diff options
Diffstat (limited to 'dts/src/arm/at91sam9m10g45ek.dts')
-rw-r--r-- | dts/src/arm/at91sam9m10g45ek.dts | 391 |
1 files changed, 0 insertions, 391 deletions
diff --git a/dts/src/arm/at91sam9m10g45ek.dts b/dts/src/arm/at91sam9m10g45ek.dts deleted file mode 100644 index 84bed6f55f..0000000000 --- a/dts/src/arm/at91sam9m10g45ek.dts +++ /dev/null @@ -1,391 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board - * - * Copyright (C) 2011 Atmel, - * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> - */ -/dts-v1/; -#include "at91sam9g45.dtsi" -#include <dt-bindings/pwm/pwm.h> - -/ { - model = "Atmel AT91SAM9M10G45-EK"; - compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9"; - - chosen { - bootargs = "mem=64M root=/dev/mtdblock1 rw rootfstype=jffs2"; - stdout-path = "serial0:115200n8"; - }; - - memory { - reg = <0x70000000 0x4000000>; - }; - - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <12000000>; - }; - }; - - ahb { - apb { - dbgu: serial@ffffee00 { - status = "okay"; - }; - - tcb0: timer@fff7c000 { - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>, <1>; - }; - - timer@2 { - compatible = "atmel,tcb-timer"; - reg = <2>; - }; - }; - - usart1: serial@fff90000 { - pinctrl-0 = - <&pinctrl_usart1 - &pinctrl_usart1_rts - &pinctrl_usart1_cts>; - status = "okay"; - }; - - macb0: ethernet@fffbc000 { - phy-mode = "rmii"; - status = "okay"; - }; - - i2c0: i2c@fff84000 { - status = "okay"; - ov2640: camera@30 { - compatible = "ovti,ov2640"; - reg = <0x30>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; - resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>; - pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>; - clocks = <&pck1>; - clock-names = "xvclk"; - assigned-clocks = <&pck1>; - assigned-clock-rates = <25000000>; - - port { - ov2640_0: endpoint { - remote-endpoint = <&isi_0>; - bus-width = <8>; - }; - }; - }; - }; - - i2c1: i2c@fff88000 { - status = "okay"; - }; - - watchdog@fffffd40 { - status = "okay"; - }; - - mmc0: mmc@fff80000 { - pinctrl-0 = < - &pinctrl_board_mmc0 - &pinctrl_mmc0_slot0_clk_cmd_dat0 - &pinctrl_mmc0_slot0_dat1_3>; - status = "okay"; - slot@0 { - reg = <0>; - bus-width = <4>; - cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>; - }; - }; - - mmc1: mmc@fffd0000 { - pinctrl-0 = < - &pinctrl_board_mmc1 - &pinctrl_mmc1_slot0_clk_cmd_dat0 - &pinctrl_mmc1_slot0_dat1_3>; - status = "okay"; - slot@0 { - reg = <0>; - bus-width = <4>; - cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>; - wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>; - }; - }; - - pinctrl@fffff200 { - camera_sensor { - pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 { - atmel,pins = - <AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; - }; - - pinctrl_sensor_reset: sensor_reset-0 { - atmel,pins = - <AT91_PIOD 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; - }; - - pinctrl_sensor_power: sensor_power-0 { - atmel,pins = - <AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; - }; - }; - mmc0 { - pinctrl_board_mmc0: mmc0-board { - atmel,pins = - <AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD10 gpio CD pin pull up and deglitch */ - }; - }; - - mmc1 { - pinctrl_board_mmc1: mmc1-board { - atmel,pins = - <AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PD11 gpio CD pin pull up and deglitch */ - AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD29 gpio WP pin pull up */ - }; - }; - - pwm0 { - pinctrl_pwm_leds: pwm-led { - atmel,pins = - <AT91_PIOD 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PD0 periph B */ - AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PD31 periph