diff options
Diffstat (limited to 'dts/src/arm/at91sam9g20ek_common.dtsi')
-rw-r--r-- | dts/src/arm/at91sam9g20ek_common.dtsi | 300 |
1 files changed, 0 insertions, 300 deletions
diff --git a/dts/src/arm/at91sam9g20ek_common.dtsi b/dts/src/arm/at91sam9g20ek_common.dtsi deleted file mode 100644 index 85c17dd1c8..0000000000 --- a/dts/src/arm/at91sam9g20ek_common.dtsi +++ /dev/null @@ -1,300 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board - * - * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - */ -#include "at91sam9g20.dtsi" -#include <dt-bindings/input/input.h> - -/ { - - chosen { - bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs"; - stdout-path = "serial0:115200n8"; - }; - - memory@20000000 { - reg = <0x20000000 0x4000000>; - }; - - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <18432000>; - }; - }; - - ahb { - apb { - pinctrl@fffff400 { - board { - pinctrl_pck0_as_mck: pck0_as_mck { - atmel,pins = - <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC1 periph B */ - }; - - }; - - mmc0_slot1 { - pinctrl_board_mmc0_slot1: mmc0_slot1-board { - atmel,pins = - <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC9 gpio CD pin pull up and deglitch */ - }; - }; - }; - - dbgu: serial@fffff200 { - status = "okay"; - }; - - tcb0: timer@fffa0000 { - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>, <1>; - }; - - timer@2 { - compatible = "atmel,tcb-timer"; - reg = <2>; - }; - }; - - usart0: serial@fffb0000 { - pinctrl-0 = - <&pinctrl_usart0 - &pinctrl_usart0_rts - &pinctrl_usart0_cts - &pinctrl_usart0_dtr_dsr - &pinctrl_usart0_dcd - &pinctrl_usart0_ri>; - status = "okay"; - }; - - usart1: serial@fffb4000 { - status = "okay"; - }; - - macb0: ethernet@fffc4000 { - phy-mode = "rmii"; - status = "okay"; - }; - - usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - - mmc0: mmc@fffa8000 { - pinctrl-0 = < - &pinctrl_board_mmc0_slot1 - &pinctrl_mmc0_clk - &pinctrl_mmc0_slot1_cmd_dat0 - &pinctrl_mmc0_slot1_dat1_3>; - pinctrl-names = "default"; - status = "okay"; - slot@1 { - reg = <1>; - bus-width = <4>; - cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>; - }; - }; - - ssc0: ssc@fffbc000 { - status = "okay"; - pinctrl-0 = <&pinctrl_ssc0_tx>; - }; - - spi0: spi@fffc8000 { - cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; - flash@1 { - compatible = "atmel,at45", "atmel,dataflash"; - spi-max-frequency = <50000000>; - reg = <1>; - }; - }; - - shdwc@fffffd10 { - atmel,wakeup-counter = <10>; - atmel,wakeup-rtt-timer; - }; - - rtc@fffffd20 { - atmel,rtt-rtc-time-reg = <&gpbr 0x0>; - status = "okay"; - }; - - watchdog@fffffd40 { - status = "okay"; - }; - - gpbr: syscon@fffffd50 { - status = "okay"; - }; - }; - - ebi: ebi@10000000 { - status = "okay"; - - nand_controller: nand-controller { - status = "okay"; - pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; - pinctrl-names = "default"; - - nand@3 { - reg = <0x3 0x0 0x800000>; - rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x20000>; - }; - - barebox@20000 { - label = "barebox"; - reg = <0x20000 0x40000>; - }; - - bareboxenv@60000 { - label = "bareboxenv"; - reg = <0x60000 0x20000>; - }; - - bareboxenv2@80000 { - label = "bareboxenv2"; - reg = <0x80000 0x20000>; - }; - - oftree@80000 { - label = "oftree"; - reg = <0xa0000 0x20000>; - }; - - kernel@a0000 { - label = "kernel"; - reg = <0xc0000 0x400000>; - }; - - rootfs@4a0000 { - label = "rootfs"; - reg = <0x4c0000 0x7800000>; - }; - - data@7ca0000 { - label = "data"; - reg = <0x7cc0000 0x8340000>; - }; - }; - }; - }; - }; - - usb0: ohci@500000 { - num-ports = <2>; - status = "okay"; - }; - }; - - i2c-gpio-0 { - status = "okay"; - - 24c512@50 { - compatible = "atmel,24c512"; - reg = <0x50>; - vcc-supply = <®_3v3>; - }; - - wm8731: wm8731@1b { - compatible = "wm8731"; - reg = <0x1b>; - - /* PCK0 at 12MHz */ - clocks = <&pmc PMC_TYPE_SYSTEM 8>; - clock-names = "mclk"; - assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>; - assigned-clock-rates = <12000000>; - - HPVDD-supply = <&vcc_dac>; - AVDD-supply = <&vcc_dac>; - DCVDD-supply = <®_3v3>; - DBVDD-supply = <®_3v3>; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - - btn3 { - label = "Button 3"; - gpios = <&pioA 30 GPIO_ACTIVE_LOW>; - linux,code = <0x103>; - wakeup-source; - }; - - btn4 { - label = "Button 4"; - gpios = <&pioA 31 GPIO_ACTIVE_LOW>; - linux,code = <KEY_PROG1>; - wakeup-source; - }; - }; - - sound { - compatible = "atmel,at91sam9g20ek-wm8731-audio"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pck0_as_mck>; - - atmel,model = "wm8731 @ AT91SAMG20EK"; - - atmel,audio-routing = - "Ext Spk", "LHPOUT", - "Int Mic", "MICIN"; - - atmel,ssc-controller = <&ssc0>; - atmel,audio-codec = <&wm8731>; - }; - - reg_5v: fixedregulator0 { - compatible = "regulator-fixed"; - regulator-name = "5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_3v3: fixedregulator1 { - compatible = "regulator-fixed"; - regulator-name = "3V3"; - vin-supply = <®_5v>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_1v: fixedregulator2 { - compatible = "regulator-fixed"; - regulator-name = "1V"; - vin-supply = <®_5v>; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - vcc_dac: fixedregulator3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_DAC"; - vin-supply = <®_3v3>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; -}; |