diff options
Diffstat (limited to 'dts/src/arm/exynos3250-rinato.dts')
| -rw-r--r-- | dts/src/arm/exynos3250-rinato.dts | 919 |
1 files changed, 0 insertions, 919 deletions
diff --git a/dts/src/arm/exynos3250-rinato.dts b/dts/src/arm/exynos3250-rinato.dts deleted file mode 100644 index 5f7f8fedfb..0000000000 --- a/dts/src/arm/exynos3250-rinato.dts +++ /dev/null @@ -1,919 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Samsung's Exynos3250 based Rinato board device tree source - * - * Copyright (c) 2014 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Device tree source file for Samsung's Rinato board which is based on - * Samsung Exynos3250 SoC. - */ - -/dts-v1/; -#include "exynos3250.dtsi" -#include "exynos4412-ppmu-common.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clock/samsung,s2mps11.h> - -/ { - model = "Samsung Rinato board"; - compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3"; - chassis-type = "watch"; - - aliases { - i2c7 = &i2c_max77836; - }; - - chosen { - stdout-path = &serial_1; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x1ff00000>; - }; - - firmware@205f000 { - compatible = "samsung,secure-firmware"; - reg = <0x0205F000 0x1000>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - power-key { - gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - label = "power key"; - debounce-interval = <10>; - wakeup-source; - }; - }; - - wlan_pwrseq: mshc1-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; - }; - - i2c_max77836: i2c-gpio-0 { - compatible = "i2c-gpio"; - sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - #address-cells = <1>; - #size-cells = <0>; - - max77836: pmic@25 { - compatible = "maxim,max77836"; - interrupt-parent = <&gpx1>; - interrupts = <5 IRQ_TYPE_NONE>; - reg = <0x25>; - wakeup-source; - - muic: max77836-muic { - compatible = "maxim,max77836-muic"; - }; - - regulators { - compatible = "maxim,max77836-regulator"; - safeout_reg: SAFEOUT { - regulator-name = "SAFEOUT"; - }; - - charger_reg: CHARGER { - regulator-name = "CHARGER"; - regulator-min-microamp = <45000>; - regulator-max-microamp = <475000>; - regulator-boot-on; - }; - - motor_reg: LDO1 { - regulator-name = "MOT_2.7V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <2700000>; - }; - - LDO2 { - regulator-name = "UNUSED_LDO2"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3950000>; - }; - }; - - charger { - compatible = "maxim,max77836-charger"; - - maxim,constant-uvolt = <4350000>; - maxim,fast-charge-uamp = <225000>; - maxim,eoc-uamp = <7500>; - maxim,ovp-uvolt = <6500000>; - }; - }; - }; - - haptics { - compatible = "regulator-haptic"; - haptic-supply = <&motor_reg>; - min-microvolt = <1100000>; - max-microvolt = <2700000>; - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - cooling-maps { - map0 { - /* Corresponds to 500MHz */ - cooling-device = <&cpu0 5 5>, - <&cpu1 5 5>; - }; - map1 { - /* Corresponds to 200MHz */ - cooling-device = <&cpu0 8 8>, - <&cpu1 8 8>; - }; - }; - }; - }; -}; - -&adc { - vdd-supply = <&ldo3_reg>; - status = "okay"; - assigned-clocks = <&cmu CLK_SCLK_TSADC>; - assigned-clock-rates = <6000000>; - - thermistor-ap { - compatible = "murata,ncp15wb473"; - pullup-uv = <1800000>; - pullup-ohm = <100000>; - pulldown-ohm = <100000>; - io-channels = <&adc 0>; - }; - - thermistor-battery { - compatible = "murata,ncp15wb473"; - pullup-uv = <1800000>; - pullup-ohm = <100000>; - pulldown-ohm = <100000>; - io-channels = <&adc 1>; - }; -}; - -&bus_dmc { - devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; - vdd-supply = <&buck1_reg>; - status = "okay"; -}; - -&bus_leftbus { - devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; - vdd-supply = <&buck3_reg>; - status = "okay"; -}; - -&bus_rightbus { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&bus_lcd0 { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&bus_fsys { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&bus_mcuisp { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&bus_isp { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&bus_peril { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&bus_mfc { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&cmu { - clocks = <&xusbxti>; -}; - -&cpu0 { - cpu0-supply = <&buck2_reg>; -}; - -&exynos_usbphy { - status = "okay"; - vbus-supply = <&safeout_reg>; -}; - -&hsotg { - vusb_d-supply = <&ldo15_reg>; - vusb_a-supply = <&ldo12_reg>; - dr_mode = "peripheral"; - status = "okay"; -}; - -&dsi_0 { - vddcore-supply = <&ldo6_reg>; - vddio-supply = <&ldo6_reg>; - samsung,burst-clock-frequency = <250000000>; - samsung,esc-clock-frequency = <20000000>; - samsung,pll-clock-frequency = <24000000>; - status = "okay"; - - panel@0 { - compatible = "samsung,s6e63j0x03"; - reg = <0>; - vdd3-supply = <&ldo16_reg>; - vci-supply = <&ldo20_reg>; - reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>; - te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; - }; -}; - -&fimd { - status = "okay"; - - i80-if-timings { - cs-setup = <0>; - wr-setup = <0>; - wr-act = <1>; - wr-hold = <0>; - }; -}; - -&gpu { - mali-supply = <&buck3_reg>; - status = "okay"; -}; - -&i2c_0 { - #address-cells = <1>; - #size-cells = <0>; - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <100000>; - status = "okay"; - - pmic@66 { - compatible = "samsung,s2mps14-pmic"; - interrupt-parent = <&gpx0>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - reg = <0x66>; - wakeup-source; - - s2mps14_osc: clocks { - compatible = "samsung,s2mps14-clk"; - #clock-cells = <1>; - clock-output-names = "s2mps14_ap", "unused", - "s2mps14_bt"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VAP_ALIVE_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo2_reg: LDO2 { - regulator-name = "VAP_M1_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo3_reg: LDO3 { - regulator-name = "VCC_AP_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo4_reg: LDO4 { - regulator-name = "VAP_AVDD_PLL1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo5_reg: LDO5 { - regulator-name = "VAP_PLL_ISO_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo6_reg: LDO6 { - regulator-name = "VAP_VMIPI_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo7_reg: LDO7 { - regulator-name = "VAP_AVDD_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo8_reg: LDO8 { - regulator-name = "VAP_USB_3.0V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo9_reg: LDO9 { - regulator-name = "V_LPDDR_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo10_reg: LDO10 { - regulator-name = "UNUSED_LDO10"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo11_reg: LDO11 { - regulator-name = "V_EMMC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; - }; - - ldo12_reg: LDO12 { - regulator-name = "V_EMMC_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; - }; - - ldo13_reg: LDO13 { - regulator-name = "CAM_AVDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo14_reg: LDO14 { - regulator-name = "UNUSED_LDO14"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo15_reg: LDO15 { - regulator-name = "TSP_AVDD_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo16_reg: LDO16 { - regulator-name = "LCD_VDD_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo17_reg: LDO17 { - regulator-name = "V_IRLED_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo18_reg: LDO18 { - regulator-name = "CAM_AF_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo19_reg: LDO19 { - regulator-name = "TSP_VDD_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo20_reg: LDO20 { - regulator-name = "LCD_VDD_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo21_reg: LDO21 { - regulator-name = "CAM_IO_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo22_reg: LDO22 { - regulator-name = "CAM_DVDD_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo23_reg: LDO23 { - regulator-name = "HRM_VCC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo24_reg: LDO24 { - regulator-name = "HRM_VCC_3.3V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo25_reg: LDO25 { - regulator-name = "UNUSED_LDO25"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck1_reg: BUCK1 { - regulator-name = "VAP_MIF_1.0V"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <900000>; - regulator-always-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck2_reg: BUCK2 { - regulator-name = "VAP_ARM_1.0V"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1150000>; - regulator-always-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck3_reg: BUCK3 { - regulator-name = "VAP_INT3D_1.0V"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck4_reg: BUCK4 { - regulator-name = "VCC_SUB_1.95V"; - regulator-min-microvolt = <1950000>; - regulator-max-microvolt = <1950000>; - regulator-always-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - buck5_reg: BUCK5 { - regulator-name = "VCC_SUB_1.35V"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - }; - }; -}; - -&i2c_1 { - #address-cells = <1>; - #size-cells = <0>; - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <400000>; - status = "okay"; - - fuelgauge@36 { - compatible = "maxim,max77836-battery"; - interrupt-parent = <&gpx1>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - reg = <0x36>; - }; -}; - -&i2s2 { - status = "okay"; -}; - -&jpeg { - status = "okay"; -}; - -&mshc_0 { - broken-cd; - non-removable; - cap-mmc-highspeed; - desc-num = <4>; - mmc-hs200-1_8v; - card-detect-delay = <200>; - vmmc-supply = <&ldo12_reg>; - clock-frequency = <100000000>; - max-frequency = <100000000>; - samsung,dw-mshc-ciu-div = <1>; - samsung,dw-mshc-sdr-timing = <0 1>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; - bus-width = <8>; - status = "okay"; -}; - -&mshc_1 { - status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - - non-removable; - cap-sd-highspeed; - cap-sdio-irq; - keep-power-in-suspend; - samsung,dw-mshc-ciu-div = <1>; - samsung,dw-mshc-sdr-timing = <0 