diff options
Diffstat (limited to 'dts/src/arm/gemini-wbd111.dts')
-rw-r--r-- | dts/src/arm/gemini-wbd111.dts | 183 |
1 files changed, 0 insertions, 183 deletions
diff --git a/dts/src/arm/gemini-wbd111.dts b/dts/src/arm/gemini-wbd111.dts deleted file mode 100644 index 5602ba8f30..0000000000 --- a/dts/src/arm/gemini-wbd111.dts +++ /dev/null @@ -1,183 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree file for Wiliboard WBD-111 - */ - -/dts-v1/; - -#include "gemini.dtsi" -#include <dt-bindings/input/input.h> - -/ { - model = "Wiliboard WBD-111"; - compatible = "wiliboard,wbd111", "cortina,gemini"; - #address-cells = <1>; - #size-cells = <1>; - - memory@0 { - /* 128 MB */ - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8"; - stdout-path = &uart0; - }; - - gpio_keys { - compatible = "gpio-keys"; - - button-setup { - debounce-interval = <100>; - wakeup-source; - linux,code = <KEY_SETUP>; - label = "reset"; - /* Conflict with ICE */ - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-red-l3 { - label = "wbd111:red:L3"; - /* Conflict with TVC and extended parallel flash */ - gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - led-green-l4 { - label = "wbd111:green:L4"; - /* Conflict with TVC and extended parallel flash */ - gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - led-red-l4 { - label = "wbd111:red:L4"; - /* Conflict with TVC and extended parallel flash */ - gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - led-greeb-l3 { - label = "wbd111:green:L3"; - /* Conflict with TVC and extended parallel flash */ - gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - }; - - mdio0: mdio { - compatible = "virtual,mdio-gpio"; - gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ - <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ - #address-cells = <1>; - #size-cells = <0>; - - phy0: ethernet-phy@1 { - reg = <1>; - device_type = "ethernet-phy"; - }; - }; - - soc { - flash@30000000 { - status = "okay"; - /* 8MB of flash */ - reg = <0x30000000 0x00800000>; - - partition@0 { - label = "RedBoot"; - reg = <0x00000000 0x00020000>; - read-only; - }; - partition@20000 { - label = "kernel"; - reg = <0x00020000 0x00100000>; - }; - partition@120000 { - label = "rootfs"; - reg = <0x00120000 0x006a0000>; - }; - partition@7c0000 { - label = "VCTL"; - reg = <0x007c0000 0x00010000>; - read-only; - }; - partition@7d0000 { - label = "cfg"; - reg = <0x007d0000 0x00010000>; - read-only; - }; - partition@7e0000 { - label = "FIS"; - reg = <0x007e0000 0x00010000>; - read-only; - }; - }; - - syscon: syscon@40000000 { - pinctrl { - /* - * gpio0agrp cover line 0-4 - * gpio0bgrp cover line 5 - */ - gpio0_default_pins: pinctrl-gpio0 { - mux { - function = "gpio0"; - groups = "gpio0agrp", - "gpio0bgrp"; - }; - }; - }; - }; - - gpio0: gpio@4d000000 { - pinctrl-names = "default"; - pinctrl-0 = <&gpio0_default_pins>; - }; - - pci@50000000 { - status = "okay"; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = - <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ - <0x4800 0 0 2 &pci_intc 1>, - <0x4800 0 0 3 &pci_intc 2>, - <0x4800 0 0 4 &pci_intc 3>, - <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ - <0x5000 0 0 2 &pci_intc 2>, - <0x5000 0 0 3 &pci_intc 3>, - <0x5000 0 0 4 &pci_intc 0>, - <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ - <0x5800 0 0 2 &pci_intc 3>, - <0x5800 0 0 3 &pci_intc 0>, - <0x5800 0 0 4 &pci_intc 1>, - <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ - <0x6000 0 0 2 &pci_intc 0>, - <0x6000 0 0 3 &pci_intc 1>, - <0x6000 0 0 4 &pci_intc 2>; - }; - - ethernet@60000000 { - status = "okay"; - - ethernet-port@0 { - phy-mode = "rgmii"; - phy-handle = <&phy0>; - }; - ethernet-port@1 { - /* Not used in this platform */ - }; - }; - - usb@68000000 { - status = "okay"; - }; - - usb@69000000 { - status = "okay"; - }; - }; -}; |