B */ - }; - }; - }; - - spi0: spi@fffa4000{ - status = "okay"; - cs-gpios = <&pioB 3 0>, <0>, <0>, <0>; - mtd_dataflash@0 { - compatible = "atmel,at45", "atmel,dataflash"; - spi-max-frequency = <13000000>; - reg = <0>; - }; - }; - - usb2: gadget@fff78000 { - atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - - ac97: sound@fffac000 { - status = "okay"; - }; - - adc0: adc@fffb0000 { - pinctrl-names = "default"; - pinctrl-0 = < - &pinctrl_adc0_ad0 - &pinctrl_adc0_ad1 - &pinctrl_adc0_ad2 - &pinctrl_adc0_ad3 - &pinctrl_adc0_ad4 - &pinctrl_adc0_ad5 - &pinctrl_adc0_ad6 - &pinctrl_adc0_ad7>; - atmel,adc-ts-wires = <4>; - status = "okay"; - }; - - isi@fffb4000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_isi_data_0_7>; - status = "okay"; - port { - isi_0: endpoint { - remote-endpoint = <&ov2640_0>; - bus-width = <8>; - vsync-active = <1>; - hsync-active = <1>; - }; - }; - }; - - pwm0: pwm@fffb8000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm_leds>; - }; - - rtc@fffffd20 { - atmel,rtt-rtc-time-reg = <&gpbr 0x0>; - status = "okay"; - }; - - gpbr: syscon@fffffd60 { - status = "okay"; - }; - - rtc@fffffdb0 { - status = "okay"; - }; - }; - - fb0: fb@500000 { - display = <&display0>; - status = "okay"; - - display0: panel { - bits-per-pixel = <32>; - atmel,lcdcon-backlight; - atmel,dmacon = <0x1>; - atmel,lcdcon2 = <0x80008002>; - atmel,guard-time = <9>; - atmel,lcd-wiring-mode = "RGB"; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hback-porch = <1>; - hfront-porch = <1>; - vback-porch = <40>; - vfront-porch = <1>; - hsync-len = <45>; - vsync-len = <1>; - }; - }; - }; - }; - - ebi: ebi@10000000 { - status = "okay"; - - nand_controller: nand-controller { - status = "okay"; - pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; - pinctrl-names = "default"; - - nand@3 { - reg = <0x3 0x0 0x800000>; - rb-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - boot@0 { - label = "bootstrap/uboot/kernel"; - reg = <0x0 0x400000>; - }; - - rootfs@400000 { - label = "rootfs"; - reg = <0x400000 0x3C00000>; - }; - - data@4000000 { - label = "data"; - reg = <0x4000000 0xC000000>; - }; - }; - }; - }; - }; - - usb0: ohci@700000 { - status = "okay"; - num-ports = <2>; - atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW - &pioD 3 GPIO_ACTIVE_LOW>; - }; - - usb1: ehci@800000 { - status = "okay"; - }; - }; - - leds { - compatible = "gpio-leds"; - - d8 { - label = "d8"; - gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - pwmleds { - compatible = "pwm-leds"; - - d6 { - label = "d6"; - pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>; - max-brightness = <255>; - linux,default-trigger = "nand-disk"; - }; - - d7 { - label = "d7"; - pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>; - max-brightness = <255>; - linux,default-trigger = "mmc0"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - - left_click { - label = "left_click"; - gpios = <&pioB 6 GPIO_ACTIVE_LOW>; - linux,code = <272>; - wakeup-source; - }; - - right_click { - label = "right_click"; - gpios = <&pioB 7 GPIO_ACTIVE_LOW>; - linux,code = <273>; - wakeup-source; - }; - - left { - label = "Joystick Left"; - gpios = <&pioB 14 GPIO_ACTIVE_LOW>; - linux,code = <105>; - }; - - right { - label = "Joystick Right"; - gpios = <&pioB 15 GPIO_ACTIVE_LOW>; - linux,code = <106>; - }; - - up { - label = "Joystick Up"; - gpios = <&pioB 16 GPIO_ACTIVE_LOW>; - linux,code = <103>; - }; - - down { - label = "Joystick Down"; - gpios = <&pioB 17 GPIO_ACTIVE_LOW>; - linux,code = <108>; - }; - - enter { - label = "Joystick Press"; - gpios = <&pioB 18 GPIO_ACTIVE_LOW>; - linux,code = <28>; - }; - }; -}; |