diff options
Diffstat (limited to 'dts/src/arm/exynos5420-arndale-octa.dts')
| -rw-r--r-- | dts/src/arm/exynos5420-arndale-octa.dts | 837 |
1 files changed, 0 insertions, 837 deletions
diff --git a/dts/src/arm/exynos5420-arndale-octa.dts b/dts/src/arm/exynos5420-arndale-octa.dts deleted file mode 100644 index 946b791faf..0000000000 --- a/dts/src/arm/exynos5420-arndale-octa.dts +++ /dev/null @@ -1,837 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Samsung's Exynos5420 based Arndale Octa board device tree source - * - * Copyright (c) 2013 Samsung Electronics Co., Ltd. - * http://www.samsung.com - */ - -/dts-v1/; -#include "exynos5420.dtsi" -#include "exynos5420-cpus.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/clock/samsung,s2mps11.h> - -/ { - model = "Insignal Arndale Octa evaluation board based on Exynos5420"; - compatible = "insignal,arndale-octa", "samsung,exynos5420", "samsung,exynos5"; - - memory@20000000 { - device_type = "memory"; - reg = <0x20000000 0x80000000>; - }; - - chosen { - stdout-path = "serial3:115200n8"; - }; - - firmware@2073000 { - compatible = "samsung,secure-firmware"; - reg = <0x02073000 0x1000>; - }; - - fixed-rate-clocks { - oscclk { - compatible = "samsung,exynos5420-oscclk"; - clock-frequency = <24000000>; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - wakeup { - label = "SW-TACT1"; - gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WAKEUP>; - wakeup-source; - }; - }; -}; - -&adc { - vdd-supply = <&ldo4_reg>; - status = "okay"; -}; - -&cci { - status = "disabled"; -}; - -&cpu0 { - cpu-supply = <&buck2_reg>; -}; - -&cpu4 { - cpu-supply = <&buck6_reg>; -}; - -&cpu0_thermal { - trips { - cpu0_alert0: cpu-alert-0 { - temperature = <60000>; /* millicelsius */ - hysteresis = <5000>; /* millicelsius */ - type = "passive"; - }; - cpu0_alert1: cpu-alert-1 { - temperature = <80000>; /* millicelsius */ - hysteresis = <10000>; /* millicelsius */ - type = "passive"; - }; - cpu0_alert2: cpu-alert-2 { - temperature = <110000>; /* millicelsius */ - hysteresis = <10000>; /* millicelsius */ - type = "passive"; - }; - cpu0_crit0: cpu-crit-0 { - temperature = <120000>; /* millicelsius */ - hysteresis = <0>; /* millicelsius */ - type = "critical"; - }; - }; - - cooling-maps { - /* - * Reduce the CPU speed by 2 steps, down to: 1600 MHz - * and 1100 MHz. - */ - map0 { - trip = <&cpu0_alert0>; - cooling-device = <&cpu0 0 2>, - <&cpu1 0 2>, - <&cpu2 0 2>, - <&cpu3 0 2>, - <&cpu4 0 2>, - <&cpu5 0 2>, - <&cpu6 0 2>, - <&cpu7 0 2>; - }; - - /* - * Reduce the CPU speed down to 1200 MHz big (6 steps) - * and 800 MHz LITTLE (5 steps). - */ - map1 { - trip = <&cpu0_alert1>; - cooling-device = <&cpu0 3 6>, - <&cpu1 3 6>, - <&cpu2 3 6>, - <&cpu3 3 6>, - <&cpu4 3 5>, - <&cpu5 3 5>, - <&cpu6 3 5>, - <&cpu7 3 5>; - }; - - /* - * Reduce the CPU speed as much as possible, down to 700 MHz - * big (11 steps) and 600 MHz LITTLE (7 steps). - */ - map2 { - trip = <&cpu0_alert2>; - cooling-device = <&cpu0 6 11>, - <&cpu1 6 11>, - <&cpu2 6 11>, - <&cpu3 6 11>, - <&cpu4 5 7>, - <&cpu5 5 7>, - <&cpu6 5 7>, - <&cpu7 5 7>; - }; - }; -}; - -&cpu1_thermal { - trips { - cpu1_alert0: cpu-alert-0 { - temperature = <60000>; /* millicelsius */ - hysteresis = <5000>; /* millicelsius */ - type = "passive"; - }; - cpu1_alert1: cpu-alert-1 { - temperature = <80000>; /* millicelsius */ - hysteresis = <10000>; /* millicelsius */ - type = "passive"; - }; - cpu1_alert2: cpu-alert-2 { - temperature = <110000>; /* millicelsius */ - hysteresis = <10000>; /* millicelsius */ - type = "passive"; - }; - cpu1_crit0: cpu-crit-0 { - temperature = <120000>; /* millicelsius */ - hysteresis = <0>; /* millicelsius */ - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu1_alert0>; - cooling-device = <&cpu0 0 2>, - <&cpu1 0 2>, - <&cpu2 0 2>, - <&cpu3 0 2>, - <&cpu4 0 2>, - <&cpu5 0 2>, - <&cpu6 0 2>, - <&cpu7 0 2>; - }; - - map1 { - trip = <&cpu1_alert1>; - cooling-device = <&cpu0 3 6>, - <&cpu1 3 6>, - <&cpu2 3 6>, - <&cpu3 3 6>, - <&cpu4 3 5>, - <&cpu5 3 5>, - <&cpu6 3 5>, - <&cpu7 3 5>; - }; - - map2 { - trip = <&cpu1_alert2>; - cooling-device = <&cpu0 6 11>, - <&cpu1 6 11>, - <&cpu2 6 11>, - <&cpu3 6 11>, - <&cpu4 5 7>, - <&cpu5 5 7>, - <&cpu6 5 7>, - <&cpu7 5 7>; - }; - }; -}; - -&cpu2_thermal { - trips { - cpu2_alert0: cpu-alert-0 { - temperature = <60000>; /* millicelsius */ - hysteresis = <5000>; /* millicelsius */ - type = "passive"; - }; - cpu2_alert1: cpu-alert-1 { - temperature = <80000>; /* millicelsius */ - hysteresis = <10000>; /* millicelsius */ - type = "passive"; - }; - cpu2_alert2: cpu-alert-2 { - temperature = <110000>; /* millicelsius */ - hysteresis = <10000>; /* millicelsius */ - type = "passive"; - }; - cpu2_crit0: cpu-crit-0 { - temperature = <120000>; /* millicelsius */ - hysteresis = <0>; /* millicelsius */ - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu2_alert0>; - cooling-device = <&cpu0 0 2>, - <&cpu1 0 2>, - <&cpu2 0 2>, - <&cpu3 0 2>, - <&cpu4 0 2>, - <&cpu5 0 2>, - <&cpu6 0 2>, - <&cpu7 0 2>; - }; - - map1 { - trip = <&cpu2_alert1>; - cooling-device = <&cpu0 3 6>, - <&cpu1 3 6>, - <&cpu2 3 6>, - <&cpu3 3 6>, - <&cpu4 3 5>, - <&cpu5 3 5>, - <&cpu6 3 5>, - <&cpu7 3 5>; - }; - - map2 { - trip = <&cpu2_alert2>; - cooling-device = <&cpu0 6 11>, - <&cpu1 6 11>, - <&cpu2 6 11>, - <&cpu3 6 11>, - <&cpu4 6 7>, - <&cpu5 6 7>, - <&cpu6 6 7>, - <&cpu7 6 7>; - }; - }; -}; - -&cpu3_thermal { - trips { - cpu3_alert0: cpu-alert-0 { - temperature = <60000>; /* millicelsius */ - hysteresis = <5000>; /* millicelsius */ - type = "passive"; - }; - cpu3_alert1: cpu-alert-1 { - temperature = <80000>; /* millicelsius */ - hysteresis = <10000>; /* millicelsius */ - type = "passive"; - }; - cpu3_alert2: cpu-alert-2 { - temperature = <110000>; /* millicelsius */ - hysteresis = <10000>; /* millicelsius */ - type = "passive"; - }; - cpu3_crit0: cpu-crit-0 { - temperature = <120000>; /* millicelsius */ - hysteresis = <0>; /* millicelsius */ - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu3_alert0>; - cooling-device = <&cpu0 0 2>, - <&cpu1 0 2>, - <&cpu2 0 2>, - <&cpu3 0 2>, - <&cpu4 0 2>, - <&cpu5 0 2>, - <&cpu6 0 2>, - <&cpu7 0 2>; - }; - - map1 { - trip = <&cpu3_alert1>; - cooling-device = <&cpu0 3 6>, - <&cpu1 3 6>, - <&cpu2 3 6>, - <&cpu3 3 6>, - <&cpu4 3 5>, - <&cpu5 3 5>, - <&cpu6 3 5>, - <&cpu7 3 5>; - }; - - map2 { - trip = <&cpu3_alert2>; - cooling-device = <&cpu0 6 11>, - <&cpu1 6 11>, - <&cpu2 6 11>, - <&cpu3 6 11>, - <&cpu4 5 7>, - <&cpu5 5 7>, - <&cpu6 5 7>, - <&cpu7 5 7>; - }; - }; -}; - -&hdmi { - hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; - vdd_osc-supply = <&ldo7_reg>; - vdd_pll-supply = <&ldo6_reg>; - vdd-supply = <&ldo6_reg>; - ddc = <&i2c_2>; - status = "okay"; -}; - -&hsi2c_4 { - status = "okay"; - - pmic@66 { - compatible = "samsung,s2mps11-pmic"; - reg = <0x66>; - - interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&s2mps11_irq>; - wakeup-source; - - s2mps11_osc: clocks { - compatible = "samsung,s2mps11-clk"; - #clock-cells = <1>; - clock-output-names = "s2mps11_ap", - "s2mps11_cp", "s2mps11_bt"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "PVDD_ALIVE_1V0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "PVDD_APIO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "PVDD_APIO_MMCON_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - /* - * Must be always on, even though there is - * a consumer (mmc_0). Otherwise the board - * does not reboot with vendor U-Boot - * (Linaro for Arndale Octa, v2012.07). - */ - regulator-always-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo4_reg: LDO4 { - regulator-name = "PVDD_ADC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo5_reg: LDO5 { - regulator-name = "PVDD_PLL_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo6_reg: LDO6 { - regulator-name = "PVDD_ANAIP_1V0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - ldo7_reg: LDO7 { - regulator-name = "PVDD_ANAIP_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo8_reg: LDO8 { - regulator-name = "PVDD_ABB_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo9_reg: LDO9 { - regulator-name = "PVDD_USB_3V3"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - ldo10_reg: LDO10 { - regulator-name = "PVDD_PRE_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo11_reg: LDO11 { - regulator-name = "PVDD_USB_1V0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo12_reg: LDO12 { - regulator-name = "PVDD_HSIC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo13_reg: LDO13 { - regulator-name = "PVDD_APIO_MMCOFF_2V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo14_reg: LDO14 { - /* Unused */ - regulator-name = "PVDD_LDO14"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3950000>; - }; - - ldo15_reg: LDO15 { - regulator-name = "PVDD_PERI_2V8"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo16_reg: LDO16 { - regulator-name = "PVDD_PERI_3V3"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo17_reg: LDO17 { - /* Unused */ - regulator-name = "PVDD_LDO17"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3950000>; - }; - - ldo18_reg: LDO18 { - regulator-name = "PVDD_EMMC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - /* - * Must stay in "off" mode during shutdown for - * proper eMMC reset. The "off" mode is in - * fact controlled by LDO18EN. The eMMC does - * not have reset pin connected so the reset - * will be triggered by falling edge of - * LDO18EN. - */ - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo19_reg: LDO19 { - regulator-name = "PVDD_TFLASH_2V8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo20_reg: LDO20 { - regulator-name = "PVDD_BTWIFI_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo21_reg: LDO21 { - regulator-name = "PVDD_CAM1IO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo22_reg: LDO22 { - /* Unused */ - regulator-name = "PVDD_LDO22"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <2375000>; - }; - - ldo23_reg: LDO23 { - regulator-name = "PVDD_MIFS_1V1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo24_reg: LDO24 { - regulator-name = "PVDD_CAM1_AVDD_2V8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo25_reg: LDO25 { - /* Unused */ - regulator-name = "PVDD_LDO25"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3950000>; - }; - - ldo26_reg: LDO26 { - regulator-name = "PVDD_CAM0_AF_2V8"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo27_reg: LDO27 { - regulator-name = "PVDD_G3DS_1V0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo28_reg: LDO28 { - regulator-name = "PVDD_TSP_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo29_reg: LDO29 { - regulator-name = "PVDD_AUDIO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo30_reg: LDO30 { - /* Unused */ - regulator-name = "PVDD_LDO30"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3950000>; - }; - - ldo31_reg: LDO31 { - regulator-name = "PVDD_PERI_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo32_reg: LDO32 { - regulator-name = "PVDD_LCD_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo33_reg: LDO33 { - regulator-name = "PVDD_CAM0IO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo34_reg: LDO34 { - /* Unused */ - regulator-name = "PVDD_LDO34"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3950000>; - }; - - ldo35_reg: LDO35 { - regulator-name = "PVDD_CAM0_DVDD_1V2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo36_reg: LDO36 { - /* Unused */ - regulator-name = "PVDD_LDO36"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3950000>; - }; - - ldo37_reg: LDO37 { - /* Unused */ - regulator-name = "PVDD_LDO37"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3950000>; - }; - - ldo38_reg: LDO38 { - regulator-name = "PVDD_CAM0_AVDD_2V8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - buck1_reg: BUCK1 { - regulator-name = "PVDD_MIF_1V1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck2_reg: BUCK2 { - regulator-name = "PVDD_ARM_1V0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck3_reg: BUCK3 { - regulator-name = "PVDD_INT_1V0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck4_reg: BUCK4 { - regulator-name = "PVDD_G3D_1V0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck5_reg: BUCK5 { - regulator-name = "PVDD_LPDDR3_1V2"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - }; - - buck6_reg: BUCK6 { - regulator-name = "PVDD_KFC_1V0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck7_reg: BUCK7 { - regulator-name = "VIN_LLDO_1V4"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "VIN_MLDO_2V0"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - regulator-always-on; - }; - - buck9_reg: BUCK9 { - regulator-name = "VIN_HLDO_3V5"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3500000>; - regulator-always-on; - }; - - buck10_reg: BUCK10 { - regulator-name = "PVDD_EMMCF_2V8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - /* - * Must stay in "off" mode during shutdown for - * proper eMMC reset. The "off" mode is in - * fact controlled by BUCK10EN. The eMMC does - * not have reset pin connected so the reset - * will be triggered by falling edge of - * BUCK10EN. - */ - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; -}; - -&i2c_2 { - status = "okay"; -}; - -&mixer { - status = "okay"; -}; - -&mmc_0 { - status = "okay"; - non-removable; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; - vmmc-supply = <&ldo18_reg>; - vqmmc-supply = <&ldo3_reg>; - bus-width = <8>; - cap-mmc-highspeed; - mmc-hs200-1_8v; -}; - -&mmc_2 { - status = "okay"; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; - vmmc-supply = <&ldo19_reg>; - vqmmc-supply = <&ldo13_reg>; - bus-width = <4>; - cap-sd-highspeed; - sd-uhs-sdr50; - sd-uhs-sdr104; - sd-uhs-ddr50; -}; - -&pinctrl_0 { - s2mps11_irq: s2mps11-irq-pins { - samsung,pins = "gpx3-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; - }; -}; - -&rtc { - status = "okay"; - clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; - clock-names = "rtc", "rtc_src"; -}; - -&usbdrd_dwc3_1 { - dr_mode = "host"; -}; - -&usbdrd3_0 { - vdd10-supply = <&ldo11_reg>; - vdd33-supply = <&ldo9_reg>; -}; - -&usbdrd3_1 { - vdd10-supply = <&ldo11_reg>; - vdd33-supply = <&ldo9_reg>; -}; |