diff options
Diffstat (limited to 'dts/src/arm/at91-sama5d3_xplained.dts')
-rw-r--r-- | dts/src/arm/at91-sama5d3_xplained.dts | 406 |
1 files changed, 0 insertions, 406 deletions
diff --git a/dts/src/arm/at91-sama5d3_xplained.dts b/dts/src/arm/at91-sama5d3_xplained.dts deleted file mode 100644 index a49c2966b4..0000000000 --- a/dts/src/arm/at91-sama5d3_xplained.dts +++ /dev/null @@ -1,406 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board - * - * Copyright (C) 2014 Atmel, - * 2014 Nicolas Ferre <nicolas.ferre@atmel.com> - */ -/dts-v1/; -#include "sama5d36.dtsi" -#include <dt-bindings/input/input.h> - -/ { - model = "SAMA5D3 Xplained"; - compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@20000000 { - reg = <0x20000000 0x10000000>; - }; - - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <12000000>; - }; - }; - - ahb { - apb { - mmc0: mmc@f0000000 { - pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>; - vmmc-supply = <&vcc_mmc0_reg>; - vqmmc-supply = <&vcc_3v3_reg>; - status = "okay"; - slot@0 { - reg = <0>; - bus-width = <8>; - cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>; - }; - }; - - mmc1: mmc@f8000000 { - vmmc-supply = <&vcc_3v3_reg>; - vqmmc-supply = <&vcc_3v3_reg>; - status = "disabled"; - slot@0 { - reg = <0>; - bus-width = <4>; - cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>; - }; - }; - - spi0: spi@f0004000 { - pinctrl-names = "default", "cs"; - pinctrl-1 = <&pinctrl_spi0_cs>; - cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>; - status = "okay"; - }; - - can0: can@f000c000 { - status = "okay"; - }; - - tcb0: timer@f0010000 { - timer0: timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>; - }; - - timer1: timer@1 { - compatible = "atmel,tcb-timer"; - reg = <1>; - }; - }; - - i2c0: i2c@f0014000 { - pinctrl-0 = <&pinctrl_i2c0_pu>; - status = "okay"; - }; - - i2c1: i2c@f0018000 { - status = "okay"; - - pmic: act8865@5b { - compatible = "active-semi,act8865"; - reg = <0x5b>; - status = "disabled"; - - regulators { - vcc_1v8_reg: DCDC_REG1 { - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcc_1v2_reg: DCDC_REG2 { - regulator-name = "VCC_1V2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vcc_3v3_reg: DCDC_REG3 { - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vddfuse_reg: LDO_REG1 { - regulator-name = "FUSE_2V5"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - - vddana_reg: LDO_REG2 { - regulator-name = "VDDANA"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - }; - }; - - macb0: ethernet@f0028000 { - phy-mode = "rgmii-rxid"; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - ethernet-phy@7 { - reg = <0x7>; - }; - }; - - pwm0: pwm@f002c000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>; - status = "okay"; - }; - - usart0: serial@f001c000 { - status = "okay"; - }; - - usart1: serial@f0020000 { - pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; - status = "okay"; - }; - - uart0: serial@f0024000 { - status = "okay"; - }; - - mmc1: mmc@f8000000 { - pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; - status = "okay"; - slot@0 { - reg = <0>; - bus-width = <4>; - cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>; - }; - }; - - spi1: spi@f8008000 { - pinctrl-names = "default", "cs"; - pinctrl-1 = <&pinctrl_spi1_cs>; - cs-gpios = <&pioC 25 0>; - status = "okay"; - }; - - adc0: adc@f8018000 { - atmel,adc-vref = <3300>; - atmel,adc-channels-used = <0xfe>; - pinctrl-0 = < - &pinctrl_adc0_adtrg - &pinctrl_adc0_ad1 - &pinctrl_adc0_ad2 - &pinctrl_adc0_ad3 - &pinctrl_adc0_ad4 - &pinctrl_adc0_ad5 - &pinctrl_adc0_ad6 - &pinctrl_adc0_ad7 - >; - status = "okay"; - }; - - i2c2: i2c@f801c000 { - dmas = <0>, <0>; /* Do not use DMA for i2c2 */ - pinctrl-0 = <&pinctrl_i2c2_pu>; - status = "okay"; - }; - - macb1: ethernet@f802c000 { - phy-mode = "rmii"; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - ethernet-phy@1 { - reg = <0x1>; - }; - }; - - dbgu: serial@ffffee00 { - status = "okay"; - }; - - pinctrl@fffff200 { - board { - pinctrl_i2c0_pu: i2c0_pu { - atmel,pins = - <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, - <AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; - }; - - pinctrl_i2c2_pu: i2c2_pu { - atmel,pins = - <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>, - <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; - }; - - pinctrl_key_gpio: key_gpio_0 { - atmel,pins = - <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; - }; - - pinctrl_mmc0_cd: mmc0_cd { - atmel,pins = - <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; - }; - - pinctrl_mmc1_cd: mmc1_cd { - atmel,pins = - <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; - }; - - pinctrl_usba_vbus: usba_vbus { - atmel,pins = - <AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */ - }; - pinctrl_usb_default: usb_default { - atmel,pins = - <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE - AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; - }; - - pinctrl_gpio_leds: gpio_leds_default { - atmel,pins = - <AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE - AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; - }; - - pinctrl_spi0_cs: spi0_cs_default { - atmel,pins = - <AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE - AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; - }; - - pinctrl_spi1_cs: spi1_cs_default { - atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; - }; - - pinctrl_vcc_mmc0_reg_gpio: vcc_mmc0_reg_gpio_default { - atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; - }; - }; - }; - }; - - usb0: gadget@500000 { - atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usba_vbus>; - status = "okay"; - }; - - usb1: ohci@600000 { - num-ports = <3>; - atmel,vbus-gpio = <0 - &pioE 3 GPIO_ACTIVE_LOW - &pioE 4 GPIO_ACTIVE_LOW - >; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_default>; - status = "okay"; - }; - - usb2: ehci@700000 { - status = "okay"; - }; - - ebi: ebi@10000000 { - pinctrl-0 = <&pinctrl_ebi_nand_addr>; - pinctrl-names = "default"; - status = "okay"; - - nand_controller: nand-controller { - status = "okay"; - - nand@3 { - reg = <0x3 0x0 0x2>; - atmel,rb = <0>; - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; - - bootloader@40000 { - label = "bootloader"; - reg = <0x40000 0xc0000>; - }; - - bootloaderenvred@100000 { - label = "bootloader env redundant"; - reg = <0x100000 0x40000>; - }; - - bootloaderenv@140000 { - label = "bootloader env"; - reg = <0x140000 0x40000>; - }; - - dtb@180000 { - label = "device tree"; - reg = <0x180000 0x80000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; - - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; - }; - }; - }; - }; - }; - }; - - vcc_mmc0_reg: fixedregulator_mmc0 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>; - gpio = <&pioE 2 GPIO_ACTIVE_LOW>; - regulator-name = "mmc0-card-supply"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - gpio_keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_key_gpio>; - - bp3 { - label = "PB_USER"; - gpios = <&pioE 29 GPIO_ACTIVE_LOW>; - linux,code = <KEY_PROG1>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_leds>; - status = "okay"; - - d2 { - label = "d2"; - gpios = <&pioE 23 GPIO_ACTIVE_LOW>; /* PE23, conflicts with A23, CTS2 */ - linux,default-trigger = "heartbeat"; - }; - - d3 { - label = "d3"; /* Conflict with EBI CS0, USART2 CTS. */ - gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; - }; - }; -}; |