diff options
Diffstat (limited to 'dts/src/arm/at91-sama5d4_xplained.dts')
-rw-r--r-- | dts/src/arm/at91-sama5d4_xplained.dts | 298 |
1 files changed, 0 insertions, 298 deletions
diff --git a/dts/src/arm/at91-sama5d4_xplained.dts b/dts/src/arm/at91-sama5d4_xplained.dts deleted file mode 100644 index e519d27479..0000000000 --- a/dts/src/arm/at91-sama5d4_xplained.dts +++ /dev/null @@ -1,298 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board - * - * Copyright (C) 2015 Atmel, - * 2015 Josh Wu <josh.wu@atmel.com> - */ -/dts-v1/; -#include "sama5d4.dtsi" -#include <dt-bindings/input/input.h> - -/ { - model = "Atmel SAMA5D4 Xplained"; - compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@20000000 { - reg = <0x20000000 0x20000000>; - }; - - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <12000000>; - }; - }; - - ahb { - apb { - uart0: serial@f8004000 { - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "okay"; - }; - - i2c0: i2c@f8014000 { - i2c-digital-filter; - status = "okay"; - }; - - macb0: ethernet@f8020000 { - phy-mode = "rmii"; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>; - - phy0: ethernet-phy@1 { - interrupt-parent = <&pioE>; - interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - reg = <1>; - }; - }; - - mmc1: mmc@fc000000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; - vmmc-supply = <&vcc_mmc1_reg>; - vqmmc-supply = <&vcc_3v3_reg>; - status = "okay"; - slot@0 { - reg = <0>; - bus-width = <4>; - cd-gpios = <&pioE 3 0>; - }; - }; - - usart3: serial@fc00c000 { - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "okay"; - }; - - usart4: serial@fc010000 { - status = "okay"; - }; - - spi1: spi@fc018000 { - pinctrl-names = "default", "cs"; - pinctrl-1 = <&pinctrl_spi1_cs>; - cs-gpios = <&pioB 21 0>; - status = "okay"; - }; - - tcb2: timer@fc024000 { - timer0: timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>; - }; - - timer1: timer@1 { - compatible = "atmel,tcb-timer"; - reg = <1>; - }; - }; - - adc0: adc@fc034000 { - pinctrl-names = "default"; - pinctrl-0 = < - /* external trigger conflicts with USBA_VBUS */ - &pinctrl_adc0_ad0 - &pinctrl_adc0_ad1 - &pinctrl_adc0_ad2 - &pinctrl_adc0_ad3 - &pinctrl_adc0_ad4 - >; - atmel,adc-vref = <3300>; - status = "okay"; - }; - - watchdog@fc068640 { - status = "okay"; - }; - - pinctrl@fc06a000 { - board { - pinctrl_mmc1_cd: mmc1_cd { - atmel,pins = - <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; - }; - pinctrl_usba_vbus: usba_vbus { - atmel,pins = - <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; - }; - pinctrl_usb_default: usb_default { - atmel,pins = - <AT91_PIOE 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE - AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; - }; - pinctrl_key_gpio: key_gpio_0 { - atmel,pins = - <AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; - }; - pinctrl_macb0_phy_irq: macb0_phy_irq_0 { - atmel,pins = - <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; - }; - pinctrl_spi1_cs: spi1_cs_default { - atmel,pins = - <AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; - }; - pinctrl_gpio_leds: gpio_leds_default { - atmel,pins = - <AT91_PIOD 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE - AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; - }; - pinctrl_vcc_mmc1_reg: vcc_mmc1_reg { - atmel,pins = - <AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; - }; - }; - }; - }; - - usb0: gadget@400000 { - atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usba_vbus>; - status = "okay"; - }; - - usb1: ohci@500000 { - num-ports = <3>; - atmel,vbus-gpio = <0 - &pioE 11 GPIO_ACTIVE_HIGH - &pioE 14 GPIO_ACTIVE_HIGH - >; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_default>; - status = "okay"; - }; - - usb2: ehci@600000 { - status = "okay"; - }; - - ebi: ebi@10000000 { - pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe - &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy - &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>; - pinctrl-names = "default"; - status = "okay"; - - nand_controller: nand-controller { - status = "okay"; - - nand@3 { - reg = <0x3 0x0 0x2>; - atmel,rb = <0>; - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; - - bootloader@40000 { - label = "bootloader"; - reg = <0x40000 0xc0000>; - }; - - bootloaderenvred@100000 { - label = "bootloader env redundant"; - reg = <0x100000 0x40000>; - }; - - bootloaderenv@140000 { - label = "bootloader env"; - reg = <0x140000 0x40000>; - }; - - dtb@180000 { - label = "device tree"; - reg = <0x180000 0x80000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; - - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x1f800000>; - }; - }; - }; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_key_gpio>; - - pb_user1 { - label = "pb_user1"; - gpios = <&pioE 8 GPIO_ACTIVE_HIGH>; - linux,code = <KEY_PROG1>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_leds>; - status = "okay"; - - d8 { - label = "d8"; - gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - d10 { - label = "d10"; - gpios = <&pioE 15 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; - }; - }; - - vcc_3v3_reg: fixedregulator_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC 3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - vcc_mmc1_reg: fixedregulator_mmc1 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_vcc_mmc1_reg>; - gpio = <&pioE 4 GPIO_ACTIVE_LOW>; - regulator-name = "VDD MCI1"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_3v3_reg>; - regulator-always-on; - }; -}; |