summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/at91sam9g20ek_common.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm/at91sam9g20ek_common.dtsi')
-rw-r--r--dts/src/arm/at91sam9g20ek_common.dtsi300
1 files changed, 0 insertions, 300 deletions
diff --git a/dts/src/arm/at91sam9g20ek_common.dtsi b/dts/src/arm/at91sam9g20ek_common.dtsi
deleted file mode 100644
index 60d61291f3..0000000000
--- a/dts/src/arm/at91sam9g20ek_common.dtsi
+++ /dev/null
@@ -1,300 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board
- *
- * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-#include "at91sam9g20.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-
- chosen {
- bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
- stdout-path = "serial0:115200n8";
- };
-
- memory@20000000 {
- reg = <0x20000000 0x4000000>;
- };
-
- clocks {
- slow_xtal {
- clock-frequency = <32768>;
- };
-
- main_xtal {
- clock-frequency = <18432000>;
- };
- };
-
- ahb {
- apb {
- pinctrl@fffff400 {
- board {
- pinctrl_pck0_as_mck: pck0_as_mck {
- atmel,pins =
- <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC1 periph B */
- };
-
- };
-
- mmc0_slot1 {
- pinctrl_board_mmc0_slot1: mmc0_slot1-board {
- atmel,pins =
- <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC9 gpio CD pin pull up and deglitch */
- };
- };
- };
-
- dbgu: serial@fffff200 {
- status = "okay";
- };
-
- tcb0: timer@fffa0000 {
- timer@0 {
- compatible = "atmel,tcb-timer";
- reg = <0>, <1>;
- };
-
- timer@2 {
- compatible = "atmel,tcb-timer";
- reg = <2>;
- };
- };
-
- usart0: serial@fffb0000 {
- pinctrl-0 =
- <&pinctrl_usart0
- &pinctrl_usart0_rts
- &pinctrl_usart0_cts
- &pinctrl_usart0_dtr_dsr
- &pinctrl_usart0_dcd
- &pinctrl_usart0_ri>;
- status = "okay";
- };
-
- usart1: serial@fffb4000 {
- status = "okay";
- };
-
- macb0: ethernet@fffc4000 {
- phy-mode = "rmii";
- status = "okay";
- };
-
- usb1: gadget@fffa4000 {
- atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
-
- mmc0: mmc@fffa8000 {
- pinctrl-0 = <
- &pinctrl_board_mmc0_slot1
- &pinctrl_mmc0_clk
- &pinctrl_mmc0_slot1_cmd_dat0
- &pinctrl_mmc0_slot1_dat1_3>;
- pinctrl-names = "default";
- status = "okay";
- slot@1 {
- reg = <1>;
- bus-width = <4>;
- cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
- };
- };
-
- ssc0: ssc@fffbc000 {
- status = "okay";
- pinctrl-0 = <&pinctrl_ssc0_tx>;
- };
-
- spi0: spi@fffc8000 {
- cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
- flash@1 {
- compatible = "atmel,at45", "atmel,dataflash";
- spi-max-frequency = <50000000>;
- reg = <1>;
- };
- };
-
- shdwc@fffffd10 {
- atmel,wakeup-counter = <10>;
- atmel,wakeup-rtt-timer;
- };
-
- rtc@fffffd20 {
- atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
- status = "okay";
- };
-
- watchdog@fffffd40 {
- status = "okay";
- };
-
- gpbr: syscon@fffffd50 {
- status = "okay";
- };
- };
-
- ebi: ebi@10000000 {
- status = "okay";
-
- nand_controller: nand-controller {
- status = "okay";
- pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
- pinctrl-names = "default";
-
- nand@3 {
- reg = <0x3 0x0 0x800000>;
- rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
- cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
- nand-bus-width = <8>;
- nand-ecc-mode = "soft";
- nand-on-flash-bbt;
- label = "atmel_nand";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- at91bootstrap@0 {
- label = "at91bootstrap";
- reg = <0x0 0x20000>;
- };
-
- barebox@20000 {
- label = "barebox";
- reg = <0x20000 0x40000>;
- };
-
- bareboxenv@60000 {
- label = "bareboxenv";
- reg = <0x60000 0x20000>;
- };
-
- bareboxenv2@80000 {
- label = "bareboxenv2";
- reg = <0x80000 0x20000>;
- };
-
- oftree@80000 {
- label = "oftree";
- reg = <0xa0000 0x20000>;
- };
-
- kernel@a0000 {
- label = "kernel";
- reg = <0xc0000 0x400000>;
- };
-
- rootfs@4a0000 {
- label = "rootfs";
- reg = <0x4c0000 0x7800000>;
- };
-
- data@7ca0000 {
- label = "data";
- reg = <0x7cc0000 0x8340000>;
- };
- };
- };
- };
- };
-
- usb0: ohci@500000 {
- num-ports = <2>;
- status = "okay";
- };
- };
-
- i2c-gpio-0 {
- status = "okay";
-
- 24c512@50 {
- compatible = "atmel,24c512";
- reg = <0x50>;
- vcc-supply = <&reg_3v3>;
- };
-
- wm8731: wm8731@1b {
- compatible = "wm8731";
- reg = <0x1b>;
-
- /* PCK0 at 12MHz */
- clocks = <&pmc PMC_TYPE_SYSTEM 8>;
- clock-names = "mclk";
- assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
- assigned-clock-rates = <12000000>;
-
- HPVDD-supply = <&vcc_dac>;
- AVDD-supply = <&vcc_dac>;
- DCVDD-supply = <&reg_3v3>;
- DBVDD-supply = <&reg_3v3>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- button-3 {
- label = "Button 3";
- gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
- linux,code = <0x103>;
- wakeup-source;
- };
-
- button-4 {
- label = "Button 4";
- gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_PROG1>;
- wakeup-source;
- };
- };
-
- sound {
- compatible = "atmel,at91sam9g20ek-wm8731-audio";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pck0_as_mck>;
-
- atmel,model = "wm8731 @ AT91SAMG20EK";
-
- atmel,audio-routing =
- "Ext Spk", "LHPOUT",
- "Int Mic", "MICIN";
-
- atmel,ssc-controller = <&ssc0>;
- atmel,audio-codec = <&wm8731>;
- };
-
- reg_5v: fixedregulator0 {
- compatible = "regulator-fixed";
- regulator-name = "5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- reg_3v3: fixedregulator1 {
- compatible = "regulator-fixed";
- regulator-name = "3V3";
- vin-supply = <&reg_5v>;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- reg_1v: fixedregulator2 {
- compatible = "regulator-fixed";
- regulator-name = "1V";
- vin-supply = <&reg_5v>;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- vcc_dac: fixedregulator3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_DAC";
- vin-supply = <&reg_3v3>;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-};