diff options
Diffstat (limited to 'dts/src/arm/exynos5250-arndale.dts')
-rw-r--r-- | dts/src/arm/exynos5250-arndale.dts | 634 |
1 files changed, 0 insertions, 634 deletions
diff --git a/dts/src/arm/exynos5250-arndale.dts b/dts/src/arm/exynos5250-arndale.dts deleted file mode 100644 index 3583095fbb..0000000000 --- a/dts/src/arm/exynos5250-arndale.dts +++ /dev/null @@ -1,634 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Samsung's Exynos5250 based Arndale board device tree source - * - * Copyright (c) 2013 Samsung Electronics Co., Ltd. - * http://www.samsung.com - */ - -/dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/clock/samsung,s2mps11.h> -#include <dt-bindings/sound/samsung-i2s.h> -#include "exynos5250.dtsi" - -/ { - model = "Insignal Arndale evaluation board based on Exynos5250"; - compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5"; - - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x80000000>; - }; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - menu { - label = "SW-TACT2"; - gpios = <&gpx1 4 GPIO_ACTIVE_LOW>; - linux,code = <KEY_MENU>; - wakeup-source; - }; - - home { - label = "SW-TACT3"; - gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_HOME>; - wakeup-source; - }; - - up { - label = "SW-TACT4"; - gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; - linux,code = <KEY_UP>; - wakeup-source; - }; - - down { - label = "SW-TACT5"; - gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; - linux,code = <KEY_DOWN>; - wakeup-source; - }; - - back { - label = "SW-TACT6"; - gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; - linux,code = <KEY_BACK>; - wakeup-source; - }; - - wakeup { - label = "SW-TACT7"; - gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WAKEUP>; - wakeup-source; - }; - }; - - panel: panel { - compatible = "boe,hv070wsa-100"; - power-supply = <&vcc_3v3_reg>; - enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>; - port { - panel_ep: endpoint { - remote-endpoint = <&bridge_out_ep>; - }; - }; - }; - - main_dc_reg: regulator-0 { - compatible = "regulator-fixed"; - regulator-name = "MAIN_DC"; - regulator-always-on; - }; - - mmc_reg: regulator-1 { - compatible = "regulator-fixed"; - regulator-name = "VDD_MMC"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - reg_hdmi_en: regulator-2 { - compatible = "regulator-fixed"; - regulator-name = "hdmi-en"; - regulator-always-on; - }; - - vcc_1v2_reg: regulator-3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vcc_1v8_reg: regulator-4 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcc_3v3_reg: regulator-5 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - sound { - compatible = "samsung,arndale-wm1811"; - samsung,audio-cpu = <&i2s0>; - samsung,audio-codec = <&wm1811>; - }; - - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <24000000>; - }; - }; - - // SMSC USB3503 connected in hardware only mode as a PHY - usb_hub: usb-hub { - compatible = "smsc,usb3503a"; - - reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; - connect-gpios = <&gpd1 7 GPIO_ACTIVE_HIGH>; - }; -}; - -&clock { - assigned-clocks = <&clock CLK_FOUT_EPLL>; - assigned-clock-rates = <49152000>; -}; - -&clock_audss { - assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>; - assigned-clock-parents = <&clock CLK_FOUT_EPLL>; -}; - -&cpu0 { - cpu0-supply = <&buck2_reg>; -}; - -&dsi_0 { - vddcore-supply = <&ldo8_reg>; - vddio-supply = <&ldo10_reg>; - samsung,pll-clock-frequency = <24000000>; - samsung,burst-clock-frequency = <320000000>; - samsung,esc-clock-frequency = <10000000>; - status = "okay"; - - bridge@0 { - reg = <0>; - compatible = "toshiba,tc358764"; - vddc-supply = <&vcc_1v2_reg>; - vddio-supply = <&vcc_1v8_reg>; - vddlvds-supply = <&vcc_3v3_reg>; - reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>; - #address-cells = <1>; - #size-cells = <0>; - port@1 { - reg = <1>; - bridge_out_ep: endpoint { - remote-endpoint = <&panel_ep>; - }; - }; - }; -}; - -&fimd { - status = "okay"; -}; - -&hdmi { - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd>; - status = "okay"; - ddc = <&i2c_ddc>; - hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; - vdd_osc-supply = <&ldo10_reg>; - vdd_pll-supply = <&ldo8_reg>; - vdd-supply = <&ldo8_reg>; -}; - -&i2c_0 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <20000>; - samsung,i2c-slave-addr = <0x66>; - - pmic@66 { - compatible = "samsung,s5m8767-pmic"; - reg = <0x66>; - interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&s5m8767_irq>; - wakeup-source; - - vinb1-supply = <&main_dc_reg>; - vinb2-supply = <&main_dc_reg>; - vinb3-supply = <&main_dc_reg>; - vinb4-supply = <&main_dc_reg>; - vinb5-supply = <&main_dc_reg>; - vinb6-supply = <&main_dc_reg>; - vinb7-supply = <&main_dc_reg>; - vinb8-supply = <&main_dc_reg>; - vinb9-supply = <&main_dc_reg>; - - vinl1-supply = <&buck7_reg>; - vinl2-supply = <&buck7_reg>; - vinl3-supply = <&buck7_reg>; - vinl4-supply = <&main_dc_reg>; - vinl5-supply = <&main_dc_reg>; - vinl6-supply = <&main_dc_reg>; - vinl7-supply = <&main_dc_reg>; - vinl8-supply = <&buck8_reg>; - vinl9-supply = <&buck8_reg>; - - s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>, - <&gpd1 1 GPIO_ACTIVE_HIGH>, - <&gpd1 2 GPIO_ACTIVE_HIGH>; - s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>, - <&gpx2 4 GPIO_ACTIVE_HIGH>, - <&gpx2 5 GPIO_ACTIVE_HIGH>; - - s5m8767_osc: clocks { - compatible = "samsung,s5m8767-clk"; - #clock-cells = <1>; - clock-output-names = "s5m8767_ap", "unused1", "unused2"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE_1.0V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDD_28IO_DP_1.35V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo3_reg: LDO3 { - regulator-name = "VDD_COMMON1_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo4_reg: LDO4 { - regulator-name = "VDD_IOPERI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; - }; - - ldo5_reg: LDO5 { - regulator-name = "VDD_EXT_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo6_reg: LDO6 { - regulator-name = "VDD_MPLL_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo7_reg: LDO7 { - regulator-name = "VDD_XPLL_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo8_reg: LDO8 { - regulator-name = "VDD_COMMON2_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo9_reg: LDO9 { - regulator-name = "VDD_33ON_3.0V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - op_mode = <1>; - }; - - ldo10_reg: LDO10 { - regulator-name = "VDD_COMMON3_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo11_reg: LDO11 { - regulator-name = "VDD_ABB2_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo12_reg: LDO12 { - regulator-name = "VDD_USB_3.0V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo13_reg: LDO13 { - regulator-name = "VDDQ_C2C_W_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo14_reg: LDO14 { - regulator-name = "VDD18_ABB0_3_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo15_reg: LDO15 { - regulator-name = "VDD10_COMMON4_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo16_reg: LDO16 { - regulator-name = "VDD18_HSIC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo17_reg: LDO17 { - regulator-name = "VDDQ_MMC2_3_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo18_reg: LDO18 { - regulator-name = "VDD_33ON_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - op_mode = <1>; - }; - - ldo22_reg: LDO22 { - regulator-name = "EXT_33_OFF"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - op_mode = <1>; - }; - - ldo23_reg: LDO23 { - regulator-name = "EXT_28_OFF"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - op_mode = <1>; - }; - - ldo25_reg: LDO25 { - regulator-name = "PVDD_LDO25"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - op_mode = <1>; - }; - - ldo26_reg: LDO26 { - regulator-name = "EXT_18_OFF"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - op_mode = <1>; - }; - - buck1_reg: BUCK1 { - regulator-name = "VDD_MIF"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - buck2_reg: BUCK2 { - regulator-name = "VDD_ARM"; - regulator-min-microvolt = <912500>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - buck3_reg: BUCK3 { - regulator-name = "VDD_INT"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - buck4_reg: BUCK4 { - regulator-name = "VDD_G3D"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - buck5_reg: BUCK5 { - regulator-name = "VDD_MEM_1.35V"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1355000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - buck7_reg: BUCK7 { - regulator-name = "PVDD_BUCK7"; - regulator-always-on; - op_mode = <1>; - }; - - buck8_reg: BUCK8 { - regulator-name = "PVDD_BUCK8"; - regulator-always-on; - op_mode = <1>; - }; - - buck9_reg: BUCK9 { - regulator-name = "VDD_33_OFF_EXT1"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3000000>; - op_mode = <1>; - }; - }; - }; -}; - -&i2c_3 { - status = "okay"; - - wm1811: audio-codec@1a { - compatible = "wlf,wm1811"; - reg = <0x1a>; - clocks = <&i2s0 CLK_I2S_CDCLK>; - clock-names = "MCLK1"; - - AVDD2-supply = <&main_dc_reg>; - CPVDD-supply = <&main_dc_reg>; - DBVDD1-supply = <&main_dc_reg>; - DBVDD2-supply = <&main_dc_reg>; - DBVDD3-supply = <&main_dc_reg>; - LDO1VDD-supply = <&main_dc_reg>; - SPKVDD1-supply = <&main_dc_reg>; - SPKVDD2-supply = <&main_dc_reg>; - - wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>; - wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>; - }; -}; - -&i2c_8 { - status = "okay"; - /* used by HDMI PHY */ - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; -}; - -&i2c_9 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <40000>; -}; - -&i2s0 { - assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; - assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>; - status = "okay"; -}; - -&i2s0_bus { - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>; -}; - -&mali { - mali-supply = <&buck4_reg>; - status = "okay"; -}; - -&mixer { - status = "okay"; -}; - -&mmc_0 { - status = "okay"; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - vmmc-supply = <&mmc_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - bus-width = <8>; - cap-mmc-highspeed; -}; - -&mmc_2 { - status = "okay"; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - vmmc-supply = <&mmc_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - bus-width = <4>; - disable-wp; - cap-sd-highspeed; -}; - -&pinctrl_0 { - s5m8767_irq: s5m8767-irq { - samsung,pins = "gpx3-2"; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - }; -}; - -&rtc { - clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>; - clock-names = "rtc", "rtc_src"; - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&sata_phy { - status = "okay"; - samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; -}; - -&sata_phy_i2c { - status = "okay"; -}; - -&soc { - /* - * For unknown reasons HDMI-DDC does not work with Exynos I2C - * controllers. Lets use software I2C over GPIO pins as a workaround. - */ - i2c_ddc: i2c-10 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_gpio_bus>; - status = "okay"; - compatible = "i2c-gpio"; - sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; -}; |