diff options
Diffstat (limited to 'dts/src/arm/imx6qdl-zii-rdu2.dtsi')
| -rw-r--r-- | dts/src/arm/imx6qdl-zii-rdu2.dtsi | 84 |
1 files changed, 62 insertions, 22 deletions
diff --git a/dts/src/arm/imx6qdl-zii-rdu2.dtsi b/dts/src/arm/imx6qdl-zii-rdu2.dtsi index a2a4f33a3e..0075637f9b 100644 --- a/dts/src/arm/imx6qdl-zii-rdu2.dtsi +++ b/dts/src/arm/imx6qdl-zii-rdu2.dtsi @@ -60,18 +60,6 @@ regulator-always-on; }; - reg_5p0v_user_usb: regulator-5p0v-user-usb { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_user_usb>; - vin-supply = <®_5p0v_main>; - regulator-name = "5V_USER_USB"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 GPIO_ACTIVE_LOW>; - startup-delay-us = <1000>; - }; - reg_3p3v_pmic: regulator-3p3v-pmic { compatible = "regulator-fixed"; vin-supply = <®_12p0v>; @@ -331,6 +319,39 @@ }; }; +&gpio3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio3_hog>; + + usb-emulation { + gpio-hog; + gpios = <19 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "usb-emulation"; + }; + + usb-mode1 { + gpio-hog; + gpios = <20 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-mode1"; + }; + + usb-pwr { + gpio-hog; + gpios = <22 GPIO_ACTIVE_LOW>; + output-high; + line-name = "usb-pwr-ctrl-en-n"; + }; + + usb-mode2 { + gpio-hog; + gpios = <23 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-mode2"; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -592,6 +613,16 @@ status = "disabled"; }; + reg_5p0v_user_usb: charger@32 { + compatible = "microchip,ucs1002"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ucs1002_pins>; + reg = <0x32>; + interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>, + <&gpio3 21 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "a_det", "alert"; + }; + hpa1: amp@60 { compatible = "ti,tpa6130a2"; pinctrl-names = "default"; @@ -629,7 +660,7 @@ pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + disable-wp; vmmc-supply = <®_3p3v_sd>; vqmmc-supply = <®_3p3v>; no-1-8-v; @@ -642,7 +673,7 @@ pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <4>; cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + disable-wp; vmmc-supply = <®_3p3v_sd>; vqmmc-supply = <®_3p3v>; no-1-8-v; @@ -776,6 +807,7 @@ &usbh1 { vbus-supply = <®_5p0v_main>; disable-over-current; + maximum-speed = "full-speed"; status = "okay"; }; @@ -936,6 +968,15 @@ >; }; + pinctrl_gpio3_hog: gpio3hoggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 @@ -983,12 +1024,6 @@ >; }; - pinctrl_reg_user_usb: usbotggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x40000038 - >; - }; - pinctrl_rmii_phy_irq: phygrp { fsl,pins = < MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x40010000 @@ -1048,6 +1083,13 @@ >; }; + pinctrl_ucs1002_pins: ucs1002grp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x1b0b0 + >; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX6QDL_PAD_SD2_CMD__SD2_CMD 0x10059 @@ -1056,7 +1098,6 @@ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x40010040 MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x40010040 >; }; @@ -1069,7 +1110,6 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x40010040 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x40010040 >; |