diff options
Diffstat (limited to 'dts/src/arm/imx6q-cm-fx6.dts')
| -rw-r--r-- | dts/src/arm/imx6q-cm-fx6.dts | 43 |
1 files changed, 42 insertions, 1 deletions
diff --git a/dts/src/arm/imx6q-cm-fx6.dts b/dts/src/arm/imx6q-cm-fx6.dts index 66cac5328b..fe6ab0aa34 100644 --- a/dts/src/arm/imx6q-cm-fx6.dts +++ b/dts/src/arm/imx6q-cm-fx6.dts @@ -64,6 +64,14 @@ }; }; + awnh387_pwrseq: pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwrseq>; + compatible = "mmc-pwrseq-sd8787"; + powerdown-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; + }; + reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio { compatible = "regulator-fixed"; regulator-name = "regulator-pcie-power-on-gpio"; @@ -215,7 +223,7 @@ clock-frequency = <100000>; eeprom@50 { - compatible = "at24,24c02"; + compatible = "atmel,24c02"; reg = <0x50>; pagesize = <16>; }; @@ -304,6 +312,13 @@ >; }; + pinctrl_pwrseq: pwrseqgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 @@ -330,6 +345,17 @@ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x130b0 >; }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 + >; + }; }; &pcie { @@ -382,3 +408,18 @@ dr_mode = "otg"; status = "okay"; }; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + mmc-pwrseq = <&awnh387_pwrseq>; + non-removable; + /* + * If the OS probes the Bluetooth AMP function advertised on this bus + * but the firmware in place does not support it, the WiFi/BT module + * gets unresponsive. + * Users who configured their OS properly can enable this node to gain + * WiFi and/or plain Bluetooth support. + */ + status = "disabled"; +}; |