diff options
Diffstat (limited to 'dts/src/arm/at91sam9263ek.dts')
-rw-r--r-- | dts/src/arm/at91sam9263ek.dts | 258 |
1 files changed, 0 insertions, 258 deletions
diff --git a/dts/src/arm/at91sam9263ek.dts b/dts/src/arm/at91sam9263ek.dts deleted file mode 100644 index 42e7340202..0000000000 --- a/dts/src/arm/at91sam9263ek.dts +++ /dev/null @@ -1,258 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board - * - * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - */ -/dts-v1/; -#include "at91sam9263.dtsi" - -/ { - model = "Atmel at91sam9263ek"; - compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9"; - - chosen { - bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs"; - stdout-path = "serial0:115200n8"; - }; - - memory@20000000 { - reg = <0x20000000 0x4000000>; - }; - - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <16367660>; - }; - }; - - ahb { - apb { - dbgu: serial@ffffee00 { - status = "okay"; - }; - - tcb0: timer@fff7c000 { - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>, <1>; - }; - - timer@2 { - compatible = "atmel,tcb-timer"; - reg = <2>; - }; - }; - - usart0: serial@fff8c000 { - pinctrl-0 = < - &pinctrl_usart0 - &pinctrl_usart0_rts - &pinctrl_usart0_cts>; - status = "okay"; - }; - - macb0: ethernet@fffbc000 { - phy-mode = "rmii"; - status = "okay"; - }; - - usb1: gadget@fff78000 { - atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - - mmc0: mmc@fff80000 { - pinctrl-0 = < - &pinctrl_board_mmc0 - &pinctrl_mmc0_clk - &pinctrl_mmc0_slot0_cmd_dat0 - &pinctrl_mmc0_slot0_dat1_3>; - pinctrl-names = "default"; - status = "okay"; - slot@0 { - reg = <0>; - bus-width = <4>; - cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>; - wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>; - }; - }; - - pinctrl@fffff200 { - mmc0 { - pinctrl_board_mmc0: mmc0-board { - atmel,pins = - <AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PE18 gpio CD pin pull up and deglitch */ - AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PE19 gpio WP pin pull up */ - }; - }; - }; - - spi0: spi@fffa4000 { - status = "okay"; - cs-gpios = <&pioA 5 0>, <0>, <0>, <0>; - flash@0 { - compatible = "atmel,at45", "atmel,dataflash"; - spi-max-frequency = <50000000>; - reg = <0>; - }; - }; - - watchdog@fffffd40 { - status = "okay"; - }; - }; - - fb0: fb@700000 { - display = <&display0>; - status = "okay"; - - display0: panel { - bits-per-pixel = <16>; - atmel,lcdcon-backlight; - atmel,dmacon = <0x1>; - atmel,lcdcon2 = <0x80008002>; - atmel,guard-time = <1>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <4965000>; - hactive = <240>; - vactive = <320>; - hback-porch = <1>; - hfront-porch = <33>; - vback-porch = <1>; - vfront-porch = <0>; - hsync-len = <5>; - vsync-len = <1>; - hsync-active = <1>; - vsync-active = <1>; - }; - }; - }; - }; - - ebi0: ebi@10000000 { - status = "okay"; - - nand_controller: nand-controller { - status = "okay"; - pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; - pinctrl-names = "default"; - - nand@3 { - reg = <0x3 0x0 0x800000>; - rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x20000>; - }; - - barebox@20000 { - label = "barebox"; - reg = <0x20000 0x40000>; - }; - - bareboxenv@60000 { - label = "bareboxenv"; - reg = <0x60000 0x20000>; - }; - - bareboxenv2@80000 { - label = "bareboxenv2"; - reg = <0x80000 0x20000>; - }; - - oftree@80000 { - label = "oftree"; - reg = <0xa0000 0x20000>; - }; - - kernel@a0000 { - label = "kernel"; - reg = <0xc0000 0x400000>; - }; - - rootfs@4a0000 { - label = "rootfs"; - reg = <0x4c0000 0x7800000>; - }; - - data@7ca0000 { - label = "data"; - reg = <0x7cc0000 0x8340000>; - }; - }; - }; - }; - }; - - usb0: ohci@a00000 { - num-ports = <2>; - status = "okay"; - atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH - &pioA 21 GPIO_ACTIVE_HIGH - >; - }; - }; - - leds { - compatible = "gpio-leds"; - - d3 { - label = "d3"; - gpios = <&pioB 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - - d2 { - label = "d2"; - gpios = <&pioC 29 GPIO_ACTIVE_LOW>; - linux,default-trigger = "nand-disk"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - - left_click { - label = "left_click"; - gpios = <&pioC 5 GPIO_ACTIVE_LOW>; - linux,code = <272>; - wakeup-source; - }; - - right_click { - label = "right_click"; - gpios = <&pioC 4 GPIO_ACTIVE_LOW>; - linux,code = <273>; - wakeup-source; - }; - }; - - i2c-gpio-0 { - status = "okay"; - - 24c512@50 { - compatible = "atmel,24c512"; - reg = <0x50>; - pagesize = <128>; - }; - }; -}; |