diff options
Diffstat (limited to 'dts/src/arm/imx6qdl-aristainetos2.dtsi')
| -rw-r--r-- | dts/src/arm/imx6qdl-aristainetos2.dtsi | 637 |
1 files changed, 0 insertions, 637 deletions
diff --git a/dts/src/arm/imx6qdl-aristainetos2.dtsi b/dts/src/arm/imx6qdl-aristainetos2.dtsi deleted file mode 100644 index 563bf9d44f..0000000000 --- a/dts/src/arm/imx6qdl-aristainetos2.dtsi +++ /dev/null @@ -1,637 +0,0 @@ -/* - * support for the imx6 based aristainetos2 board - * - * Copyright (C) 2015 Heiko Schocher <hs@denx.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clock/imx6qdl-clock.h> - -/ { - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <7>; - enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>; - }; - - reg_2p5v: regulator-2p5v { - compatible = "regulator-fixed"; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_usbh1_vbus: regulator-usbh1-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_usbotg_vbus: regulator-usbotg-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; -}; - -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux>; - status = "okay"; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; - status = "okay"; -}; - -&can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2>; - status = "okay"; -}; - -&ecspi1 { - cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW - &gpio4 10 GPIO_ACTIVE_LOW - &gpio4 11 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; - status = "okay"; -}; - -&ecspi2 { - cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW &gpio2 27 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi2>; - status = "okay"; -}; - -&ecspi4 { - cs-gpios = <&gpio3 29 GPIO_ACTIVE_LOW &gpio5 2 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi4>; - status = "okay"; - - flash: m25p80@1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "micron,n25q128a11", "jedec,spi-nor"; - spi-max-frequency = <20000000>; - reg = <1>; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - pmic@58 { - compatible = "dlg,da9063"; - reg = <0x58>; - interrupt-parent = <&gpio1>; - interrupts = <04 0x8>; - - regulators { - bcore1 { - regulator-name = "bcore1"; - regulator-always-on = <1>; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <3300000>; - }; - - bcore2 { - regulator-name = "bcore2"; - regulator-always-on = <1>; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <3300000>; - }; - - bpro { - regulator-name = "bpro"; - regulator-always-on = <1>; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <3300000>; - }; - - bperi { - regulator-name = "bperi"; - regulator-always-on = <1>; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <3300000>; - }; - - bmem { - regulator-name = "bmem"; - regulator-always-on = <1>; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo2 { - regulator-name = "ldo2"; - regulator-always-on = <1>; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1800000>; - }; - - ldo3 { - regulator-name = "ldo3"; - regulator-always-on = <1>; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo4 { - regulator-name = "ldo4"; - regulator-always-on = <1>; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo5 { - regulator-name = "ldo5"; - regulator-always-on = <1>; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo6 { - regulator-name = "ldo6"; - regulator-always-on = <1>; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo7 { - regulator-name = "ldo7"; - regulator-always-on = <1>; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo8 { - regulator-name = "ldo8"; - regulator-always-on = <1>; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo9 { - regulator-name = "ldo9"; - regulator-always-on = <1>; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo10 { - regulator-name = "ldo10"; - regulator-always-on = <1>; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo11 { - regulator-name = "ldo11"; - regulator-always-on = <1>; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <3300000>; - }; - - bio { - regulator-name = "bio"; - regulator-always-on = <1>; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - }; - }; - - tmp103: tmp103@71 { - compatible = "ti,tmp103"; - reg = <0x71>; - }; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; -}; - -&i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - status = "okay"; - - expander: tca6416@20 { - compatible = "ti,tca6416"; - reg = <0x20>; - #gpio-cells = <2>; - gpio-controller; - }; - - rtc@68 { - compatible = "dallas,m41t00"; - reg = <0x68>; - }; -}; - -&i2c4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4>; - status = "okay"; - - eeprom@50{ - compatible = "atmel,24c64"; - reg = <0x50>; - }; - - eeprom@57{ - compatible = "atmel,24c64"; - reg = <0x57>; - }; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; - phy-handle = <ðphy>; - phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_LOW>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethernet-phy { - compatible = "ethernet-phy-ieee802.3-c22"; - txd0-skew-ps = <0>; - txd1-skew-ps = <0>; - txd2-skew-ps = <0>; - txd3-skew-ps = <0>; - }; - }; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; - status = "okay"; -}; - -&pcie { - reset-gpio = <&gpio2 16 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&pwm1 { - #pwm-cells = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm1>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - uart-has-rtscts; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - uart-has-rtscts; - status = "okay"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usbh1_vbus>; - dr_mode = "host"; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usbotg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - dr_mode = "host"; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; - no-1-8-v; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; - no-1-8-v; - status = "okay"; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio>; - - pinctrl_audmux: audmux { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0 - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0 - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0 - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0 - >; - }; - - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x100b1 /* SS0# */ - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 /* SS1# */ - MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 /* SS2# */ - >; - }; - - pinctrl_ecspi2: ecspi2grp { - fsl,pins = < - MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 - MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 - MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 - MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 /* SS0# */ - MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x100b1 /* SS1# */ - >; - }; - - pinctrl_ecspi4: ecspi4grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 - MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 - MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */ - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */ - MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */ - >; - }; - - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 - >; - }; - - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0 - MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0 - >; - }; - - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0 - MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0 - >; - }; - - pinctrl_gpio: gpiogrp { - fsl,pins = < - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* led enable */ - MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* LCD power enable */ - MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 /* led yellow */ - MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 /* led red */ - MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b0 /* led green */ - MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 /* led blue */ - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* Profibus IRQ */ - MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 /* FPGA IRQ */ - MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b0 /* spi bus #2 SS driver enable */ - MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 /* RST_LOC# PHY reset input (has pull-down!)*/ - MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1b0b0 /* USB_OTG_ID = GPIO1_24*/ - MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 /* Touchscreen IRQ */ - MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b0b0 /* PCIe reset */ - >; - }; - - pinctrl_gpmi_nand: gpmi-nand { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 - MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; - - pinctrl_i2c4: i2c4grp { - fsl,pins = < - MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1 - >; - }; - - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0 - MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 /* backlight enable */ - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1 - MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 - MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 - >; - }; - - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - >; - }; - - pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus { - fsl,pins = <MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x130b0>; - }; - - pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus { - fsl,pins = <MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x130b0>; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 /* SD1 card detect input */ - MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 /* SD1 write protect input */ - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x71 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x71 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71 - MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0 /* SD2 level shifter output enable */ - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 /* SD2 card detect input */ - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* SD2 write protect input */ - >; - }; -}; |