diff options
Diffstat (limited to 'dts/src/arm/bcm-nsp.dtsi')
| -rw-r--r-- | dts/src/arm/bcm-nsp.dtsi | 663 |
1 files changed, 0 insertions, 663 deletions
diff --git a/dts/src/arm/bcm-nsp.dtsi b/dts/src/arm/bcm-nsp.dtsi deleted file mode 100644 index 748df7955a..0000000000 --- a/dts/src/arm/bcm-nsp.dtsi +++ /dev/null @@ -1,663 +0,0 @@ -/* - * BSD LICENSE - * - * Copyright(c) 2015 Broadcom Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Broadcom Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/clock/bcm-nsp.h> - -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "brcm,nsp"; - model = "Broadcom Northstar Plus SoC"; - interrupt-parent = <&gic>; - - aliases { - serial0 = &uart0; - serial1 = &uart1; - ethernet0 = &amac0; - ethernet1 = &amac1; - ethernet2 = &amac2; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - next-level-cache = <&L2>; - reg = <0x0>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - next-level-cache = <&L2>; - enable-method = "brcm,bcm-nsp-smp"; - secondary-boot-reg = <0xffff0fec>; - reg = <0x1>; - }; - }; - - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>; - }; - - mpcore@19000000 { - compatible = "simple-bus"; - ranges = <0x00000000 0x19000000 0x00023000>; - #address-cells = <1>; - #size-cells = <1>; - - a9pll: arm_clk@0 { - #clock-cells = <0>; - compatible = "brcm,nsp-armpll"; - clocks = <&osc>; - reg = <0x00000 0x1000>; - }; - - timer@20200 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x20200 0x100>; - interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; - clocks = <&periph_clk>; - }; - - twd-timer@20600 { - compatible = "arm,cortex-a9-twd-timer"; - reg = <0x20600 0x20>; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_EDGE_RISING)>; - clocks = <&periph_clk>; - }; - - twd-watchdog@20620 { - compatible = "arm,cortex-a9-twd-wdt"; - reg = <0x20620 0x20>; - interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_HIGH)>; - clocks = <&periph_clk>; - }; - - gic: interrupt-controller@21000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x21000 0x1000>, - <0x20100 0x100>; - }; - - L2: cache-controller@22000 { - compatible = "arm,pl310-cache"; - reg = <0x22000 0x1000>; - cache-unified; - cache-level = <2>; - }; - }; - - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - osc: oscillator { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - }; - - iprocmed: iprocmed { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>; - clock-div = <2>; - clock-mult = <1>; - }; - - iprocslow: iprocslow { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>; - clock-div = <4>; - clock-mult = <1>; - }; - - periph_clk: periph_clk { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&a9pll>; - clock-div = <2>; - clock-mult = <1>; - }; - }; - - axi@18000000 { - compatible = "simple-bus"; - ranges = <0x00000000 0x18000000 0x0011c40c>; - #address-cells = <1>; - #size-cells = <1>; - - gpioa: gpio@20 { - compatible = "brcm,nsp-gpio-a"; - reg = <0x0020 0x70>, - <0x3f1c4 0x1c>; - #gpio-cells = <2>; - gpio-controller; - ngpios = <32>; - interrupt-controller; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - gpio-ranges = <&pinctrl 0 0 32>; - }; - - uart0: serial@300 { - compatible = "ns16550a"; - reg = <0x0300 0x100>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc>; - status = "disabled"; - }; - - uart1: serial@400 { - compatible = "ns16550a"; - reg = <0x0400 0x100>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc>; - status = "disabled"; - }; - - dma: dma@20000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x20000 0x1000>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&iprocslow>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - dma-coherent; - status = "disabled"; - }; - - sdio: sdhci@21000 { - compatible = "brcm,sdhci-iproc-cygnus"; - reg = <0x21000 0x100>; - interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; - sdhci,auto-cmd12; - clocks = <&lcpll0 BCM_NSP_LCPLL0_SDIO_CLK>; - dma-coherent; - status = "disabled"; - }; - - amac0: ethernet@22000 { - compatible = "brcm,nsp-amac"; - reg = <0x022000 0x1000>, - <0x110000 