diff options
Diffstat (limited to 'dts/src/arm/at91-vinco.dts')
-rw-r--r-- | dts/src/arm/at91-vinco.dts | 231 |
1 files changed, 0 insertions, 231 deletions
diff --git a/dts/src/arm/at91-vinco.dts b/dts/src/arm/at91-vinco.dts deleted file mode 100644 index a51a3372af..0000000000 --- a/dts/src/arm/at91-vinco.dts +++ /dev/null @@ -1,231 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device Tree file for VInCo platform - * - * Copyright (C) 2014 Atmel, - * 2014 Nicolas Ferre <nicolas.ferre@atmel.com> - * 2015 Gregory CLEMENT <gregory.clement@free-electrons.com> - */ -/dts-v1/; -#include "sama5d4.dtsi" - -/ { - model = "L+G VInCo platform"; - compatible = "l+g,vinco", "atmel,sama5d4", "atmel,sama5"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@20000000 { - reg = <0x20000000 0x4000000>; - }; - - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <12000000>; - }; - }; - - ahb { - apb { - - adc0: adc@fc034000 { - status = "okay"; /* Enable ADC IIO support */ - }; - - mmc0: mmc@f8000000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 - &pinctrl_mmc0_dat1_3 - &pinctrl_mmc0_dat4_7>; - vqmmc-supply = <&vcc_3v3_reg>; - vmmc-supply = <&vcc_3v3_reg>; - no-1-8-v; - status = "okay"; - slot@0 { - reg = <0>; - bus-width = <8>; - non-removable; - broken-cd; - status = "okay"; - }; - }; - - spi0: spi@f8010000 { - cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; - status = "okay"; - m25p80@0 { - compatible = "n25q32b", "jedec,spi-nor"; - spi-max-frequency = <50000000>; - reg = <0>; - }; - }; - - i2c0: i2c@f8014000 { - status = "okay"; - }; - - i2c1: i2c@f8018000 { - status = "okay"; - /* kerkey security module */ - }; - - macb0: ethernet@f8020000 { - phy-mode = "rmii"; - status = "okay"; - - ethernet-phy@1 { - reg = <0x1>; - reset-gpios = <&pioE 8 GPIO_ACTIVE_LOW>; - interrupt-parent = <&pioB>; - interrupts = <15 IRQ_TYPE_EDGE_FALLING>; - }; - - }; - - i2c2: i2c@f8024000 { - status = "okay"; - - rtc1: rtc@32 { - compatible = "epson,rx8900"; - reg = <0x32>; - }; - }; - - usart2: serial@fc008000 { - /* MBUS */ - status = "okay"; - }; - - usart3: serial@fc00c000 { - /* debug */ - status = "okay"; - }; - - usart4: serial@fc010000 { - /* LMN */ - pinctrl-0 = <&pinctrl_usart4 &pinctrl_usart4_rts>; - linux,rs485-enabled-at-boot-time; - status = "okay"; - }; - - tcb2: timer@fc024000 { - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>; - }; - - timer@1 { - compatible = "atmel,tcb-timer"; - reg = <1>; - }; - }; - - macb1: ethernet@fc028000 { - phy-mode = "rmii"; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - ethernet-phy@1 { - reg = <0x1>; - interrupt-parent = <&pioB>; - interrupts = <31 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&pioE 6 GPIO_ACTIVE_LOW>; - }; - }; - - watchdog@fc068640 { - status = "okay"; - }; - - pinctrl@fc06a000 { - board { - pinctrl_usba_vbus: usba_vbus { - atmel,pins = - <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; - }; - }; - }; - }; - - usb0: gadget@400000 { - atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usba_vbus>; - status = "disable"; - }; - - usb1: ohci@500000 { - num-ports = <3>; - atmel,vbus-gpio = <0 - &pioE 11 GPIO_ACTIVE_LOW - &pioE 12 GPIO_ACTIVE_LOW - >; - status = "disable"; - }; - - usb2: ehci@600000 { - /* 4G Modem */ - status = "okay"; - }; - - }; - - leds { - compatible = "gpio-leds"; - status = "okay"; - - led_err { - label = "err"; - gpios = <&pioA 7 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led_rssi { - label = "rssi"; - gpios = <&pioA 9 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led_tls { - label = "tls"; - gpios = <&pioA 24 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led_lmc { - label = "lmc"; - gpios = <&pioA 25 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led_wmt { - label = "wmt"; - gpios = <&pioA 29 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led_pwr { - label = "pwr"; - gpios = <&pioA 26 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - }; - - vcc_3v3_reg: fixedregulator_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC 3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; -}; |