diff options
Diffstat (limited to 'dts/src/arm/exynos4412-odroid-common.dtsi')
| -rw-r--r-- | dts/src/arm/exynos4412-odroid-common.dtsi | 564 |
1 files changed, 0 insertions, 564 deletions
diff --git a/dts/src/arm/exynos4412-odroid-common.dtsi b/dts/src/arm/exynos4412-odroid-common.dtsi deleted file mode 100644 index 9c39e82e4e..0000000000 --- a/dts/src/arm/exynos4412-odroid-common.dtsi +++ /dev/null @@ -1,564 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards - * device tree source -*/ - -#include <dt-bindings/sound/samsung-i2s.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/clock/maxim,max77686.h> -#include "exynos4412.dtsi" -#include "exynos4412-ppmu-common.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include "exynos-mfc-reserved-memory.dtsi" - -/ { - chosen { - stdout-path = &serial_1; - }; - - firmware@204f000 { - compatible = "samsung,secure-firmware"; - reg = <0x0204F000 0x1000>; - }; - - gpio_keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_power_key>; - - power_key { - gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - label = "power key"; - debounce-interval = <10>; - wakeup-source; - }; - }; - - sound: sound { - compatible = "hardkernel,odroid-xu4-audio"; - - cpu { - sound-dai = <&i2s0 0>; - }; - - codec { - sound-dai = <&hdmi>, <&max98090>; - }; - }; - - emmc_pwrseq: pwrseq { - pinctrl-0 = <&emmc_rstn>; - pinctrl-names = "default"; - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>; - }; - - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <0>; - }; - - xusbxti { - compatible = "samsung,clock-xusbxti"; - clock-frequency = <24000000>; - }; - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - cooling-maps { - cooling_map0: map0 { - /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, - <&cpu2 7 7>, <&cpu3 7 7>; - }; - cooling_map1: map1 { - /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 13 13>, - <&cpu1 13 13>, - <&cpu2 13 13>, - <&cpu3 13 13>; - }; - }; - }; - }; -}; - -&bus_dmc { - devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; - vdd-supply = <&buck1_reg>; - status = "okay"; -}; - -&bus_acp { - devfreq = <&bus_dmc>; - status = "okay"; -}; - -&bus_c2c { - devfreq = <&bus_dmc>; - status = "okay"; -}; - -&bus_leftbus { - devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; - vdd-supply = <&buck3_reg>; - status = "okay"; -}; - -&bus_rightbus { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&bus_display { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&bus_fsys { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&bus_peri { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&bus_mfc { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&camera { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <>; -}; - -&clock { - assigned-clocks = <&clock CLK_FOUT_EPLL>; - assigned-clock-rates = <45158401>; -}; - -&clock_audss { - assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, - <&clock_audss EXYNOS_MOUT_I2S>, - <&clock_audss EXYNOS_DOUT_SRP>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>, - <&clock_audss EXYNOS_DOUT_I2S>; - - assigned-clock-parents = <&clock CLK_FOUT_EPLL>, - <&clock_audss EXYNOS_MOUT_AUDSS>; - - assigned-clock-rates = <0>, <0>, - <196608001>, - <(196608001 / 2)>, - <(196608001 / 8)>; -}; - -&cpu0 { - cpu0-supply = <&buck2_reg>; -}; - -&pinctrl_1 { - gpio_power_key: power_key { - samsung,pins = "gpx1-3"; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - }; - - max77686_irq: max77686-irq { - samsung,pins = "gpx3-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - hdmi_hpd: hdmi-hpd { - samsung,pins = "gpx3-7"; - samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; - }; - - emmc_rstn: emmc-rstn { - samsung,pins = "gpk1-2"; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - }; -}; - -&ehci { - status = "okay"; -}; - -&exynos_usbphy { - status = "okay"; -}; - -&fimc_0 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC0>, - <&clock CLK_SCLK_FIMC0>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; -}; - -&fimc_1 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC1>, - <&clock CLK_SCLK_FIMC1>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; -}; - -&fimc_2 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC2>, - <&clock CLK_SCLK_FIMC2>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; -}; - -&fimc_3 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC3>, - <&clock CLK_SCLK_FIMC3>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; -}; - -&gpu { - mali-supply = <&buck4_reg>; - status = "okay"; -}; - -&hdmi { - hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd>; - vdd-supply = <&ldo8_reg>; - vdd_osc-supply = <&ldo10_reg>; - vdd_pll-supply = <&ldo8_reg>; - ddc = <&i2c_2>; - status = "okay"; -}; - -&hdmicec { - status = "okay"; -}; - -&hsotg { - dr_mode = "peripheral"; - status = "okay"; - vusb_d-supply = <&ldo15_reg>; - vusb_a-supply = <&ldo12_reg>; -}; - -&i2c_0 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <400000>; - status = "okay"; - - usb3503: usb3503@8 { - compatible = "smsc,usb3503"; - reg = <0x08>; - - intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>; - connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; - initial-mode = <1>; - }; - - max77686: pmic@9 { - compatible = "maxim,max77686"; - interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_NONE>; - pinctrl-names = "default"; - pinctrl-0 = <&max77686_irq>; - reg = <0x09>; - #clock-cells = <1>; - - voltage-regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDDQ_M1_2_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "VDDQ_EXT_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: LDO4 { - regulator-name = "VDDQ_MMC2_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-boot-on; - }; - - ldo5_reg: LDO5 { - regulator-name = "VDDQ_MMC1_3_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo6_reg: LDO6 { - regulator-name = "VDD10_MPLL_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo7_reg: LDO7 { - regulator-name = "VDD10_XPLL_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo8_reg: LDO8 { - regulator-name = "VDD10_HDMI_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - ldo10_reg: LDO10 { - regulator-name = "VDDQ_MIPIHSI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo11_reg: LDO11 { - regulator-name = "VDD18_ABB1_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo12_reg: LDO12 { - regulator-name = "VDD33_USB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo13_reg: LDO13 { - regulator-name = "VDDQ_C2C_W_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo14_reg: LDO14 { - regulator-name = "VDD18_ABB0_2_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo15_reg: LDO15 { - regulator-name = "VDD10_HSIC_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo16_reg: LDO16 { - regulator-name = "VDD18_HSIC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo20_reg: LDO20 { - regulator-name = "LDO20_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo21_reg: LDO21 { - regulator-name = "TFLASH_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-boot-on; - }; - - ldo22_reg: LDO22 { - /* - * Only U3 uses it, so let it define the - * constraints - */ - regulator-name = "LDO22"; - regulator-boot-on; - }; - - ldo25_reg: LDO25 { - regulator-name = "VDDQ_LCD_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1050000>; - regulator-always-on; - regulator-boot-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - regulator-microvolt-offset = <50000>; - }; - - buck5_reg: BUCK5 { - regulator-name = "VDDQ_CKEM1_2_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - }; - - buck6_reg: BUCK6 { - regulator-name = "BUCK6_1.35V"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "BUCK7_2.0V"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - buck8_reg: BUCK8 { - /* - * Constraints set by specific board: X, - * X2 and U3. - */ - regulator-name = "BUCK8_2.8V"; - }; - }; - }; -}; - -&i2c_1 { - status = "okay"; - max98090: max98090@10 { - compatible = "maxim,max98090"; - reg = <0x10>; - interrupt-parent = <&gpx0>; - interrupts = <0 IRQ_TYPE_NONE>; - clocks = <&i2s0 CLK_I2S_CDCLK>; - clock-names = "mclk"; - #sound-dai-cells = <0>; - }; -}; - -&i2c_2 { - status = "okay"; -}; - -&i2c_8 { - status = "okay"; -}; - -&i2s0 { - pinctrl-0 = <&i2s0_bus>; - pinctrl-names = "default"; - status = "okay"; - assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; - assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>; -}; - -&mixer { - status = "okay"; -}; - -&mshc_0 { - pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; - pinctrl-names = "default"; - vmmc-supply = <&ldo20_reg>; - mmc-pwrseq = <&emmc_pwrseq>; - status = "okay"; - - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - bus-width = <8>; - cap-mmc-highspeed; -}; - -&rtc { - status = "okay"; - clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; - clock-names = "rtc", "rtc_src"; -}; - -&sdhci_2 { - bus-width = <4>; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - pinctrl-names = "default"; - vmmc-supply = <&ldo21_reg>; - vqmmc-supply = <&ldo4_reg>; - cd-gpios = <&gpk2 2 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&serial_0 { - status = "okay"; -}; - -&serial_1 { - status = "okay"; -}; - -&tmu { - vtmu-supply = <&ldo10_reg>; - status = "okay"; -}; |