summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/exynos4210-trats.dts
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm/exynos4210-trats.dts')
-rw-r--r--dts/src/arm/exynos4210-trats.dts563
1 files changed, 0 insertions, 563 deletions
diff --git a/dts/src/arm/exynos4210-trats.dts b/dts/src/arm/exynos4210-trats.dts
deleted file mode 100644
index 9c4ff75213..0000000000
--- a/dts/src/arm/exynos4210-trats.dts
+++ /dev/null
@@ -1,563 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4210 based Trats board device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Device tree source file for Samsung's Trats board which is based on
- * Samsung's Exynos4210 SoC.
- */
-
-/dts-v1/;
-#include "exynos4210.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Samsung Trats based on Exynos4210";
- compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
- chassis-type = "handset";
-
- memory@40000000 {
- device_type = "memory";
- reg = <0x40000000 0x10000000
- 0x50000000 0x10000000
- 0x60000000 0x10000000
- 0x70000000 0x10000000>;
- };
-
- chosen {
- bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
- stdout-path = "serial2:115200n8";
- };
-
- vemmc_reg: regulator-0 {
- compatible = "regulator-fixed";
- regulator-name = "VMEM_VDD_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- tsp_reg: regulator-1 {
- compatible = "regulator-fixed";
- regulator-name = "TSP_FIXED_VOLTAGES";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- cam_af_28v_reg: regulator-2 {
- compatible = "regulator-fixed";
- regulator-name = "8M_AF_2.8V_EN";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- cam_io_en_reg: regulator-3 {
- compatible = "regulator-fixed";
- regulator-name = "CAM_IO_EN";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- cam_io_12v_reg: regulator-4 {
- compatible = "regulator-fixed";
- regulator-name = "8M_1.2V_EN";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vt_core_15v_reg: regulator-5 {
- compatible = "regulator-fixed";
- regulator-name = "VT_CORE_1.5V";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- vol-down-key {
- gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
- linux,code = <114>;
- label = "volume down";
- debounce-interval = <10>;
- };
-
- vol-up-key {
- gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
- linux,code = <115>;
- label = "volume up";
- debounce-interval = <10>;
- };
-
- power-key {
- gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
- linux,code = <116>;
- label = "power";
- debounce-interval = <10>;
- wakeup-source;
- };
-
- ok-key {
- gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
- linux,code = <352>;
- label = "ok";
- debounce-interval = <10>;
- };
- };
-
- wlan_pwrseq: sdhci3-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
- };
-
- fixed-rate-clocks {
- xxti {
- compatible = "samsung,clock-xxti";
- clock-frequency = <0>;
- };
-
- xusbxti {
- compatible = "samsung,clock-xusbxti";
- clock-frequency = <24000000>;
- };
-
- pmic_ap_clk: pmic-ap-clk {
- /* Workaround for missing clock on max8997 PMIC */
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
- };
-};
-
-&camera {
- pinctrl-names = "default";
- pinctrl-0 = <>;
- status = "okay";
-};
-
-&cpu0 {
- cpu0-supply = <&varm_breg>;
-};
-
-&cpu_thermal {
- cooling-maps {
- map0 {
- /* Corresponds to 800MHz at freq_table */
- cooling-device = <&cpu0 2 2>, <&cpu1 2 2>;
- };
- map1 {
- /* Corresponds to 200MHz at freq_table */
- cooling-device = <&cpu0 4 4>, <&cpu1 4 4>;
- };
- };
-};
-
-&dsi_0 {
- vddcore-supply = <&vusb_reg>;
- vddio-supply = <&vmipi_reg>;
- samsung,burst-clock-frequency = <500000000>;
- samsung,esc-clock-frequency = <20000000>;
- samsung,pll-clock-frequency = <24000000>;
- status = "okay";
-
- panel@0 {
- reg = <0>;
- compatible = "samsung,s6e8aa0";
