diff options
Diffstat (limited to 'dts/src/arm/imx6q-apalis-ixora.dts')
| -rw-r--r-- | dts/src/arm/imx6q-apalis-ixora.dts | 275 |
1 files changed, 0 insertions, 275 deletions
diff --git a/dts/src/arm/imx6q-apalis-ixora.dts b/dts/src/arm/imx6q-apalis-ixora.dts deleted file mode 100644 index 62e72773e5..0000000000 --- a/dts/src/arm/imx6q-apalis-ixora.dts +++ /dev/null @@ -1,275 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/* - * Copyright 2014-2020 Toradex - * Copyright 2012 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - */ - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include "imx6q.dtsi" -#include "imx6qdl-apalis.dtsi" - -/ { - model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board"; - compatible = "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q", - "fsl,imx6q"; - - aliases { - i2c0 = &i2c1; - i2c1 = &i2c3; - i2c2 = &i2c2; - rtc0 = &rtc_i2c; - rtc1 = &snvs_rtc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - wakeup { - label = "Wake-Up"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; - wakeup-source; - }; - }; - - lcd_display: disp0 { - compatible = "fsl,imx-parallel-display"; - #address-cells = <1>; - #size-cells = <0>; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_lcdif>; - status = "okay"; - - port@0 { - reg = <0>; - - lcd_display_in: endpoint { - remote-endpoint = <&ipu1_di1_disp1>; - }; - }; - - port@1 { - reg = <1>; - - lcd_display_out: endpoint { - remote-endpoint = <&lcd_panel_in>; - }; - }; - }; - - panel: panel { - /* - * edt,et057090dhu: EDT 5.7" LCD TFT - * edt,et070080dh6: EDT 7.0" LCD TFT - */ - compatible = "edt,et057090dhu"; - backlight = <&backlight>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_leds_ixora>; - - led4-green { - label = "LED_4_GREEN"; - gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; - }; - - led4-red { - label = "LED_4_RED"; - gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; - }; - - led5-green { - label = "LED_5_GREEN"; - gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; - }; - - led5-red { - label = "LED_5_RED"; - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&backlight { - brightness-levels = <0 127 191 223 239 247 251 255>; - default-brightness-level = <1>; - status = "okay"; -}; - -&can1 { - status = "okay"; -}; - -&can2 { - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ -&i2c1 { - status = "okay"; - - /* - * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, - * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms - */ - touchscreen@4a { - compatible = "atmel,maxtouch"; - reg = <0x4a>; - interrupt-parent = <&gpio6>; - interrupts = <10 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */ - status = "disabled"; - }; - - eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - }; - - /* M41T0M6 real time clock on carrier board */ - rtc_i2c: rtc@68 { - compatible = "st,m41t0"; - reg = <0x68>; - }; -}; - -/* - * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier - * board) - */ -&i2c3 { - status = "okay"; -}; - -&ipu1_di1_disp1 { - remote-endpoint = <&lcd_display_in>; -}; - -&ldb { - status = "okay"; -}; - -&pcie { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reset_moci>; - /* active-high meaning opposite of regular PERST# active-low polarity */ - reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; - reset-gpio-active-high; - status = "okay"; -}; - -&pwm1 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&pwm3 { - status = "okay"; -}; - -&pwm4 { - status = "okay"; -}; - -®_usb_otg_vbus { - status = "okay"; -}; - -®_usb_host_vbus { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&sound_spdif { - status = "okay"; -}; - -&spdif { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&uart4 { - status = "okay"; -}; - -&uart5 { - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_host_vbus>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - status = "okay"; -}; - -/* SD1 */ -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>; - cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&iomuxc { - /* Mux the Apalis GPIOs */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 - &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 - &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6 - &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8 - >; - - pinctrl_leds_ixora: ledsixoragrp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 - MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0 - MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 - >; - }; -}; |