diff options
Diffstat (limited to 'dts/src/arm/imx6qdl-nit6xlite.dtsi')
| -rw-r--r-- | dts/src/arm/imx6qdl-nit6xlite.dtsi | 582 |
1 files changed, 0 insertions, 582 deletions
diff --git a/dts/src/arm/imx6qdl-nit6xlite.dtsi b/dts/src/arm/imx6qdl-nit6xlite.dtsi deleted file mode 100644 index 0ad4cb4f1e..0000000000 --- a/dts/src/arm/imx6qdl-nit6xlite.dtsi +++ /dev/null @@ -1,582 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR X11 -/* - * Copyright 2015 Boundary Devices, Inc. - */ -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/ { - chosen { - stdout-path = &uart2; - }; - - memory@10000000 { - device_type = "memory"; - reg = <0x10000000 0x20000000>; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_2p5v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - - reg_3p3v: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_usb_otg_vbus: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_wlan_vmmc: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wlan_vmmc>; - regulator-name = "reg_wlan_vmmc"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>; - startup-delay-us = <70000>; - enable-active-high; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - home { - label = "Home"; - gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>; - linux,code = <102>; - }; - - back { - label = "Back"; - gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>; - linux,code = <158>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_leds>; - - j14-pin1 { - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; - retain-state-suspended; - default-state = "off"; - }; - - j14-pin3 { - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - retain-state-suspended; - default-state = "off"; - }; - - j14-pins8-9 { - gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; - retain-state-suspended; - default-state = "off"; - }; - - j46-pin2 { - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; - retain-state-suspended; - default-state = "off"; - }; - - j46-pin3 { - gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; - retain-state-suspended; - default-state = "off"; - }; - }; - - backlight-lcd { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <7>; - power-supply = <®_3p3v>; - status = "okay"; - }; - - backlight_lvds0: backlight-lvds0 { - compatible = "pwm-backlight"; - pwms = <&pwm4 0 5000000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <7>; - power-supply = <®_3p3v>; - status = "okay"; - }; - - panel-lvds0 { - compatible = "hannstar,hsd100pxn1"; - backlight = <&backlight_lvds0>; - - port { - panel_in_lvds0: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - }; - - sound { - compatible = "fsl,imx6dl-nit6xlite-sgtl5000", - "fsl,imx-audio-sgtl5000"; - model = "imx6dl-nit6xlite-sgtl5000"; - ssi-controller = <&ssi1>; - audio-codec = <&codec>; - audio-routing = - "MIC_IN", "Mic Jack", - "Mic Jack", "Mic Bias", - "Headphone Jack", "HP_OUT"; - mux-int-port = <1>; - mux-ext-port = <3>; - }; -}; - -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux>; - status = "okay"; -}; - -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, - <&clks IMX6QDL_CLK_PLL3_USB_OTG>; -}; - -&ecspi1 { - cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; - status = "okay"; - - flash: flash@0 { - compatible = "microchip,sst25vf016b"; - spi-max-frequency = <20000000>; - reg = <0>; - }; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; - phy-handle = <ðphy>; - phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; - interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, - <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; - fsl,err006687-workaround-present; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethernet-phy { - compatible = "ethernet-phy-ieee802.3-c22"; - txen-skew-ps = <0>; - txc-skew-ps = <3000>; - rxdv-skew-ps = <0>; - rxc-skew-ps = <3000>; - rxd0-skew-ps = <0>; - rxd1-skew-ps = <0>; - rxd2-skew-ps = <0>; - rxd3-skew-ps = <0>; - txd0-skew-ps = <0>; - txd1-skew-ps = <0>; - txd2-skew-ps = <0>; - txd3-skew-ps = <0>; - }; - }; -}; - -&hdmi { - ddc-i2c-bus = <&i2c2>; - status = "okay"; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - codec: sgtl5000@a { - compatible = "fsl,sgtl5000"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sgtl5000>; - reg = <0x0a>; - clocks = <&clks IMX6QDL_CLK_CKO>; - VDDA-supply = <®_2p5v>; - VDDIO-supply = <®_3p3v>; - }; -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; -}; - -&i2c3 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - status = "okay"; - - touchscreen@4 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - interrupt-parent = <&gpio1>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; - wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; - }; - - touchscreen@38 { - compatible = "edt,edt-ft5x06"; - reg = <0x38>; - interrupt-parent = <&gpio1>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; - wakeup-source; - }; - - rtc@6f { - compatible = "isil,isl1208"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rtc>; - reg = <0x6f>; - interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_j10>; - pinctrl-1 = <&pinctrl_j28>; - - imx6dl-nit6xlite { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 - >; - }; - - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 - >; - }; - - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - /* Phy reset */ - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 - MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 - >; - }; - - pinctrl_gpio_keys: gpio-keysgrp { - fsl,pins = < - /* Home Button: J14 pin 5 */ - MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 - /* Back Button: J14 pin 7 */ - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 - /* Touch IRQ: J7 pin 4 */ - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 - /* tcs2004 IRQ */ - MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 - /* tsc2004 reset */ - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x0b0b0 - >; - }; - - pinctrl_j10: j10grp { - fsl,pins = < - /* Broadcom WiFi module pins */ - MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 - MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 - MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 - MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 - MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0 - MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 - MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 - >; - }; - - pinctrl_j28: j28grp { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 - >; - }; - - pinctrl_leds: ledsgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0b0b0 - MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x0b0b0 - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x030b0 - MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0b0b0 - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0b0b0 - >; - }; - - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 - >; - }; - - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 - >; - }; - - pinctrl_pwm4: pwm4grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 - >; - }; - - pinctrl_wlan_vmmc: wlan-vmmcgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b0 - >; - }; - - pinctrl_rtc: rtcgrp { - fsl,pins = < - MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b0 - >; - }; - - pinctrl_sgtl5000: sgtl5000grp { - fsl,pins = < - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 - MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 - /* power enable, high active */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 - >; - }; - }; -}; - -&ldb { - status = "okay"; - - lvds-channel@0 { - status = "okay"; - - port@4 { - reg = <4>; - - lvds0_out: endpoint { - remote-endpoint = <&panel_in_lvds0>; - }; - }; - }; -}; - -&pcie { - status = "okay"; -}; - -&pwm1 { - #pwm-cells = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm1>; - status = "okay"; -}; - -&pwm3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm3>; - status = "okay"; -}; - -&pwm4 { - #pwm-cells = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; - status = "okay"; -}; - -&ssi1 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - uart-has-rtscts; - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - bus-width = <4>; - non-removable; - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_wlan_vmmc>; - cap-power-off-card; - keep-power-in-suspend; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; |