- vdd3-supply = <&vcclcd_reg>;
- vci-supply = <&vlcd_reg>;
- reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
- power-on-delay= <50>;
- reset-delay = <100>;
- init-delay = <100>;
- flip-horizontal;
- flip-vertical;
- panel-width-mm = <58>;
- panel-height-mm = <103>;
-
- display-timings {
- timing-0 {
- clock-frequency = <57153600>;
- hactive = <720>;
- vactive = <1280>;
- hfront-porch = <5>;
- hback-porch = <5>;
- hsync-len = <5>;
- vfront-porch = <13>;
- vback-porch = <1>;
- vsync-len = <2>;
- };
- };
- };
-};
-
-&exynos_usbphy {
- status = "okay";
- vbus-supply = <&safe1_sreg>;
-};
-
-&fimc_0 {
- status = "okay";
- assigned-clocks = <&clock CLK_MOUT_FIMC0>,
- <&clock CLK_SCLK_FIMC0>;
- assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
- assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimc_1 {
- status = "okay";
- assigned-clocks = <&clock CLK_MOUT_FIMC1>,
- <&clock CLK_SCLK_FIMC1>;
- assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
- assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimc_2 {
- status = "okay";
- assigned-clocks = <&clock CLK_MOUT_FIMC2>,
- <&clock CLK_SCLK_FIMC2>;
- assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
- assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimc_3 {
- status = "okay";
- assigned-clocks = <&clock CLK_MOUT_FIMC3>,
- <&clock CLK_SCLK_FIMC3>;
- assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
- assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimd {
- status = "okay";
-};
-
-&gpu {
- status = "okay";
-};
-
-&hsotg {
- vusb_d-supply = <&vusb_reg>;
- vusb_a-supply = <&vusbdac_reg>;
- dr_mode = "peripheral";
- status = "okay";
-};
-
-&i2c_3 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-slave-addr = <0x10>;
- samsung,i2c-max-bus-freq = <400000>;
- pinctrl-0 = <&i2c3_bus>;
- pinctrl-names = "default";
- status = "okay";
-
- touchscreen@48 {
- compatible = "melfas,mms114";
- reg = <0x48>;
- interrupt-parent = <&gpx0>;
- interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
- touchscreen-size-x = <720>;
- touchscreen-size-y = <1280>;
- avdd-supply = <&tsp_reg>;
- vdd-supply = <&tsp_reg>;
- };
-};
-
-&i2c_5 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-slave-addr = <0x10>;
- samsung,i2c-max-bus-freq = <100000>;
- pinctrl-0 = <&i2c5_bus>;
- pinctrl-names = "default";
- status = "okay";
-
- pmic@66 {
- compatible = "maxim,max8997-pmic";
-
- reg = <0x66>;
- interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>,
- <&gpx2 3 IRQ_TYPE_EDGE_FALLING>;
-
- max8997,pmic-buck1-uses-gpio-dvs;
- max8997,pmic-buck2-uses-gpio-dvs;
- max8997,pmic-buck5-uses-gpio-dvs;
-
- max8997,pmic-ignore-gpiodvs-side-effect;
- max8997,pmic-buck125-default-dvs-idx = <0>;
-
- max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
- <&gpx0 6 GPIO_ACTIVE_HIGH>,
- <&gpl0 0 GPIO_ACTIVE_HIGH>;
-
- max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
- <1250000>, <1200000>,
- <1150000>, <1100000>,
- <1000000>, <950000>;
-
- max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
- <950000>, <900000>,
- <1100000>, <1000000>,
- <950000>, <900000>;
-
- max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
- <1200000>, <1200000>,
- <1200000>, <1200000>,
- <1200000>, <1200000>;
-
- regulators {
- valive_reg: LDO2 {
- regulator-name = "VALIVE_1.1V_C210";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- vusb_reg: LDO3 {
- regulator-name = "VUSB_1.1V_C210";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- };
-
- vmipi_reg: LDO4 {
- regulator-name = "VMIPI_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vpda_reg: LDO6 {
- regulator-name = "VCC_1.8V_PDA";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vcam_reg: LDO7 {
- regulator-name = "CAM_ISP_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vusbdac_reg: LDO8 {
