (limited to 'dts/src/arm/at91-sama5d2_xplained.dts')
| -rw-r--r-- | dts/src/arm/at91-sama5d2_xplained.dts | 118 |
1 files changed, 100 insertions, 18 deletions
diff --git a/dts/src/arm/at91-sama5d2_xplained.dts b/dts/src/arm/at91-sama5d2_xplained.dts index 055ee53e47..a927165ea7 100644 --- a/dts/src/arm/at91-sama5d2_xplained.dts +++ b/dts/src/arm/at91-sama5d2_xplained.dts @@ -16,6 +16,13 @@ model = "Atmel SAMA5D2 Xplained"; compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5"; + aliases { + serial0 = &uart1; /* DBGU */ + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; /* XPRO EXT2 */ + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -72,6 +79,58 @@ }; apb { + qspi0: spi@f0020000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi0_default>; + status = "disabled"; /* conflict with sdmmc1 */ + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + + at91bootstrap@00000000 { + label = "at91bootstrap"; + reg = <0x00000000 0x00040000>; + }; + + bootloader@00040000 { + label = "bootloader"; + reg = <0x00040000 0x000c0000>; + }; + + bootloaderenvred@00100000 { + label = "bootloader env redundant"; + reg = <0x00100000 0x00040000>; + }; + + bootloaderenv@00140000 { + label = "bootloader env"; + reg = <0x00140000 0x00040000>; + }; + + dtb@00180000 { + label = "device tree"; + reg = <0x00180000 0x00080000>; + }; + + kernel@00200000 { + label = "kernel"; + reg = <0x00200000 0x00600000>; + }; + + misc@00800000 { + label = "misc"; + reg = <0x00800000 0x00000000>; + }; + }; + }; + spi0: spi@f8000000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0_default>; @@ -133,7 +192,7 @@ pinctrl-0 = <&pinctrl_i2c0_default>; pinctrl-1 = <&pinctrl_i2c0_gpio>; sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-sda-hold-time-ns = <350>; status = "okay"; @@ -275,16 +334,25 @@ status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */ uart5: serial@200 { - compatible = "atmel,at91sam9260-usart"; - reg = <0x200 0x200>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; - clock-names = "usart"; + dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx0_default>; - atmel,fifo-size = <32>; status = "okay"; }; + + i2c2: i2c@600 { + dmas = <0>, <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_flx0_default>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-sda-hold-time-ns = <350>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */ + }; }; shdwc@f8048010 { @@ -325,21 +393,13 @@ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; status = "okay"; - i2c2: i2c@600 { - compatible = "atmel,sama5d2-i2c"; - reg = <0x600 0x200>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + i2c6: i2c@600 { dmas = <0>, <0>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_flx4_default>; pinctrl-1 = <&pinctrl_flx4_gpio>; sda-gpios = <&pioA PIN_PD12 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PD13 GPIO_ACTIVE_HIGH>; - atmel,fifo-size = <16>; + scl-gpios = <&pioA PIN_PD13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-analog-filter; i2c-digital-filter; i2c-digital-filter-width-ns = <35>; @@ -356,7 +416,7 @@ i2c-digital-filter-width-ns = <35>; pinctrl-1 = <&pinctrl_i2c1_gpio>; sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PD5 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; at24@54 { @@ -480,6 +540,12 @@ bias-disable; }; + pinctrl_i2c2_gpio: i2c2_gpio { + pinmux = <PIN_PB28__GPIO>, + <PIN_PB29__GPIO>; + bias-disable; + }; + pinctrl_i2s0_default: i2s0_default { pinmux = <PIN_PC1__I2SC0_CK>, <PIN_PC2__I2SC0_MCK>, @@ -535,6 +601,22 @@ bias-disable; }; + pinctrl_qspi0_default: qspi0_default { + sck_cs { + pinmux = <PIN_PA22__QSPI0_SCK>, + <PIN_PA23__QSPI0_CS>; + bias-disable; + }; + + data { + pinmux = <PIN_PA24__QSPI0_IO0>, + <PIN_PA25__QSPI0_IO1>, + <PIN_PA26__QSPI0_IO2>, + <PIN_PA27__QSPI0_IO3>; + bias-pull-up; + }; + }; + pinctrl_sdmmc0_default: sdmmc0_default { cmd_data { pinmux = <PIN_PA1__SDMMC0_CMD>, |