diff options
Diffstat (limited to 'dts/src/arm/imx28-duckbill.dts')
| -rw-r--r-- | dts/src/arm/imx28-duckbill.dts | 81 |
1 files changed, 56 insertions, 25 deletions
diff --git a/dts/src/arm/imx28-duckbill.dts b/dts/src/arm/imx28-duckbill.dts index ce1a7effba..3e4385d4ed 100644 --- a/dts/src/arm/imx28-duckbill.dts +++ b/dts/src/arm/imx28-duckbill.dts @@ -1,5 +1,6 @@ /* - * Copyright (C) 2013 Michael Heimpold <mhei@heimpold.de> + * Copyright (C) 2013-2014,2016 Michael Heimpold <mhei@heimpold.de> + * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License @@ -10,6 +11,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx28.dtsi" / { @@ -32,6 +34,13 @@ status = "okay"; }; + ssp2: ssp@80014000 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + }; + pinctrl@80018000 { pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; @@ -39,14 +48,24 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */ + MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_reset_pin: mac0-phy-reset@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */ >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; - led_pins_a: led_gpio@0 { + led_pins: leds@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_AUART1_RX__GPIO_3_4 @@ -60,6 +79,22 @@ }; apbx@80040000 { + lradc@80050000 { + status = "okay"; + }; + + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; + }; + duart: serial@80074000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_a>; @@ -75,47 +110,43 @@ ahb@80080000 { usb0: usb@80080000 { status = "okay"; + dr_mode = "peripheral"; }; mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; + pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; phy-supply = <®_3p3v>; phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; + phy-reset-duration = <25>; status = "okay"; }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_3p3v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&led_pins_a>; + pinctrl-0 = <&led_pins>; - status { - label = "duckbill:green:status"; - gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>; - }; - - failure { + status-red { label = "duckbill:red:status"; gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + status-green { + label = "duckbill:green:status"; + gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; }; }; }; |