diff options
Diffstat (limited to 'dts/src/arm/imx6qdl-phytec-mira.dtsi')
| -rw-r--r-- | dts/src/arm/imx6qdl-phytec-mira.dtsi | 391 |
1 files changed, 0 insertions, 391 deletions
diff --git a/dts/src/arm/imx6qdl-phytec-mira.dtsi b/dts/src/arm/imx6qdl-phytec-mira.dtsi deleted file mode 100644 index 019938562a..0000000000 --- a/dts/src/arm/imx6qdl-phytec-mira.dtsi +++ /dev/null @@ -1,391 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2018 PHYTEC Messtechnik GmbH - * Author: Christian Hemp <c.hemp@phytec.de> - */ - - -/ { - aliases { - rtc0 = &i2c_rtc; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <7>; - power-supply = <®_backlight>; - pwms = <&pwm1 0 5000000>; - status = "okay"; - }; - - gpio_leds: leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpioleds>; - status = "disabled"; - - red { - label = "phyboard-mira:red"; - gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; - }; - - green { - label = "phyboard-mira:green"; - gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; - }; - - blue { - label = "phyboard-mira:blue"; - gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - }; - }; - - reg_backlight: regulator-backlight { - compatible = "regulator-fixed"; - regulator-name = "backlight_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_en_switch: regulator-en-switch { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_en_switch>; - regulator-name = "Enable Switch"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&gpio3 4 GPIO_ACTIVE_HIGH>; - regulator-always-on; - }; - - reg_flexcan1: regulator-flexcan1 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1_en>; - regulator-name = "flexcan1-reg"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_panel: regulator-panel { - compatible = "regulator-fixed"; - regulator-name = "panel-power-supply"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - }; - - reg_pcie: regulator-pcie { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pcie_reg>; - regulator-name = "mPCIe_1V5"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - gpio = <&gpio3 0 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usb_h1_vbus: usb-h1-vbus { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1_vbus>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usbotg_vbus: usbotg-vbus { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg_vbus>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - panel { - compatible = "auo,g104sn02"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_panel_en>; - power-supply = <®_panel>; - enable-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; - backlight = <&backlight>; - - port { - panel_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - }; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; - xceiver-supply = <®_flexcan1>; - status = "disabled"; -}; - -&hdmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hdmicec>; - ddc-i2c-bus = <&i2c2>; - status = "disabled"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - clock-frequency = <400000>; - status = "disabled"; - - stmpe: touchctrl@44 { - compatible = "st,stmpe811"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_stmpe>; - reg = <0x44>; - interrupt-parent = <&gpio7>; - interrupts = <12 IRQ_TYPE_NONE>; - status = "disabled"; - - stmpe_touchscreen { - compatible = "st,stmpe-ts"; - st,sample-time = <4>; - st,mod-12b = <1>; - st,ref-sel = <0>; - st,adc-freq = <1>; - st,ave-ctrl = <1>; - st,touch-det-delay = <2>; - st,settling = <2>; - st,fraction-z = <7>; - st,i-drive = <1>; - }; - }; - - i2c_rtc: rtc@68 { - compatible = "microcrystal,rv4162"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rtc_int>; - reg = <0x68>; - interrupt-parent = <&gpio7>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - clock-frequency = <100000>; - status = "disabled"; -}; - -&ldb { - status = "okay"; - - lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <24>; - status = "disabled"; - - port@4 { - reg = <4>; - - lvds0_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; -}; - -&pcie { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>; - vpcie-supply = <®_pcie>; - status = "disabled"; -}; - -&pwm1 { - #pwm-cells = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - uart-has-rtscts; - status = "disabled"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - disable-over-current; - status = "disabled"; -}; - -&usbotg { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - vbus-supply = <®_usbotg_vbus>; - disable-over-current; - status = "disabled"; -}; - -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>; - no-1-8-v; - status = "disabled"; -}; - -&iomuxc { - pinctrl_panel_en: panelen1grp { - fsl,pins = < - MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0xb0b1 - >; - }; - - pinctrl_en_switch: enswitchgrp { - fsl,pins = < - MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0xb0b1 - >; - }; - - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 - MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 - >; - }; - - pinctrl_flexcan1_en: flexcan1engrp { - fsl,pins = < - MX6QDL_PAD_EIM_A18__GPIO2_IO20 0xb0b1 - >; - }; - - pinctrl_gpioleds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0 - MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0 - MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24 0x1b0b0 - >; - }; - - pinctrl_hdmicec: hdmicecgrp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; - - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_EIM_OE__GPIO2_IO25 0xb0b1 - >; - }; - - pinctrl_pcie_reg: pciereggrp { - fsl,pins = < - MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0xb0b1 - >; - }; - - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 - >; - }; - - pinctrl_rtc_int: rtcintgrp { - fsl,pins = < - MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0 - >; - }; - - pinctrl_stmpe: stmpegrp { - fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_EB3__UART3_CTS_B 0x1b0b1 - MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x1b0b1 - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_usbh1_vbus: usbh1vbusgrp { - fsl,pins = < - MX6QDL_PAD_EIM_A20__GPIO2_IO18 0xb0b1 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - >; - }; - - pinctrl_usbotg_vbus: usbotgvbusgrp { - fsl,pins = < - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0xb0b1 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 - MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb0b1 /* CD */ - >; - }; -}; |