- regulator-name = "VUSB+VDAC_3.3V_C210";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vccpda_reg: LDO9 {
- regulator-name = "VCC_2.8V_PDA";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- vpll_reg: LDO10 {
- regulator-name = "VPLL_1.1V_C210";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- vtcam_reg: LDO12 {
- regulator-name = "VT_CAM_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vcclcd_reg: LDO13 {
- regulator-name = "VCC_3.3V_LCD";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vlcd_reg: LDO15 {
- regulator-name = "VLCD_2.2V";
- regulator-min-microvolt = <2200000>;
- regulator-max-microvolt = <2200000>;
- };
-
- camsensor_reg: LDO16 {
- regulator-name = "CAM_SENSOR_IO_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- tflash_reg: LDO17 {
- regulator-name = "VTF_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- vddq_reg: LDO21 {
- regulator-name = "VDDQ_M1M2_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- varm_breg: BUCK1 {
- regulator-name = "VARM_1.2V_C210";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- };
-
- vint_breg: BUCK2 {
- regulator-name = "VINT_1.1V_C210";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- camisp_breg: BUCK4 {
- regulator-name = "CAM_ISP_CORE_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- vmem_breg: BUCK5 {
- regulator-name = "VMEM_1.2V_C210";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- vccsub_breg: BUCK7 {
- regulator-name = "VCC_SUB_2.0V";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
- regulator-always-on;
- };
-
- safe1_sreg: ESAFEOUT1 {
- regulator-name = "SAFEOUT1";
- };
-
- safe2_sreg: ESAFEOUT2 {
- regulator-name = "SAFEOUT2";
- regulator-boot-on;
- };
-
- EN32KHZ_AP {
- regulator-name = "EN32KHZ_AP";
- regulator-always-on;
- };
-
- EN32KHZ_CP {
- regulator-name = "EN32KHZ_CP";
- regulator-always-on;
- };
- };
- };
-};
-
-&pinctrl_1 {
- bt_shutdown: bt-shutdown {
- samsung,pins = "gpl1-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- };
-
- bt_host_wakeup: bt-host-wakeup {
- samsung,pins = "gpx2-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- };
-
- bt_device_wakeup: bt-device-wakeup {
- samsung,pins = "gpx3-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- };
-};
-
-&rtc {
- status = "okay";
- clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
- clock-names = "rtc", "rtc_src";
-};
-
-&sdhci_0 {
- bus-width = <8>;
- non-removable;
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
- pinctrl-names = "default";
- vmmc-supply = <&vemmc_reg>;
- status = "okay";
-};
-
-&sdhci_2 {
- bus-width = <4>;
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
- pinctrl-names = "default";
- vmmc-supply = <&tflash_reg>;
- cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&sdhci_3 {
- status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- non-removable;
- bus-width = <4>;
- mmc-pwrseq = <&wlan_pwrseq>;
- vmmc-supply = <&tflash_reg>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
-
- brcmf: wifi@1 {
- compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
- reg = <1>;
-
- interrupt-parent = <&gpx2>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wake";
- };
-};
-
-&serial_0 {
- status = "okay";
- pinctrl-0 = <&uart0_data &uart0_fctl>;
- pinctrl-names = "default";
-
- bluetooth {
- compatible = "brcm,bcm4330-bt";
- pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
- pinctrl-names = "default";
- shutdown-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
- device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&serial_1 {
- status = "okay";
-};
-
-&serial_2 {
- status = "okay";
-};
-
-&serial_3 {
- status = "okay";
-};
-
-&tmu {
- status = "okay";
-};
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-16 18:40:10 +0000