1>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>; - bus-width = <4>; - - mmc-pwrseq = <&wlan_pwrseq>; - - brcmf: wifi@1 { - compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac"; - reg = <1>; - - interrupt-parent = <&gpx1>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wake"; - }; -}; - -&serial_0 { - assigned-clocks = <&cmu CLK_SCLK_UART0>; - assigned-clock-rates = <100000000>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm4330-bt"; - max-speed = <3000000>; - shutdown-gpios = <&gpe0 0 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; - clocks = <&s2mps14_osc S2MPS11_CLK_BT>; - }; -}; - -&serial_1 { - status = "okay"; -}; - -&tmu { - vtmu-supply = <&ldo7_reg>; - status = "okay"; -}; - -&rtc { - clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>; - clock-names = "rtc", "rtc_src"; - status = "okay"; -}; - -&xusbxti { - clock-frequency = <24000000>; -}; - -&pinctrl_0 { - pinctrl-names = "default"; - pinctrl-0 = <&initial0 &sleep0>; - - initial0: initial-state { - PIN_IN(gpa1-4, DOWN, LV1); - PIN_IN(gpa1-5, DOWN, LV1); - - PIN_IN(gpc0-0, DOWN, LV1); - PIN_IN(gpc0-1, DOWN, LV1); - PIN_IN(gpc0-2, DOWN, LV1); - PIN_IN(gpc0-3, DOWN, LV1); - PIN_IN(gpc0-4, DOWN, LV1); - - PIN_IN(gpd0-0, DOWN, LV1); - PIN_IN(gpd0-1, DOWN, LV1); - }; - - sleep0: sleep-state { - PIN_SLP(gpa0-0, INPUT, DOWN); - PIN_SLP(gpa0-1, INPUT, DOWN); - PIN_SLP(gpa0-2, INPUT, DOWN); - PIN_SLP(gpa0-3, INPUT, DOWN); - PIN_SLP(gpa0-4, INPUT, DOWN); - PIN_SLP(gpa0-5, INPUT, DOWN); - PIN_SLP(gpa0-6, INPUT, DOWN); - PIN_SLP(gpa0-7, INPUT, DOWN); - - PIN_SLP(gpa1-0, INPUT, DOWN); - PIN_SLP(gpa1-1, INPUT, DOWN); - PIN_SLP(gpa1-2, INPUT, DOWN); - PIN_SLP(gpa1-3, INPUT, DOWN); - PIN_SLP(gpa1-4, INPUT, DOWN); - PIN_SLP(gpa1-5, INPUT, DOWN); - - PIN_SLP(gpb-0, PREV, NONE); - PIN_SLP(gpb-1, PREV, NONE); - PIN_SLP(gpb-2, PREV, NONE); - PIN_SLP(gpb-3, PREV, NONE); - PIN_SLP(gpb-4, INPUT, DOWN); - PIN_SLP(gpb-5, INPUT, DOWN); - PIN_SLP(gpb-6, INPUT, DOWN); - PIN_SLP(gpb-7, INPUT, DOWN); - - PIN_SLP(gpc0-0, INPUT, DOWN); - PIN_SLP(gpc0-1, INPUT, DOWN); - PIN_SLP(gpc0-2, INPUT, DOWN); - PIN_SLP(gpc0-3, INPUT, DOWN); - PIN_SLP(gpc0-4, INPUT, DOWN); - - PIN_SLP(gpc1-0, INPUT, DOWN); - PIN_SLP(gpc1-1, INPUT, DOWN); - PIN_SLP(gpc1-2, INPUT, DOWN); - PIN_SLP(gpc1-3, INPUT, DOWN); - PIN_SLP(gpc1-4, INPUT, DOWN); - - PIN_SLP(gpd0-0, INPUT, DOWN); - PIN_SLP(gpd0-1, INPUT, DOWN); - PIN_SLP(gpd0-2, INPUT, NONE); - PIN_SLP(gpd0-3, INPUT, NONE); - - PIN_SLP(gpd1-0, INPUT, NONE); - PIN_SLP(gpd1-1, INPUT, NONE); - PIN_SLP(gpd1-2, INPUT, NONE); - PIN_SLP(gpd1-3, INPUT, NONE); - }; -}; - -&pinctrl_1 { - pinctrl-names = "default"; - pinctrl-0 = <&initial1 &sleep1>; - - initial1: initial-state { - PIN_IN(gpe0-6, DOWN, LV1); - PIN_IN(gpe0-7, DOWN, LV1); - - PIN_IN(gpe1-0, DOWN, LV1); - PIN_IN(gpe1-3, DOWN, LV1); - PIN_IN(gpe1-4, DOWN, LV1); - PIN_IN(gpe1-5, DOWN, LV1); - PIN_IN(gpe1-6, DOWN, LV1); - - PIN_IN(gpk2-0, DOWN, LV1); - PIN_IN(gpk2-1, DOWN, LV1); - PIN_IN(gpk2-2, DOWN, LV1); - PIN_IN(gpk2-3, DOWN, LV1); - PIN_IN(gpk2-4, DOWN, LV1); - PIN_IN(gpk2-5, DOWN, LV1); - PIN_IN(gpk2-6, DOWN, LV1); - - PIN_IN(gpm0-0, DOWN, LV1); - PIN_IN(gpm0-1, DOWN, LV1); - PIN_IN(gpm0-2, DOWN, LV1); - PIN_IN(gpm0-3, DOWN, LV1); - PIN_IN(gpm0-4, DOWN, LV1); - PIN_IN(gpm0-5, DOWN, LV1); - PIN_IN(gpm0-6, DOWN, LV1); - PIN_IN(gpm0-7, DOWN, LV1); - - PIN_IN(gpm1-0, DOWN, LV1); - PIN_IN(gpm1-1, DOWN, LV1); - PIN_IN(gpm1-2, DOWN, LV1); - PIN_IN(gpm1-3, DOWN, LV1); - PIN_IN(gpm1-4, DOWN, LV1); - PIN_IN(gpm1-5, DOWN, LV1); - PIN_IN(gpm1-6, DOWN, LV1); - - PIN_IN(gpm2-0, DOWN, LV1); - PIN_IN(gpm2-1, DOWN, LV1); - - PIN_IN(gpm3-0, DOWN, LV1); - PIN_IN(gpm3-1, DOWN, LV1); - PIN_IN(gpm3-2, DOWN, LV1); - PIN_IN(gpm3-3, DOWN, LV1); - PIN_IN(gpm3-4, DOWN, LV1); - - PIN_IN(gpm4-1, DOWN, LV1); - PIN_IN(gpm4-2, DOWN, LV1); - PIN_IN(gpm4-3, DOWN, LV1); - PIN_IN(gpm4-4, DOWN, LV1); - PIN_IN(gpm4-5, DOWN, LV1); - PIN_IN(gpm4-6, DOWN, LV1); - PIN_IN(gpm4-7, DOWN, LV1); - }; - - sleep1: sleep-state { - PIN_SLP(gpe0-0, PREV, NONE); - PIN_SLP(gpe0-1, PREV, NONE); - PIN_SLP(gpe0-2, INPUT, DOWN); - PIN_SLP(gpe0-3, INPUT, UP); - PIN_SLP(gpe0-4, INPUT, DOWN); - PIN_SLP(gpe0-5, INPUT, DOWN); - PIN_SLP(gpe0-6, INPUT, DOWN); - PIN_SLP(gpe0-7, INPUT, DOWN); - - PIN_SLP(gpe1-0, INPUT, DOWN); - PIN_SLP(gpe1-1, PREV, NONE); - PIN_SLP(gpe1-2, INPUT, DOWN); - PIN_SLP(gpe1-3, INPUT, DOWN); - PIN_SLP(gpe1-4, INPUT, DOWN); - PIN_SLP(gpe1-5, INPUT, DOWN); - PIN_SLP(gpe1-6, INPUT, DOWN); - PIN_SLP(gpe1-7, INPUT, NONE); - - PIN_SLP(gpe2-0, INPUT, NONE); - PIN_SLP(gpe2-1, INPUT, NONE); - PIN_SLP(gpe2-2, INPUT, NONE); - - PIN_SLP(gpk0-0, INPUT, DOWN); - PIN_SLP(gpk0-1, INPUT, DOWN); - PIN_SLP(gpk0-2, OUT0, NONE); - PIN_SLP(gpk0-3, INPUT, DOWN); - PIN_SLP(gpk0-4, INPUT, DOWN); - PIN_SLP(gpk0-5, INPUT, DOWN); - PIN_SLP(gpk0-6, INPUT, DOWN); - PIN_SLP(gpk0-7, INPUT, DOWN); - - PIN_SLP(gpk1-0, INPUT, DOWN); - PIN_SLP(gpk1-1, INPUT, DOWN); - PIN_SLP(gpk1-2, INPUT, DOWN); - PIN_SLP(gpk1-3, INPUT, DOWN); - PIN_SLP(gpk1-4, INPUT, DOWN); - PIN_SLP(gpk1-5, INPUT, DOWN); - PIN_SLP(gpk1-6, INPUT, DOWN); - - PIN_SLP(gpk2-0, INPUT, DOWN); - PIN_SLP(gpk2-1, INPUT, DOWN); - PIN_SLP(gpk2-2, INPUT, DOWN); - PIN_SLP(gpk2-3, INPUT, DOWN); - PIN_SLP(gpk2-4, INPUT, DOWN); - PIN_SLP(gpk2-5, INPUT, DOWN); - PIN_SLP(gpk2-6, INPUT, DOWN); - - PIN_SLP(gpl0-0, INPUT, DOWN); - PIN_SLP(gpl0-1, INPUT, DOWN); - PIN_SLP(gpl0-2, INPUT, DOWN); - PIN_SLP(gpl0-3, INPUT, DOWN); - - PIN_SLP(gpm0-0, INPUT, DOWN); - PIN_SLP(gpm0-1, INPUT, DOWN); - PIN_SLP(gpm0-2, INPUT, DOWN); - PIN_SLP(gpm0-3, INPUT, DOWN); - PIN_SLP(gpm0-4, INPUT, DOWN); - PIN_SLP(gpm0-5, INPUT, DOWN); - PIN_SLP(gpm0-6, INPUT, DOWN); - PIN_SLP(gpm0-7, INPUT, DOWN); - - PIN_SLP(gpm1-0, INPUT, DOWN); - PIN_SLP(gpm1-1, INPUT, DOWN); - PIN_SLP(gpm1-2, INPUT, DOWN); - PIN_SLP(gpm1-3, INPUT, DOWN); - PIN_SLP(gpm1-4, INPUT, DOWN); - PIN_SLP(gpm1-5, INPUT, DOWN); - PIN_SLP(gpm1-6, INPUT, DOWN); - - PIN_SLP(gpm2-0, INPUT, DOWN); - PIN_SLP(gpm2-1, INPUT, DOWN); - PIN_SLP(gpm2-2, INPUT, DOWN); - PIN_SLP(gpm2-3, INPUT, DOWN); - PIN_SLP(gpm2-4, INPUT, DOWN); - - PIN_SLP(gpm3-0, INPUT, DOWN); - PIN_SLP(gpm3-1, INPUT, DOWN); - PIN_SLP(gpm3-2, INPUT, DOWN); - PIN_SLP(gpm3-3, INPUT, DOWN); - PIN_SLP(gpm3-4, INPUT, DOWN); - PIN_SLP(gpm3-5, INPUT, DOWN); - PIN_SLP(gpm3-6, INPUT, DOWN); - PIN_SLP(gpm3-7, INPUT, DOWN); - - PIN_SLP(gpm4-0, INPUT, DOWN); - PIN_SLP(gpm4-1, INPUT, DOWN); - PIN_SLP(gpm4-2, INPUT, DOWN); - PIN_SLP(gpm4-3, INPUT, DOWN); - PIN_SLP(gpm4-4, INPUT, DOWN); - PIN_SLP(gpm4-5, INPUT, DOWN); - PIN_SLP(gpm4-6, INPUT, DOWN); - PIN_SLP(gpm4-7, INPUT, DOWN); - }; -}; |