diff options
Diffstat (limited to 'dts/src/arm/exynos4210-universal_c210.dts')
-rw-r--r-- | dts/src/arm/exynos4210-universal_c210.dts | 688 |
1 files changed, 0 insertions, 688 deletions
diff --git a/dts/src/arm/exynos4210-universal_c210.dts b/dts/src/arm/exynos4210-universal_c210.dts deleted file mode 100644 index 138d606d58..0000000000 --- a/dts/src/arm/exynos4210-universal_c210.dts +++ /dev/null @@ -1,688 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Samsung's Exynos4210 based Universal C210 board device tree source - * - * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Device tree source file for Samsung's Universal C210 board which is based on - * Samsung's Exynos4210 rev0 SoC. - */ - -/dts-v1/; -#include "exynos4210.dtsi" -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Samsung Universal C210 based on Exynos4210 rev0"; - compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4"; - chassis-type = "handset"; - - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x10000000 - 0x50000000 0x10000000>; - }; - - chosen { - bootargs = "root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; - stdout-path = "serial2:115200n8"; - }; - - - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <0>; - }; - - xusbxti { - compatible = "samsung,clock-xusbxti"; - clock-frequency = <24000000>; - }; - - pmic_ap_clk: pmic-ap-clk { - /* Workaround for missing clock on PMIC */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - vemmc_reg: voltage-regulator { - compatible = "regulator-fixed"; - regulator-name = "VMEM_VDD_2_8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpe1 3 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - wlan_pwrseq: sdhci3-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpe3 1 GPIO_ACTIVE_LOW>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - vol-up-key { - gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; - linux,code = <115>; - label = "volume up"; - debounce-interval = <1>; - }; - - vol-down-key { - gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; - linux,code = <114>; - label = "volume down"; - debounce-interval = <1>; - }; - - config-key { - gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; - linux,code = <171>; - label = "config"; - debounce-interval = <1>; - wakeup-source; - }; - - camera-key { - gpios = <&gpx2 3 GPIO_ACTIVE_LOW>; - linux,code = <212>; - label = "camera"; - debounce-interval = <1>; - }; - - power-key { - gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; - linux,code = <116>; - label = "power"; - debounce-interval = <1>; - wakeup-source; - }; - - ok-key { - gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; - linux,code = <352>; - label = "ok"; - debounce-interval = <1>; - }; - }; - - tsp_reg: voltage-regulator { - compatible = "regulator-fixed"; - regulator-name = "TSP_2_8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpe2 3 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - spi-3 { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - - sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>; - mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>; - num-chipselects = <1>; - cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>; - - lcd@0 { - compatible = "samsung,ld9040"; - reg = <0>; - vdd3-supply = <&ldo7_reg>; - vci-supply = <&ldo17_reg>; - reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; - spi-max-frequency = <1200000>; - power-on-delay = <10>; - reset-delay = <10>; - panel-width-mm = <90>; - panel-height-mm = <154>; - display-timings { - timing { - clock-frequency = <23492370>; - hactive = <480>; - vactive = <800>; - hback-porch = <16>; - hfront-porch = <16>; - vback-porch = <2>; - vfront-porch = <28>; - hsync-len = <2>; - vsync-len = <1>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <0>; - pixelclk-active = <0>; - }; - }; - port { - lcd_ep: endpoint { - remote-endpoint = <&fimd_dpi_ep>; - }; - }; - }; - }; - - hdmi_en: voltage-regulator-hdmi-5v { - compatible = "regulator-fixed"; - regulator-name = "HDMI_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpe0 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - hdmi_ddc: i2c-ddc { - compatible = "i2c-gpio"; - sda-gpios = <&gpe4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpe4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <100>; - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-0 = <&i2c_ddc_bus>; - pinctrl-names = "default"; - status = "okay"; - }; -}; - -&camera { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <>; -}; - -&cpu0 { - cpu0-supply = <&vdd_arm_reg>; -}; - -&cpu_thermal { - cooling-maps { - map0 { - /* Corresponds to 800MHz */ - cooling-device = <&cpu0 2 2>; - }; - map1 { - /* Corresponds to 200MHz */ - cooling-device = <&cpu0 4 4>; - }; - }; -}; - -&ehci { - status = "okay"; - phys = <&exynos_usbphy 1>; - phy-names = "host"; -}; - -&exynos_usbphy { - status = "okay"; - vbus-supply = <&safeout1_reg>; -}; - -&fimc_0 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC0>, - <&clock CLK_SCLK_FIMC0>; - assigned-clock-parents = <&clock CLK_SCLK_MPLL>; - assigned-clock-rates = <0>, <160000000>; -}; - -&fimc_1 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC1>, - <&clock CLK_SCLK_FIMC1>; - assigned-clock-parents = <&clock CLK_SCLK_MPLL>; - assigned-clock-rates = <0>, <160000000>; -}; - -&fimc_2 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC2>, - <&clock CLK_SCLK_FIMC2>; - assigned-clock-parents = <&clock CLK_SCLK_MPLL>; - assigned-clock-rates = <0>, <160000000>; -}; - -&fimc_3 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC3>, - <&clock CLK_SCLK_FIMC3>; - assigned-clock-parents = <&clock CLK_SCLK_MPLL>; - assigned-clock-rates = <0>, <160000000>; -}; - -&fimd { - pinctrl-0 = <&lcd_clk>, <&lcd_data24>; - pinctrl-names = "default"; - status = "okay"; - samsung,invert-vden; - samsung,invert-vclk; - #address-cells = <1>; - #size-cells = <0>; - port@3 { - reg = <3>; - fimd_dpi_ep: endpoint { - remote-endpoint = <&lcd_ep>; - }; - }; -}; - -&gpu { - mali-supply = <&buck2_reg>; - status = "okay"; -}; - -&hdmi { - hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd>; - hdmi-en-supply = <&hdmi_en>; - vdd-supply = <&ldo3_reg>; - vdd_osc-supply = <&ldo4_reg>; - vdd_pll-supply = <&ldo3_reg>; - ddc = <&hdmi_ddc>; - status = "okay"; -}; - -&hsotg { - vusb_d-supply = <&ldo3_reg>; - vusb_a-supply = <&ldo8_reg>; - dr_mode = "peripheral"; - status = "okay"; -}; - -&i2c_3 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <100000>; - pinctrl-0 = <&i2c3_bus>; - pinctrl-names = "default"; - status = "okay"; - - tsp@4a { - /* TBD: Atmel maXtouch touchscreen */ - reg = <0x4a>; - }; -}; - -&i2c_5 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <100000>; - pinctrl-0 = <&i2c5_bus>; - pinctrl-names = "default"; - status = "okay"; - - vdd_arm_reg: pmic@60 { - compatible = "maxim,max8952"; - reg = <0x60>; - - max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>, - <&gpx0 4 GPIO_ACTIVE_HIGH>; - max8952,default-mode = <0>; - max8952,dvs-mode-microvolt = <1250000>, <1200000>, - <1050000>, <950000>; - max8952,sync-freq = <0>; - max8952,ramp-speed = <0>; - - regulator-name = "VARM_1.2V_C210"; - regulator-min-microvolt = <770000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - pmic@66 { - compatible = "national,lp3974"; - interrupts-extended = <&gpx0 7 0>, <&gpx2 7 0>; - pinctrl-names = "default"; - pinctrl-0 = <&lp3974_irq>; - reg = <0x66>; - - max8998,pmic-buck1-default-dvs-idx = <0>; - max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, - <&gpx0 6 GPIO_ACTIVE_HIGH>; - max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>, - <1100000>, <1000000>; - - max8998,pmic-buck2-default-dvs-idx = <0>; - max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>; - max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>; - - regulators { - ldo2_reg: LDO2 { - regulator-name = "VALIVE_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "VUSB+MIPI_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo4_reg: LDO4 { - regulator-name = "VADC_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo5_reg: LDO5 { - regulator-name = "VTF_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo6_reg: LDO6 { - regulator-name = "LDO6"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - }; - - ldo7_reg: LDO7 { - regulator-name = "VLCD+VMIPI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo8_reg: LDO8 { - regulator-name = "VUSB+VDAC_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo9_reg: LDO9 { - regulator-name = "VCC_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo10_reg: LDO10 { - regulator-name = "VPLL_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo11_reg: LDO11 { - regulator-name = "CAM_AF_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo12_reg: LDO12 { - regulator-name = "PS_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo13_reg: LDO13 { - regulator-name = "VHIC_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo14_reg: LDO14 { - regulator-name = "CAM_I_HOST_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo15_reg: LDO15 { - regulator-name = "CAM_S_DIG+FM33_CORE_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo16_reg: LDO16 { - regulator-name = "CAM_S_ANA_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo17_reg: LDO17 { - regulator-name = "VCC_3.0V_LCD"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - buck1_reg: BUCK1 { - regulator-name = "VINT_1.1V"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "VG3D_1.1V"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "VCC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "VMEM_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - ap32khz_reg: EN32KHz-AP { - regulator-name = "32KHz AP"; - regulator-always-on; - }; - - cp32khz_reg: EN32KHz-CP { - regulator-name = "32KHz CP"; - }; - - vichg_reg: ENVICHG { - regulator-name = "VICHG"; - }; - - safeout1_reg: ESAFEOUT1 { - regulator-name = "SAFEOUT1"; - }; - - safeout2_reg: ESAFEOUT2 { - regulator-name = "SAFEOUT2"; - regulator-boot-on; - }; - }; - }; -}; - -&i2c_8 { - status = "okay"; -}; - -&mct { - compatible = "none"; -}; - -&mdma1 { - /* Use the secure mdma0 */ - status = "disabled"; -}; - -&mixer { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&pinctrl_1 { - bt_shutdown: bt-shutdown-pins { - samsung,pins = "gpe1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - }; - - bt_host_wakeup: bt-host-wakeup-pins { - samsung,pins = "gpx2-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - }; - - bt_device_wakeup: bt-device-wakeup-pins { - samsung,pins = "gpx3-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - }; - - lp3974_irq: lp3974-irq-pins { - samsung,pins = "gpx0-7", "gpx2-7"; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - }; - - hdmi_hpd: hdmi-hpd-pins { - samsung,pins = "gpx3-7"; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - }; -}; - -&pinctrl_0 { - i2c_ddc_bus: i2c-ddc-bus-pins { - samsung,pins = "gpe4-2", "gpe4-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; -}; - -&pwm { - compatible = "samsung,s5p6440-pwm"; - status = "okay"; -}; - -&rtc { - status = "okay"; - clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; - clock-names = "rtc", "rtc_src"; -}; - -&sdhci_0 { - bus-width = <8>; - non-removable; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; - pinctrl-names = "default"; - vmmc-supply = <&vemmc_reg>; - status = "okay"; -}; - -&sdhci_2 { - bus-width = <4>; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; - pinctrl-names = "default"; - vmmc-supply = <&ldo5_reg>; - cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&sdhci_3 { - status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - - non-removable; - bus-width = <4>; - mmc-pwrseq = <&wlan_pwrseq>; - vmmc-supply = <&ldo5_reg>; - - pinctrl-names = "default"; - pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>; - - brcmf: wifi@1 { - compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac"; - reg = <1>; - interrupt-parent = <&gpx2>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wake"; - }; -}; - -&serial_0 { - status = "okay"; - /delete-property/dmas; - /delete-property/dma-names; - pinctrl-0 = <&uart0_data &uart0_fctl>; - pinctrl-names = "default"; - - bluetooth { - compatible = "brcm,bcm4330-bt"; - pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>; - pinctrl-names = "default"; - shutdown-gpios = <&gpe1 4 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; - }; -}; - -&serial_1 { - status = "okay"; - /delete-property/dmas; - /delete-property/dma-names; -}; - -&serial_2 { - status = "okay"; - /delete-property/dmas; - /delete-property/dma-names; -}; - -&serial_3 { - status = "okay"; - /delete-property/dmas; - /delete-property/dma-names; -}; - -&soc { - mdma0: dma-controller@12840000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12840000 0x1000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_MDMA>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - power-domains = <&pd_lcd0>; - }; -}; - -&sysram { - smp-sram@0 { - status = "disabled"; - }; - - smp-sram@5000 { - compatible = "samsung,exynos4210-sysram"; - reg = <0x5000 0x1000>; - }; - - smp-sram@1f000 { - status = "disabled"; - }; -}; |