1 files changed, 0 insertions, 159 deletions
diff --git a/dts/src/arm/dra76x.dtsi b/dts/src/arm/dra76x.dtsi
deleted file mode 100644
index bc4ae91cba..0000000000
--- a/dts/src/arm/dra76x.dtsi
+++ /dev/null
@@ -1,159 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "dra74x.dtsi"
-
-/ {
-	compatible = "ti,dra762", "ti,dra7";
-
-	ocp {
-		target-module@42c01900 {
-			compatible = "ti,sysc-dra7-mcan", "ti,sysc";
-			ranges = <0x0 0x42c00000 0x2000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x42c01900 0x4>,
-			      <0x42c01904 0x4>,
-			      <0x42c01908 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET |
-					 SYSC_DRA7_MCAN_ENAWAKEUP)>;
-			ti,syss-mask = <1>;
-			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_ADC_CLKCTRL 0>;
-			clock-names = "fck";
-
-			m_can0: mcan@1a00 {
-				compatible = "bosch,m_can";
-				reg = <0x1a00 0x4000>, <0x0 0x18FC>;
-				reg-names = "m_can", "message_ram";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "int0", "int1";
-				clocks = <&l3_iclk_div>, <&mcan_clk>;
-				clock-names = "hclk", "cclk";
-				bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
-			};
-		};
-	};
-
-};
-
-&l4_per3 {
-	target-module@1b0000 {			/* 0x489b0000, ap 25 34.0 */
-		compatible = "ti,sysc-omap4", "ti,sysc";
-		reg = <0x1b0000 0x4>,
-		      <0x1b0010 0x4>;
-		reg-names = "rev", "sysc";
-		ti,sysc-midle = <SYSC_IDLE_FORCE>,
-				<SYSC_IDLE_NO>;
-		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-				<SYSC_IDLE_NO>;
-		clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
-		clock-names = "fck";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x1b0000 0x10000>;
-
-		cal: cal@0 {
-			compatible = "ti,dra76-cal";
-			reg = <0x0000 0x400>,
-			      <0x0800 0x40>,
-			      <0x0900 0x40>;
-			reg-names = "cal_top",
-				    "cal_rx_core0",
-				    "cal_rx_core1";
-			interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
-			ti,camerrx-control = <&scm_conf 0x6dc>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				csi2_0: port@0 {
-					reg = <0>;
-				};
-				csi2_1: port@1 {
-					reg = <1>;
-				};
-			};
-		};
-	};
-};
-
-&scm_conf_clocks {
-	dpll_gmac_h14x2_ctrl_ck: dpll_gmac_h14x2_ctrl_ck@3fc {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x03fc>;
-		ti,bit-shift=<20>;
-		ti,latch-bit=<26>;
-		assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>;
-		assigned-clock-rates = <80000000>;
-	};
-
-	dpll_gmac_h14x2_ctrl_mux_ck: dpll_gmac_h14x2_ctrl_mux_ck@3fc {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>;
-		reg = <0x3fc>;
-		ti,bit-shift = <29>;
-		ti,latch-bit=<26>;
-		assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
-		assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>;
-	};
-
-	mcan_clk: mcan_clk@3fc {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
-		ti,bit-shift = <27>;
-		reg = <0x3fc>;
-	};
-};
-
-&rtctarget {
-	status = "disabled";
-};
-
-&usb4_tm {
-	status = "disabled";
-};
-
-&mmc3 {
-	/* dra76x is not affected by i887 */
-	max-frequency = <96000000>;
-};
-
-&cpu0_opp_table {
-	opp_plus@1800000000 {
-		opp-hz = /bits/ 64 <1800000000>;
-		opp-microvolt = <1250000 950000 1250000>,
-				<1250000 950000 1250000>;
-		opp-supported-hw = <0xFF 0x08>;
-	};
-};
-
-&opp_supply_mpu {
-	ti,efuse-settings = <
-	/* uV   offset */
-	1060000 0x0
-	1160000 0x4
-	1210000 0x8
-	1250000 0xC
-	>;
-};
-
-&abb_mpu {
-	ti,abb_info = <
-	/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-	1060000		0	0x0	0 0x02000000 0x01F00000
-	1160000		0	0x4	0 0x02000000 0x01F00000
-	1210000		0	0x8	0 0x02000000 0x01F00000
-	1250000		0	0xC	0 0x02000000 0x01F00000
-	>;
-};