diff options
Diffstat (limited to 'dts/src/arm/at91-sama5d4ek.dts')
-rw-r--r-- | dts/src/arm/at91-sama5d4ek.dts | 323 |
1 files changed, 0 insertions, 323 deletions
diff --git a/dts/src/arm/at91-sama5d4ek.dts b/dts/src/arm/at91-sama5d4ek.dts deleted file mode 100644 index fe432b6b7e..0000000000 --- a/dts/src/arm/at91-sama5d4ek.dts +++ /dev/null @@ -1,323 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit - * - * Copyright (C) 2014 Atmel, - * 2014 Nicolas Ferre <nicolas.ferre@atmel.com> - */ -/dts-v1/; -#include "sama5d4.dtsi" - -/ { - model = "Atmel SAMA5D4-EK"; - compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@20000000 { - reg = <0x20000000 0x20000000>; - }; - - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <12000000>; - }; - }; - - ahb { - apb { - adc0: adc@fc034000 { - pinctrl-names = "default"; - pinctrl-0 = < - /* external trigger conflicts with USBA_VBUS */ - &pinctrl_adc0_ad0 - &pinctrl_adc0_ad1 - &pinctrl_adc0_ad2 - &pinctrl_adc0_ad3 - &pinctrl_adc0_ad4 - >; - /* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */ - atmel,adc-vref = <3300>; - /*atmel,adc-ts-wires = <4>;*/ /* Set up ADC touch screen */ - status = "okay"; /* Enable ADC IIO support */ - }; - - mmc0: mmc@f8000000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; - slot@0 { - reg = <0>; - bus-width = <4>; - cd-gpios = <&pioE 5 0>; - }; - }; - - ssc0: ssc@f8008000 { - status = "okay"; - }; - - spi0: spi@f8010000 { - cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; - status = "okay"; - m25p80@0 { - compatible = "atmel,at25df321a"; - spi-max-frequency = <50000000>; - reg = <0>; - }; - }; - - i2c0: i2c@f8014000 { - status = "okay"; - - wm8904: codec@1a { - compatible = "wlf,wm8904"; - reg = <0x1a>; - clocks = <&pmc PMC_TYPE_SYSTEM 10>; - clock-names = "mclk"; - }; - - qt1070:keyboard@1b { - compatible = "qt1070"; - reg = <0x1b>; - interrupt-parent = <&pioE>; - interrupts = <25 0x0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_qt1070_irq>; - wakeup-source; - }; - - touchscreen@4c { - compatible = "atmel,maxtouch"; - reg = <0x4c>; - interrupt-parent = <&pioE>; - interrupts = <24 0x0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mxt_ts>; - }; - }; - - macb0: ethernet@f8020000 { - pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>; - phy-mode = "rmii"; - status = "okay"; - - ethernet-phy@1 { - reg = <0x1>; - interrupt-parent = <&pioE>; - interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - }; - }; - - mmc1: mmc@fc000000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; - status = "okay"; - slot@0 { - reg = <0>; - bus-width = <4>; - cd-gpios = <&pioE 6 0>; - }; - }; - - usart2: serial@fc008000 { - status = "okay"; - }; - - usart3: serial@fc00c000 { - status = "okay"; - }; - - usart4: serial@fc010000 { - status = "okay"; - }; - - tcb2: timer@fc024000 { - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>; - }; - - timer@1 { - compatible = "atmel,tcb-timer"; - reg = <1>; - }; - }; - - watchdog@fc068640 { - status = "okay"; - }; - - pinctrl@fc06a000 { - board { - pinctrl_macb0_phy_irq: macb0_phy_irq { - atmel,pins = - <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; - }; - pinctrl_mmc0_cd: mmc0_cd { - atmel,pins = - <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; - }; - pinctrl_mmc1_cd: mmc1_cd { - atmel,pins = - <AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; - }; - pinctrl_pck2_as_audio_mck: pck2_as_audio_mck { - atmel,pins = - <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; - }; - pinctrl_usba_vbus: usba_vbus { - atmel,pins = - <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; - }; - pinctrl_key_gpio: key_gpio_0 { - atmel,pins = - <AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */ - }; - pinctrl_qt1070_irq: qt1070_irq { - atmel,pins = - <AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; - }; - pinctrl_mxt_ts: mxt_irq { - atmel,pins = - <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; - }; - }; - }; - }; - - usb0: gadget@400000 { - atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usba_vbus>; - status = "okay"; - }; - - usb1: ohci@500000 { - num-ports = <3>; - atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */ - &pioE 11 GPIO_ACTIVE_LOW - &pioE 12 GPIO_ACTIVE_LOW - >; - status = "okay"; - }; - - usb2: ehci@600000 { - status = "okay"; - }; - - ebi: ebi@10000000 { - pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe - &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy - &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>; - pinctrl-names = "default"; - status = "okay"; - - nand_controller: nand-controller { - status = "okay"; - - nand@3 { - reg = <0x3 0x0 0x2>; - atmel,rb = <0>; - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; - - bootloader@40000 { - label = "bootloader"; - reg = <0x40000 0x80000>; - }; - - bootloaderenv@c0000 { - label = "bootloader env"; - reg = <0xc0000 0xc0000>; - }; - - dtb@180000 { - label = "device tree"; - reg = <0x180000 0x80000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; - - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; - }; - }; - }; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_key_gpio>; - - pb_user1 { - label = "pb_user1"; - gpios = <&pioE 13 GPIO_ACTIVE_HIGH>; - linux,code = <0x100>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - status = "okay"; - - d8 { - label = "d8"; - /* PE28, conflicts with usart4 rts pin */ - gpios = <&pioE 28 GPIO_ACTIVE_LOW>; - }; - - d9 { - label = "d9"; - gpios = <&pioE 9 GPIO_ACTIVE_HIGH>; - }; - - d10 { - label = "d10"; - gpios = <&pioE 8 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; - }; - }; - - sound { - compatible = "atmel,asoc-wm8904"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pck2_as_audio_mck>; - - atmel,model = "wm8904 @ SAMA5D4EK"; - atmel,audio-routing = - "Headphone Jack", "HPOUTL", - "Headphone Jack", "HPOUTR", - "IN1L", "Line In Jack", - "IN1R", "Line In Jack"; - - atmel,ssc-controller = <&ssc0>; - atmel,audio-codec = <&wm8904>; - }; -}; |