diff options
Diffstat (limited to 'dts/src/arm/at91-sama5d3_ksz9477_evb.dts')
| -rw-r--r-- | dts/src/arm/at91-sama5d3_ksz9477_evb.dts | 209 |
1 files changed, 0 insertions, 209 deletions
diff --git a/dts/src/arm/at91-sama5d3_ksz9477_evb.dts b/dts/src/arm/at91-sama5d3_ksz9477_evb.dts deleted file mode 100644 index 443e8b0228..0000000000 --- a/dts/src/arm/at91-sama5d3_ksz9477_evb.dts +++ /dev/null @@ -1,209 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* - * Copyright (c) 2021 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix - */ -/dts-v1/; -#include "sama5d36.dtsi" - -/ { - model = "EVB-KSZ9477"; - compatible = "microchip,sama5d3-ksz9477-evb", "atmel,sama5d36", - "atmel,sama5d3", "atmel,sama5"; - - chosen { - stdout-path = &dbgu; - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_vcc_mmc0: regulator-mmc0 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mcc0_vcc>; - regulator-name = "mmc0-vcc"; - regulator-max-microvolt = <3300000>; - regulator-min-microvolt = <3300000>; - gpio = <&pioE 2 GPIO_ACTIVE_LOW>; - }; -}; - -&dbgu { - status = "okay"; -}; - -&ebi { - pinctrl-0 = <&pinctrl_ebi_nand_addr>; - pinctrl-names = "default"; - status = "okay"; -}; - -&i2c0 { - pinctrl-0 = <&pinctrl_i2c0_pu>; - status = "okay"; -}; - -&macb0 { - phy-mode = "rgmii"; - status = "okay"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&main_xtal { - clock-frequency = <12000000>; -}; - -&mmc0 { - pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 - &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>; - status = "okay"; - - slot@0 { - reg = <0>; - bus-width = <8>; - cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>; - disable-wp; - vmmc-supply = <®_vcc_mmc0>; - vqmmc-supply = <®_3v3>; - }; -}; - -&nand_controller { - status = "okay"; - - nand@3 { - reg = <0x3 0x0 0x2>; - atmel,rb = <0>; - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - nand-on-flash-bbt; - label = "atmel_nand"; - }; -}; - -&slow_xtal { - clock-frequency = <32768>; -}; - -&spi0 { - cs-gpios = <&pioD 13 GPIO_ACTIVE_LOW>, <0>, <0>, - <&pioD 16 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&spi1 { - pinctrl-0 = <&pinctrl_spi_ksz>; - cs-gpios = <&pioC 25 GPIO_ACTIVE_LOW>; - status = "okay"; - - switch@0 { - compatible = "microchip,ksz9477"; - reg = <0>; - spi-max-frequency = <1000000>; - spi-cpha; - spi-cpol; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan1"; - }; - - port@1 { - reg = <1>; - label = "lan2"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - }; - - port@3 { - reg = <3>; - label = "lan4"; - }; - - port@4 { - reg = <4>; - label = "lan5"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - ethernet = <&macb0>; - phy-mode = "rgmii-txid"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; -}; - -&usb0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usba_vbus>; - atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&pinctrl { - board { - pinctrl_i2c0_pu: i2c0-pu { - atmel,pins = - <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, - <AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; - }; - - pinctrl_mmc0_cd: mmc0-cd { - atmel,pins = <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; - }; - - pinctrl_mcc0_vcc: mmc0-vcc { - atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; - }; - - pinctrl_spi_ksz: spi-ksz { - atmel,pins = - < - /* SPI1_MISO */ - AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP - /* SPI1_MOSI */ - AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE - /* SPI1_SPCK */ - AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE - - /* SPI CS */ - AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE - /* switch IRQ */ - AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH - /* switch PME_N, SoC IN */ - AT91_PIOC 30 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP - /* switch RST */ - AT91_PIOC 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH - >; - }; - - pinctrl_usba_vbus: usba-vbus { - atmel,pins = - <AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; - }; - }; -}; |