diff options
Diffstat (limited to 'dts/src/arm/imx28-cfa10055.dts')
| -rw-r--r-- | dts/src/arm/imx28-cfa10055.dts | 161 |
1 files changed, 0 insertions, 161 deletions
diff --git a/dts/src/arm/imx28-cfa10055.dts b/dts/src/arm/imx28-cfa10055.dts deleted file mode 100644 index d05c370dfc..0000000000 --- a/dts/src/arm/imx28-cfa10055.dts +++ /dev/null @@ -1,161 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2013 Crystalfontz America, Inc. - * Free Electrons - */ - -/* - * The CFA-10055 is an expansion board for the CFA-10036 module and - * CFA-10037, thus we need to include the CFA-10037 DTS. - */ -#include "imx28-cfa10037.dts" - -/ { - model = "Crystalfontz CFA-10055 Board"; - compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28"; - - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - spi2_pins_cfa10055: spi2-cfa10055@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SCK__GPIO_2_16 - MX28_PAD_SSP2_MOSI__GPIO_2_17 - MX28_PAD_SSP2_MISO__GPIO_2_18 - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - lcdif_18bit_pins_cfa10055: lcdif-18bit@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D00__LCD_D0 - MX28_PAD_LCD_D01__LCD_D1 - MX28_PAD_LCD_D02__LCD_D2 - MX28_PAD_LCD_D03__LCD_D3 - MX28_PAD_LCD_D04__LCD_D4 - MX28_PAD_LCD_D05__LCD_D5 - MX28_PAD_LCD_D06__LCD_D6 - MX28_PAD_LCD_D07__LCD_D7 - MX28_PAD_LCD_D08__LCD_D8 - MX28_PAD_LCD_D09__LCD_D9 - MX28_PAD_LCD_D10__LCD_D10 - MX28_PAD_LCD_D11__LCD_D11 - MX28_PAD_LCD_D12__LCD_D12 - MX28_PAD_LCD_D13__LCD_D13 - MX28_PAD_LCD_D14__LCD_D14 - MX28_PAD_LCD_D15__LCD_D15 - MX28_PAD_LCD_D16__LCD_D16 - MX28_PAD_LCD_D17__LCD_D17 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10055: lcdif-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RESET__GPIO_3_30 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_18bit_pins_cfa10055 - &lcdif_pins_cfa10055 - &lcdif_pins_cfa10055_pullup>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <18>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <9216000>; - hactive = <320>; - vactive = <480>; - hback-porch = <2>; - hfront-porch = <2>; - vback-porch = <2>; - vfront-porch = <2>; - hsync-len = <15>; - vsync-len = <15>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - fsl,lradc-touchscreen-wires = <4>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_b>; - status = "okay"; - }; - }; - }; - - spi2 { - compatible = "spi-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_cfa10055>; - status = "okay"; - gpio-sck = <&gpio2 16 0>; - gpio-mosi = <&gpio2 17 0>; - gpio-miso = <&gpio2 18 0>; - cs-gpios = <&gpio3 5 0>; - num-chipselects = <1>; - #address-cells = <1>; - #size-cells = <0>; - - hx8357: hx8357@0 { - compatible = "himax,hx8357b", "himax,hx8357"; - reg = <0>; - spi-max-frequency = <100000>; - spi-cpol; - spi-cpha; - gpios-reset = <&gpio3 30 0>; - }; - }; - - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 3 5000000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - }; -}; |