diff options
Diffstat (limited to 'dts/src/arm/imx28-tx28.dts')
-rw-r--r-- | dts/src/arm/imx28-tx28.dts | 713 |
1 files changed, 0 insertions, 713 deletions
diff --git a/dts/src/arm/imx28-tx28.dts b/dts/src/arm/imx28-tx28.dts deleted file mode 100644 index 6d7b044fec..0000000000 --- a/dts/src/arm/imx28-tx28.dts +++ /dev/null @@ -1,713 +0,0 @@ -/* - * Copyright 2012 Shawn Guo <shawn.guo@linaro.org> - * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "imx28.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "Ka-Ro electronics TX28 module"; - compatible = "karo,tx28", "fsl,imx28"; - - aliases { - can0 = &can0; - can1 = &can1; - display = &display0; - ds1339 = &ds1339; - gpio5 = &gpio5; - lcdif = &lcdif; - lcdif_23bit_pins = &tx28_lcdif_23bit_pins; - lcdif_24bit_pins = &lcdif_24bit_pins_a; - reg_can_xcvr = ®_can_xcvr; - spi_gpio = &spi_gpio; - spi_mxs = &ssp3; - stk5led = &user_led; - usbotg = &usb0; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0>; /* will be filled in by U-Boot */ - }; - - onewire { - compatible = "w1-gpio"; - gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; - status = "disabled"; - }; - - reg_usb0_vbus: regulator-usb0-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb0_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usb1_vbus: regulator-usb1-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_2p5v: regulator-2p5v { - compatible = "regulator-fixed"; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_can_xcvr: regulator-can-xcvr { - compatible = "regulator-fixed"; - regulator-name = "CAN XCVR"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&tx28_flexcan_xcvr_pins>; - }; - - reg_lcd: regulator-lcd-power { - compatible = "regulator-fixed"; - regulator-name = "LCD POWER"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 31 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_lcd_reset: regulator-lcd-reset { - compatible = "regulator-fixed"; - regulator-name = "LCD RESET"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; - startup-delay-us = <300000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - }; - - mclk: clock-mclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <26000000>; - }; - - sound { - compatible = "fsl,imx28-tx28-sgtl5000", - "fsl,mxs-audio-sgtl5000"; - model = "imx28-tx28-sgtl5000"; - saif-controllers = <&saif0 &saif1>; - audio-codec = <&sgtl5000>; - }; - - leds { - compatible = "gpio-leds"; - - user_led: user { - label = "Heartbeat"; - gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 500000>; - /* - * a silly way to create a 1:1 relationship between the - * PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - matrix_keypad: matrix-keypad { - compatible = "gpio-matrix-keypad"; - col-gpios = < - &gpio5 0 GPIO_ACTIVE_HIGH - &gpio5 1 GPIO_ACTIVE_HIGH - &gpio5 2 GPIO_ACTIVE_HIGH - &gpio5 3 GPIO_ACTIVE_HIGH - >; - row-gpios = < - &gpio5 4 GPIO_ACTIVE_HIGH - &gpio5 5 GPIO_ACTIVE_HIGH - &gpio5 6 GPIO_ACTIVE_HIGH - &gpio5 7 GPIO_ACTIVE_HIGH - >; - /* sample keymap */ - linux,keymap = < - 0x00000074 /* row 0, col 0, KEY_POWER */ - 0x00010052 /* row 0, col 1, KEY_KP0 */ - 0x0002004f /* row 0, col 2, KEY_KP1 */ - 0x00030050 /* row 0, col 3, KEY_KP2 */ - 0x01000051 /* row 1, col 0, KEY_KP3 */ - 0x0101004b /* row 1, col 1, KEY_KP4 */ - 0x0102004c /* row 1, col 2, KEY_KP5 */ - 0x0103004d /* row 1, col 3, KEY_KP6 */ - 0x02000047 /* row 2, col 0, KEY_KP7 */ - 0x02010048 /* row 2, col 1, KEY_KP8 */ - 0x02020049 /* row 2, col 2, KEY_KP9 */ - >; - gpio-activelow; - wakeup-source; - debounce-delay-ms = <100>; - col-scan-delay-us = <5000>; - linux,no-autorepeat; - }; - - spi_gpio: spi-gpio { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&tx28_spi_gpio_pins>; - - gpio-sck = <&gpio2 24 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio2 25 GPIO_ACTIVE_HIGH>; - gpio-miso = <&gpio2 26 