diff options
Diffstat (limited to 'dts/src/arm/at91sam9260ek.dts')
-rw-r--r-- | dts/src/arm/at91sam9260ek.dts | 188 |
1 files changed, 0 insertions, 188 deletions
diff --git a/dts/src/arm/at91sam9260ek.dts b/dts/src/arm/at91sam9260ek.dts deleted file mode 100644 index 6381088ba2..0000000000 --- a/dts/src/arm/at91sam9260ek.dts +++ /dev/null @@ -1,188 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device Tree file for Atmel at91sam9260 Evaluation Kit - * - * Copyright (C) 2016 Atmel, - * 2016 Nicolas Ferre <nicolas.ferre@atmel.com> - */ -/dts-v1/; -#include "at91sam9260.dtsi" -#include <dt-bindings/input/input.h> - -/ { - model = "Atmel at91sam9260ek"; - compatible = "atmel,at91sam9260ek", "atmel,at91sam9260", "atmel,at91sam9"; - - chosen { - stdout-path = &dbgu; - }; - - memory@20000000 { - reg = <0x20000000 0x4000000>; - }; - - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <18432000>; - }; - }; - - ahb { - apb { - tcb0: timer@fffa0000 { - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>, <1>; - }; - - timer@2 { - compatible = "atmel,tcb-timer"; - reg = <2>; - }; - }; - - usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - - mmc0: mmc@fffa8000 { - pinctrl-0 = < - &pinctrl_board_mmc0_slot1 - &pinctrl_mmc0_clk - &pinctrl_mmc0_slot1_cmd_dat0 - &pinctrl_mmc0_slot1_dat1_3>; - pinctrl-names = "default"; - status = "okay"; - slot@1 { - reg = <1>; - bus-width = <4>; - cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>; - }; - }; - - usart0: serial@fffb0000 { - pinctrl-0 = - <&pinctrl_usart0 - &pinctrl_usart0_rts - &pinctrl_usart0_cts - &pinctrl_usart0_dtr_dsr - &pinctrl_usart0_dcd - &pinctrl_usart0_ri>; - status = "okay"; - }; - - usart1: serial@fffb4000 { - status = "okay"; - }; - - ssc0: ssc@fffbc000 { - status = "okay"; - pinctrl-0 = <&pinctrl_ssc0_tx>; - }; - - macb0: ethernet@fffc4000 { - phy-mode = "rmii"; - status = "okay"; - }; - - spi0: spi@fffc8000 { - cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; - flash@1 { - compatible = "atmel,at45", "atmel,dataflash"; - spi-max-frequency = <50000000>; - reg = <1>; - }; - }; - - dbgu: serial@fffff200 { - status = "okay"; - }; - - pinctrl@fffff400 { - board { - pinctrl_board_mmc0_slot1: mmc0_slot1-board { - atmel,pins = - <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; - }; - }; - }; - - shdwc@fffffd10 { - atmel,wakeup-counter = <10>; - atmel,wakeup-rtt-timer; - }; - - rtc@fffffd20 { - atmel,rtt-rtc-time-reg = <&gpbr 0x0>; - status = "okay"; - }; - - watchdog@fffffd40 { - status = "okay"; - }; - - gpbr: syscon@fffffd50 { - status = "okay"; - }; - }; - - usb0: ohci@500000 { - num-ports = <2>; - status = "okay"; - }; - - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; - status = "okay"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - - btn3 { - label = "Button 3"; - gpios = <&pioA 30 GPIO_ACTIVE_LOW>; - linux,code = <0x103>; - wakeup-source; - }; - - btn4 { - label = "Button 4"; - gpios = <&pioA 31 GPIO_ACTIVE_LOW>; - linux,code = <KEY_PROG1>; - wakeup-source; - }; - }; - - i2c-gpio-0 { - status = "okay"; - - 24c512@50 { - compatible = "atmel,24c512"; - reg = <0x50>; - }; - }; - - leds { - compatible = "gpio-leds"; - - ds1 { - label = "ds1"; - gpios = <&pioA 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - - ds5 { - label = "ds5"; - gpios = <&pioA 6 GPIO_ACTIVE_LOW>; - }; - }; -}; |