summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/bcm2711-rpi-4-b.dts
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm/bcm2711-rpi-4-b.dts')
-rw-r--r--dts/src/arm/bcm2711-rpi-4-b.dts262
1 files changed, 0 insertions, 262 deletions
diff --git a/dts/src/arm/bcm2711-rpi-4-b.dts b/dts/src/arm/bcm2711-rpi-4-b.dts
deleted file mode 100644
index 72ce80fbf2..0000000000
--- a/dts/src/arm/bcm2711-rpi-4-b.dts
+++ /dev/null
@@ -1,262 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2711.dtsi"
-#include "bcm2711-rpi.dtsi"
-#include "bcm283x-rpi-usb-peripheral.dtsi"
-
-/ {
- compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
- model = "Raspberry Pi 4 Model B";
-
- chosen {
- /* 8250 auxiliary UART instead of pl011 */
- stdout-path = "serial1:115200n8";
- };
-
- leds {
- led-act {
- gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
- };
-
- led-pwr {
- label = "PWR";
- gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- linux,default-trigger = "default-on";
- };
- };
-
- wifi_pwrseq: wifi-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
- };
-
- sd_io_1v8_reg: sd_io_1v8_reg {
- compatible = "regulator-gpio";
- regulator-name = "vdd-sd-io";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-settling-time-us = <5000>;
- gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x1>,
- <3300000 0x0>;
- status = "okay";
- };
-
- sd_vcc_reg: sd_vcc_reg {
- compatible = "regulator-fixed";
- regulator-name = "vcc-sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- enable-active-high;
- gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&ddc0 {
- status = "okay";
-};
-
-&ddc1 {
- status = "okay";
-};
-
-&expgpio {
- gpio-line-names = "BT_ON",
- "WL_ON",
- "PWR_LED_OFF",
- "GLOBAL_RESET",
- "VDD_SD_IO_SEL",
- "CAM_GPIO",
- "SD_PWR_ON",
- "";
-};
-
-&gpio {
- /*
- * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
- * the official GPU firmware DT blob.
- *
- * Legend:
- * "FOO" = GPIO line named "FOO" on the schematic
- * "FOO_N" = GPIO line named "FOO" on schematic, active low
- */
- gpio-line-names = "ID_SDA",
- "ID_SCL",
- "SDA1",
- "SCL1",
- "GPIO_GCLK",
- "GPIO5",
- "GPIO6",
- "SPI_CE1_N",
- "SPI_CE0_N",
- "SPI_MISO",
- "SPI_MOSI",
- "SPI_SCLK",
- "GPIO12",
- "GPIO13",
- /* Serial port */
- "TXD1",
- "RXD1",
- "GPIO16",
- "GPIO17",
- "GPIO18",
- "GPIO19",
- "GPIO20",
- "GPIO21",
- "GPIO22",
- "GPIO23",
- "GPIO24",
- "GPIO25",
- "GPIO26",
- "GPIO27",
- "RGMII_MDIO",
- "RGMIO_MDC",
- /* Used by BT module */
- "CTS0",
- "RTS0",
- "TXD0",
- "RXD0",
- /* Used by Wifi */
- "SD1_CLK",
- "SD1_CMD",
- "SD1_DATA0",
- "SD1_DATA1",
- "SD1_DATA2",
- "SD1_DATA3",
- /* Shared with SPI flash */
- "PWM0_MISO",
- "PWM1_MOSI",
- "STATUS_LED_G_CLK",
- "SPIFLASH_CE_N",
- "SDA0",
- "SCL0",
- "RGMII_RXCLK",
- "RGMII_RXCTL",
- "RGMII_RXD0",
- "RGMII_RXD1",
- "RGMII_RXD2",
- "RGMII_RXD3",
- "RGMII_TXCLK",
- "RGMII_TXCTL",
- "RGMII_TXD0",
- "RGMII_TXD1",
- "RGMII_TXD2",
- "RGMII_TXD3";
-};
-
-&hdmi0 {
- status = "okay";
-};
-
-&hdmi1 {
- status = "okay";
-};
-
-&pixelvalve0 {
- status = "okay";
-};
-
-&pixelvalve1 {
- status = "okay";
-};
-
-&pixelvalve2 {
- status = "okay";
-};
-
-&pixelvalve4 {
- status = "okay";
-};
-
-&pwm1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
- status = "okay";
-};
-
-/* SDHCI is used to control the SDIO for wireless */
-&sdhci {
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_gpio34>;
- bus-width = <4>;
- non-removable;
- mmc-pwrseq = <&wifi_pwrseq>;
- status = "okay";
-
- brcmf: wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- };
-};
-
-/* EMMC2 is used to drive the SD card */
-&emmc2 {
- vqmmc-supply = <&sd_io_1v8_reg>;
- vmmc-supply = <&sd_vcc_reg>;
- broken-cd;
- status = "okay";
-};
-
-&genet {
- phy-handle = <&phy1>;
- phy-mode = "rgmii-rxid";
- status = "okay";
-};
-
-&genet_mdio {
- phy1: ethernet-phy@1 {
- /* No PHY interrupt */
- reg = <0x1>;
- };
-};
-
-&pcie0 {
- pci@0,0 {
- device_type = "pci";
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- reg = <0 0 0 0 0>;
-
- usb@0,0 {
- reg = <0 0 0 0 0>;
- resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
- };
- };
-};
-
-/* uart0 communicates with the BT module */
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
- uart-has-rtscts;
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- max-speed = <2000000>;
- shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
- };
-};
-
-/* uart1 is mapped to the pin header */
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_gpio14>;
- status = "okay";
-};
-
-&vc4 {
- status = "okay";
-};
-
-&vec {
- status = "disabled";
-};