0x1000>; - reg-names = "amac_base", "idm_base"; - interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; - dma-coherent; - status = "disabled"; - }; - - amac1: ethernet@23000 { - compatible = "brcm,nsp-amac"; - reg = <0x023000 0x1000>, - <0x111000 0x1000>; - reg-names = "amac_base", "idm_base"; - interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; - dma-coherent; - status = "disabled"; - }; - - amac2: ethernet@24000 { - compatible = "brcm,nsp-amac"; - reg = <0x024000 0x1000>, - <0x112000 0x1000>; - reg-names = "amac_base", "idm_base"; - interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; - dma-coherent; - status = "disabled"; - }; - - mailbox: mailbox@25c00 { - compatible = "brcm,iproc-fa2-mbox"; - reg = <0x25c00 0x400>; - interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <1>; - brcm,rx-status-len = <32>; - brcm,use-bcm-hdr; - dma-coherent; - }; - - nand_controller: nand-controller@26000 { - compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; - reg = <0x026000 0x600>, - <0x11b408 0x600>, - <0x026f00 0x20>; - reg-names = "nand", "iproc-idm", "iproc-ext"; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; - - #address-cells = <1>; - #size-cells = <0>; - - brcm,nand-has-wp; - }; - - qspi: spi@27200 { - compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; - reg = <0x027200 0x184>, - <0x027000 0x124>, - <0x11c408 0x004>, - <0x0273a0 0x01c>; - reg-names = "mspi", "bspi", "intr_regs", - "intr_status_reg"; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "spi_lr_fullness_reached", - "spi_lr_session_aborted", - "spi_lr_impatient", - "spi_lr_session_done", - "spi_lr_overhead", - "mspi_done", - "mspi_halted"; - clocks = <&iprocmed>; - clock-names = "iprocmed"; - num-cs = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - xhci: usb@29000 { - compatible = "generic-xhci"; - reg = <0x29000 0x1000>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb3_phy>; - phy-names = "usb3-phy"; - dma-coherent; - status = "disabled"; - }; - - ehci0: usb@2a000 { - compatible = "generic-ehci"; - reg = <0x2a000 0x100>; - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - dma-coherent; - status = "disabled"; - }; - - ohci0: usb@2b000 { - compatible = "generic-ohci"; - reg = <0x2b000 0x100>; - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - dma-coherent; - status = "disabled"; - }; - - crypto@2f000 { - compatible = "brcm,spum-nsp-crypto"; - reg = <0x2f000 0x900>; - mboxes = <&mailbox 0>; - }; - - gpiob: gpio@30000 { - compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio"; - reg = <0x30000 0x50>; - #gpio-cells = <2>; - gpio-controller; - ngpios = <4>; - interrupt-controller; - interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - }; - - pwm: pwm@31000 { - compatible = "brcm,iproc-pwm"; - reg = <0x31000 0x28>; - clocks = <&osc>; - #pwm-cells = <3>; - status = "disabled"; - }; - - rng: rng@33000 { - compatible = "brcm,bcm-nsp-rng"; - reg = <0x33000 0x14>; - }; - - ccbtimer0: timer@34000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x34000 0x1000>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&iprocslow>; - clock-names = "apb_pclk"; - }; - - ccbtimer1: timer@35000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x35000 0x1000>; - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&iprocslow>; - clock-names = "apb_pclk"; - }; - - srab: ethernet-switch@36000 { - compatible = "brcm,nsp-srab"; - reg = <0x36000 0x1000>, - <0x3f308 0x8>, - <0x3f410 0xc>; - reg-names = "srab", "mux_config", "sgmii_config"; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "link_state_p0", - "link_state_p1", - "link_state_p2", - "link_state_p3", - "link_state_p4", - "link_state_p5", - "link_state_p7", - "link_state_p8", - "phy", - "ts", - "imp_sleep_timer_p5", - "imp_sleep_timer_p7", - "imp_sleep_timer_p8"; - status = "disabled"; - - /* ports are defined in board DTS */ - ports { - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - i2c0: i2c@38000 { - compatible = "brcm,iproc-i2c"; - reg = <0x38000 0x50>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <100000>; - dma-coherent; - status = "disabled"; - }; - - watchdog@39000 { - compatible = "arm,sp805", "arm,primecell"; - reg = <0x39000 0x1000>; - interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&iprocslow>, <&iprocslow>; - clock-names = "wdog_clk", "apb_pclk"; - }; - - lcpll0: lcpll0@3f100 { - #clock-cells = <1>; - compatible = "brcm,nsp-lcpll0"; - reg = <0x3f100 0x14>; - clocks = <&osc>; - clock-output-names = "lcpll0", "pcie_phy", "sdio", - "ddr_phy"; - }; - - genpll: genpll@3f140 { - #clock-cells = <1>; - compatible = "brcm,nsp-genpll"; - reg = <0x3f140 0x24>; - clocks = <&osc>; - clock-output-names = "genpll", "phy", "ethernetclk", - "usbclk", "iprocfast", "sata1", - "sata2"; - }; - - pinctrl: pinctrl@3f1c0 { - compatible = "brcm,nsp-pinmux"; - reg = <0x3f1c0 0x04>, - <0x30028 0x04>, - <0x3f408 0x04>; - }; - - thermal: thermal@3f2c0 { - compatible = "brcm,ns-thermal"; - reg = <0x3f2c0 0x10>; - #thermal-sensor-cells = <0>; - }; - - sata_phy: sata_phy@40100 { - compatible = "brcm,iproc-nsp-sata-phy"; - reg = <0x40100 0x340>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - - sata_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - status = "disabled"; - }; - - sata_phy1: sata-phy@1 { - reg = <1>; - #phy-cells = <0>; - status = "disabled"; - }; - }; - - sata: ahci@41000 { - compatible = "brcm,bcm-nsp-ahci"; - reg-names = "ahci", "top-ctrl"; - reg = <0x41000 0x1000>, <0x40020 0x1c>; - interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - dma-coherent; - status = "disabled"; - - sata0: sata-port@0 { - reg = <0>; - phys = <&sata_phy0>; - phy-names = "sata-phy"; - }; - - sata1: sata-port@1 { - reg = <1>; - phys = <&sata_phy1>; - phy-names = "sata-phy"; - }; - }; - - usb3_phy: usb3-phy@104000 { - compatible = "brcm,ns-bx-usb3-phy"; - reg = <0x104000 0x1000>, - <0x032000 0x1000>; - reg-names = "dmp", "ccb-mii"; - #phy-cells = <0>; - status = "disabled"; - }; - }; - - pcie0: pcie@18012000 { - compatible = "brcm,iproc-pcie"; - reg = <0x18012000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; - - linux,pci-domain = <0>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - - /* Note: The HW does not support I/O resources. So, - * only the memory resource range is being specified. - */ - ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>; - - dma-coherent; - status = "disabled"; - - msi-parent = <&msi0>; - msi0: msi-controller { - compatible = "brcm,iproc-msi"; - msi-controller; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; - brcm,pcie-msi-inten; - }; - }; - - pcie1: pcie@18013000 { - compatible = "brcm,iproc-pcie"; - reg = <0x18013000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; - - linux,pci-domain = <1>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - - /* Note: The HW does not support I/O resources. So, - * only the memory resource range is being specified. - */ - ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>; - - dma-coherent; - status = "disabled"; - - msi-parent = <&msi1>; - msi1: msi-controller { - compatible = "brcm,iproc-msi"; - msi-controller; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; - brcm,pcie-msi-inten; - }; - }; - - pcie2: pcie@18014000 { - compatible = "brcm,iproc-pcie"; - reg = <0x18014000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; - - linux,pci-domain = <2>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - - /* Note: The HW does not support I/O resources. So, - * only the memory resource range is being specified. - */ - ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>; - - dma-coherent; - status = "disabled"; - - msi-parent = <&msi2>; - msi2: msi-controller { - compatible = "brcm,iproc-msi"; - msi-controller; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; - brcm,pcie-msi-inten; - }; - }; - - thermal-zones { - cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; - coefficients = <(-556) 418000>; - thermal-sensors = <&thermal>; - - trips { - cpu-crit { - temperature = <125000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - cooling-maps { - }; - }; - }; -}; |