GPIO_ACTIVE_HIGH>; - num-chipselects = <3>; - cs-gpios = < - &gpio2 27 GPIO_ACTIVE_LOW - &gpio3 8 GPIO_ACTIVE_LOW - &gpio3 9 GPIO_ACTIVE_LOW - >; - /* enable this and disable ssp3 below, if you need full duplex SPI transfer */ - status = "disabled"; - }; -}; - -/* 2nd TX-Std UART - (A)UART1 */ -&auart1 { - pinctrl-names = "default"; - pinctrl-0 = <&auart1_pins_a>; - status = "okay"; -}; - -/* 3rd TX-Std UART - (A)UART3 */ -&auart3 { - pinctrl-names = "default"; - pinctrl-0 = <&auart3_pins_a>; - status = "okay"; -}; - -&can0 { - pinctrl-names = "default"; - pinctrl-0 = <&can0_pins_a>; - xceiver-supply = <®_can_xcvr>; - status = "okay"; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&can1_pins_a>; - xceiver-supply = <®_can_xcvr>; - status = "okay"; -}; - -&digctl { - status = "okay"; -}; - -/* 1st TX-Std UART - (D)UART */ -&duart { - pinctrl-names = "default"; - pinctrl-0 = <&duart_4pins_a>; - status = "okay"; -}; - -&gpmi { - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; - nand-on-flash-bbt; - status = "okay"; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - clock-frequency = <400000>; - status = "okay"; - - sgtl5000: sgtl5000@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - VDDA-supply = <®_2p5v>; - VDDIO-supply = <®_3p3v>; - clocks = <&mclk>; - }; - - gpio5: pca953x@20 { - compatible = "nxp,pca9554"; - reg = <0x20>; - pinctrl-names = "default"; - pinctrl-0 = <&tx28_pca9554_pins>; - interrupt-parent = <&gpio3>; - interrupts = <28 IRQ_TYPE_NONE>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - polytouch: edt-ft5x06@38 { - compatible = "edt,edt-ft5x06"; - reg = <0x38>; - pinctrl-names = "default"; - pinctrl-0 = <&tx28_edt_ft5x06_pins>; - interrupt-parent = <&gpio2>; - interrupts = <5 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; - wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; - wakeup-source; - }; - - touchscreen: tsc2007@48 { - compatible = "ti,tsc2007"; - reg = <0x48>; - pinctrl-names = "default"; - pinctrl-0 = <&tx28_tsc2007_pins>; - interrupt-parent = <&gpio3>; - interrupts = <20 IRQ_TYPE_EDGE_FALLING>; - pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; - ti,x-plate-ohms = /bits/ 16 <660>; - }; - - ds1339: rtc@68 { - compatible = "dallas,ds1339"; - reg = <0x68>; - trickle-resistor-ohms = <250>; - trickle-diode-disable; - }; -}; - -&lcdif { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_sync_pins_a &tx28_lcdif_ctrl_pins>; - lcd-supply = <®_lcd>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - display-timings { - native-mode = <&timing5>; - timing0: timing0 { - panel-name = "VGA"; - clock-frequency = <25175000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - timing1: timing1 { - panel-name = "ETV570"; - clock-frequency = <25175000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - timing2: timing2 { - panel-name = "ET0350"; - clock-frequency = <6500000>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - timing3: timing3 { - panel-name = "ET0430"; - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - timing4: timing4 { - panel-name = "ET0500", "ET0700"; - clock-frequency = <33260000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - timing5: timing5 { - panel-name = "ETQ570"; - clock-frequency = <6400000>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; -}; - -&lradc { - fsl,lradc-touchscreen-wires = <4>; - status = "okay"; -}; - -&mac0 { - phy-mode = "rmii"; - pinctrl-names = "default", "gpio_mode"; - pinctrl-0 = <&mac0_pins_a>; - pinctrl-1 = <&tx28_mac0_pins_gpio>; - status = "okay"; -}; - -&mac1 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - /* not enabled by default */ -}; - -&mxs_rtc { - status = "okay"; -}; - -&ocotp { - status = "okay"; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; - status = "okay"; -}; - -&pinctrl { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_ENET0_RXD3__GPIO_4_10 /* module LED */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA6__GPIO_2_6 /* RESET */ - MX28_PAD_SSP0_DATA5__GPIO_2_5 /* IRQ */ - MX28_PAD_ENET0_RXD2__GPIO_4_9 /* WAKE */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D00__GPIO_1_0 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - tx28_lcdif_23bit_pins: tx28-lcdif-23bit@0 { - reg = <0>; - fsl,pinmux-ids = < - /* LCD_D00 may be used as Flexcan Transceiver Enable on STK5-V5 */ - MX28_PAD_LCD_D01__LCD_D1 - MX28_PAD_LCD_D02__LCD_D2 - MX28_PAD_LCD_D03__LCD_D3 - MX28_PAD_LCD_D04__LCD_D4 - MX28_PAD_LCD_D05__LCD_D5 - MX28_PAD_LCD_D06__LCD_D6 - MX28_PAD_LCD_D07__LCD_D7 - MX28_PAD_LCD_D08__LCD_D8 - MX28_PAD_LCD_D09__LCD_D9 - MX28_PAD_LCD_D10__LCD_D10 - MX28_PAD_LCD_D11__LCD_D11 - MX28_PAD_LCD_D12__LCD_D12 - MX28_PAD_LCD_D13__LCD_D13 - MX28_PAD_LCD_D14__LCD_D14 - MX28_PAD_LCD_D15__LCD_D15 - MX28_PAD_LCD_D16__LCD_D16 - MX28_PAD_LCD_D17__LCD_D17 - MX28_PAD_LCD_D18__LCD_D18 - MX28_PAD_LCD_D19__LCD_D19 - MX28_PAD_LCD_D20__LCD_D20 - MX28_PAD_LCD_D21__LCD_D21 - MX28_PAD_LCD_D22__LCD_D22 - MX28_PAD_LCD_D23__LCD_D23 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_ENABLE__GPIO_1_31 /* Enable */ - MX28_PAD_LCD_RESET__GPIO_3_30 /* Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - tx28_mac0_pins_gpio: tx28-mac0-gpio-pins@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_ENET0_MDC__GPIO_4_0 - MX28_PAD_ENET0_MDIO__GPIO_4_1 - MX28_PAD_ENET0_RX_EN__GPIO_4_2 - MX28_PAD_ENET0_RXD0__GPIO_4_3 - MX28_PAD_ENET0_RXD1__GPIO_4_4 - MX28_PAD_ENET0_TX_EN__GPIO_4_6 - MX28_PAD_ENET0_TXD0__GPIO_4_7 - MX28_PAD_ENET0_TXD1__GPIO_4_8 - MX28_PAD_ENET_CLK__GPIO_4_16 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - tx28_pca9554_pins: tx28-pca9554-pins@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_PWM3__GPIO_3_28 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - tx28_spi_gpio_pins: spi-gpiogrp@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART2_RX__GPIO_3_8 - MX28_PAD_AUART2_TX__GPIO_3_9 - MX28_PAD_SSP3_SCK__GPIO_2_24 - MX28_PAD_SSP3_MOSI__GPIO_2_25 - MX28_PAD_SSP3_MISO__GPIO_2_26 - MX28_PAD_SSP3_SS0__GPIO_2_27 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - tx28_tsc2007_pins: tx28-tsc2007-pins@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - - tx28_usbphy0_pins: tx28-usbphy0-pins@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_CE2N__GPIO_0_18 /* USBOTG_VBUSEN */ - MX28_PAD_GPMI_CE3N__GPIO_0_19 /* USBOTH_OC */ - >; - fsl,drive-strength = <MXS_DRIVE_12mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - tx28_usbphy1_pins: tx28-usbphy1-pins@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SPDIF__GPIO_3_27 /* USBH_VBUSEN */ - MX28_PAD_JTAG_RTCK__GPIO_4_20 /* USBH_OC */ - >; - fsl,drive-strength = <MXS_DRIVE_12mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; -}; - -&saif0 { - pinctrl-names = "default"; - pinctrl-0 = <&saif0_pins_b>; - fsl,saif-master; - status = "okay"; -}; - -&saif1 { - pinctrl-names = "default"; - pinctrl-0 = <&saif1_pins_a>; - status = "okay"; -}; - -&ssp0 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default", "special"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_cd_cfg - &mmc0_sck_cfg>; - bus-width = <4>; - status = "okay"; -}; - -&ssp3 { - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi3_pins_a>; - clock-frequency = <57600000>; - status = "okay"; -}; - -&usb0 { - vbus-supply = <®_usb0_vbus>; - disable-over-current; - dr_mode = "peripheral"; - status = "okay"; -}; - -&usb1 { - vbus-supply = <®_usb1_vbus>; - disable-over-current; - dr_mode = "host"; - status = "okay"; -}; - -&usbphy0 { - pinctrl-names = "default"; - pinctrl-0 = <&tx28_usbphy0_pins>; - phy_type = "utmi"; - status = "okay"; -}; - -&usbphy1 { - pinctrl-names = "default"; - pinctrl-0 = <&tx28_usbphy1_pins>; - phy_type = "utmi"; - status = "okay"; -}; |