diff options
Diffstat (limited to 'dts/src/arm/imx6ul.dtsi')
| -rw-r--r-- | dts/src/arm/imx6ul.dtsi | 1115 |
1 files changed, 0 insertions, 1115 deletions
diff --git a/dts/src/arm/imx6ul.dtsi b/dts/src/arm/imx6ul.dtsi deleted file mode 100644 index afeec01f65..0000000000 --- a/dts/src/arm/imx6ul.dtsi +++ /dev/null @@ -1,1115 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright 2015 Freescale Semiconductor, Inc. - -#include <dt-bindings/clock/imx6ul-clock.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include "imx6ul-pinfunc.h" - -/ { - #address-cells = <1>; - #size-cells = <1>; - /* - * The decompressor and also some bootloaders rely on a - * pre-existing /chosen node to be available to insert the - * command line and merge other ATAGS info. - */ - chosen {}; - - aliases { - ethernet0 = &fec1; - ethernet1 = &fec2; - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - gpio4 = &gpio5; - i2c0 = &i2c1; - i2c1 = &i2c2; - i2c2 = &i2c3; - i2c3 = &i2c4; - mmc0 = &usdhc1; - mmc1 = &usdhc2; - serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; - serial3 = &uart4; - serial4 = &uart5; - serial5 = &uart6; - serial6 = &uart7; - serial7 = &uart8; - sai1 = &sai1; - sai2 = &sai2; - sai3 = &sai3; - spi0 = &ecspi1; - spi1 = &ecspi2; - spi2 = &ecspi3; - spi3 = &ecspi4; - usb0 = &usbotg1; - usb1 = &usbotg2; - usbphy0 = &usbphy1; - usbphy1 = &usbphy2; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <0>; - clock-frequency = <696000000>; - clock-latency = <61036>; /* two CLK32 periods */ - #cooling-cells = <2>; - operating-points = < - /* kHz uV */ - 696000 1275000 - 528000 1175000 - 396000 1025000 - 198000 950000 - >; - fsl,soc-operating-points = < - /* KHz uV */ - 696000 1275000 - 528000 1175000 - 396000 1175000 - 198000 1175000 - >; - clocks = <&clks IMX6UL_CLK_ARM>, - <&clks IMX6UL_CLK_PLL2_BUS>, - <&clks IMX6UL_CLK_PLL2_PFD2>, - <&clks IMX6UL_CA7_SECONDARY_SEL>, - <&clks IMX6UL_CLK_STEP>, - <&clks IMX6UL_CLK_PLL1_SW>, - <&clks IMX6UL_CLK_PLL1_SYS>; - clock-names = "arm", "pll2_bus", "pll2_pfd2_396m", - "secondary_sel", "step", "pll1_sw", - "pll1_sys"; - arm-supply = <®_arm>; - soc-supply = <®_soc>; - nvmem-cells = <&cpu_speed_grade>; - nvmem-cell-names = "speed_grade"; - }; - }; - - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; - interrupt-parent = <&intc>; - status = "disabled"; - }; - - ckil: clock-cli { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "ckil"; - }; - - osc: clock-osc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "osc"; - }; - - ipp_di0: clock-di0 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - clock-output-names = "ipp_di0"; - }; - - ipp_di1: clock-di1 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - clock-output-names = "ipp_di1"; - }; - - pmu { - compatible = "arm,cortex-a7-pmu"; - interrupt-parent = <&gpc>; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gpc>; - ranges; - - ocram: sram@900000 { - compatible = "mmio-sram"; - reg = <0x00900000 0x20000>; - }; - - intc: interrupt-controller@a01000 { - compatible = "arm,gic-400", "arm,cortex-a7-gic"; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; - #interrupt-cells = <3>; - interrupt-controller; - interrupt-parent = <&intc>; - reg = <0x00a01000 0x1000>, - <0x00a02000 0x2000>, - <0x00a04000 0x2000>, - <0x00a06000 0x2000>; - }; - - dma_apbh: dma-apbh@1804000 { - compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; - reg = <0x01804000 0x2000>; - interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>, - <0 13 IRQ_TYPE_LEVEL_HIGH>, - <0 13 IRQ_TYPE_LEVEL_HIGH>, - <0 13 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; - #dma-cells = <1>; - dma-channels = <4>; - clocks = <&clks IMX6UL_CLK_APBHDMA>; - }; - - gpmi: nand-controller@1806000 { - compatible = "fsl,imx6q-gpmi-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x01806000 0x2000>, <0x01808000 0x2000>; - reg-names = "gpmi-nand", "bch"; - interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "bch"; - clocks = <&clks IMX6UL_CLK_GPMI_IO>, - <&clks IMX6UL_CLK_GPMI_APB>, - <&clks IMX6UL_CLK_GPMI_BCH>, - <&clks IMX6UL_CLK_GPMI_BCH_APB>, - <&clks IMX6UL_CLK_PER_BCH>; - clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", - "gpmi_bch_apb", "per1_bch"; - dmas = <&dma_apbh 0>; - dma-names = "rx-tx"; - status = "disabled"; - }; - - aips1: bus@2000000 { - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x02000000 0x100000>; - ranges; - - spba-bus@2000000 { - compatible = "fsl,spba-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x02000000 0x40000>; - ranges; - - ecspi1: spi@2008000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; - reg = <0x02008000 0x4000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_ECSPI1>, - <&clks IMX6UL_CLK_ECSPI1>; - clock-names = "ipg", "per"; - dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - ecspi2: spi@200c000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; - reg = <0x0200c000 0x4000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_ECSPI2>, - <&clks IMX6UL_CLK_ECSPI2>; - clock-names = "ipg", "per"; - dmas = <&sdma 5 7 1>, <&sdma 6 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - ecspi3: spi@2010000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; - reg = <0x02010000 0x4000>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_ECSPI3>, - <&clks IMX6UL_CLK_ECSPI3>; - clock-names = "ipg", "per"; - dmas = <&sdma 7 7 1>, <&sdma 8 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - ecspi4: spi@2014000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; - reg = <0x02014000 0x4000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_ECSPI4>, - <&clks IMX6UL_CLK_ECSPI4>; - clock-names = "ipg", "per"; - dmas = <&sdma 9 7 1>, <&sdma 10 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart7: serial@2018000 { - compatible = "fsl,imx6ul-uart", - "fsl,imx6q-uart"; - reg = <0x02018000 0x4000>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_UART7_IPG>, - <&clks IMX6UL_CLK_UART7_SERIAL>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart1: serial@2020000 { - compatible = "fsl,imx6ul-uart", - "fsl,imx6q-uart"; - reg = <0x02020000 0x4000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_UART1_IPG>, - <&clks IMX6UL_CLK_UART1_SERIAL>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart8: serial@2024000 { - compatible = "fsl,imx6ul-uart", - "fsl,imx6q-uart"; - reg = <0x02024000 0x4000>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_UART8_IPG>, - <&clks IMX6UL_CLK_UART8_SERIAL>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - sai1: sai@2028000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai"; - reg = <0x02028000 0x4000>; - interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_SAI1_IPG>, - <&clks IMX6UL_CLK_SAI1>, - <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma 35 24 0>, - <&sdma 36 24 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - sai2: sai@202c000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai"; - reg = <0x0202c000 0x4000>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_SAI2_IPG>, - <&clks IMX6UL_CLK_SAI2>, - <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma 37 24 0>, - <&sdma 38 24 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - sai3: sai@2030000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai"; - reg = <0x02030000 0x4000>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_SAI3_IPG>, - <&clks IMX6UL_CLK_SAI3>, - <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma 39 24 0>, - <&sdma 40 24 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - asrc: asrc@2034000 { - compatible = "fsl,imx6ul-asrc", "fsl,imx53-asrc"; - reg = <0x2034000 0x4000>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_ASRC_IPG>, - <&clks IMX6UL_CLK_ASRC_MEM>, <&clks 0>, - <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, - <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, - <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, - <&clks IMX6UL_CLK_SPDIF>, <&clks 0>, <&clks 0>, - <&clks IMX6UL_CLK_SPBA>; - clock-names = "mem", "ipg", "asrck_0", - "asrck_1", "asrck_2", "asrck_3", "asrck_4", - "asrck_5", "asrck_6", "asrck_7", "asrck_8", - "asrck_9", "asrck_a", "asrck_b", "asrck_c", - "asrck_d", "asrck_e", "asrck_f", "spba"; - dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>, - <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>; - dma-names = "rxa", "rxb", "rxc", - "txa", "txb", "txc"; - fsl,asrc-rate = <48000>; - fsl,asrc-width = <16>; - status = "okay"; - }; - }; - - tsc: tsc@2040000 { - compatible = "fsl,imx6ul-tsc"; - reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_IPG>, - <&clks IMX6UL_CLK_ADC2>; - clock-names = "tsc", "adc"; - status = "disabled"; - }; - - pwm1: pwm@2080000 { - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; - reg = <0x02080000 0x4000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_PWM1>, - <&clks IMX6UL_CLK_PWM1>; - clock-names = "ipg", "per"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm2: pwm@2084000 { - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; - reg = <0x02084000 0x4000>; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_PWM2>, - <&clks IMX6UL_CLK_PWM2>; - clock-names = "ipg", "per"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm3: pwm@2088000 { - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; - reg = <0x02088000 0x4000>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_PWM3>, - <&clks IMX6UL_CLK_PWM3>; - clock-names = "ipg", "per"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm4: pwm@208c000 { - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; - reg = <0x0208c000 0x4000>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_PWM4>, - <&clks IMX6UL_CLK_PWM4>; - clock-names = "ipg", "per"; - #pwm-cells = <3>; - status = "disabled"; - }; - - can1: can@2090000 { - compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; - reg = <0x02090000 0x4000>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_CAN1_IPG>, - <&clks IMX6UL_CLK_CAN1_SERIAL>; - clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 1>; - status = "disabled"; - }; - - can2: can@2094000 { - compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; - reg = <0x02094000 0x4000>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_CAN2_IPG>, - <&clks IMX6UL_CLK_CAN2_SERIAL>; - clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 2>; - status = "disabled"; - }; - - gpt1: timer@2098000 { - compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; - reg = <0x02098000 0x4000>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_GPT1_BUS>, - <&clks IMX6UL_CLK_GPT1_SERIAL>; - clock-names = "ipg", "per"; - }; - - gpio1: gpio@209c000 { - compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; - reg = <0x0209c000 0x4000>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_GPIO1>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 23 10>, <&iomuxc 10 17 6>, - <&iomuxc 16 33 16>; - }; - - gpio2: gpio@20a0000 { - compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; - reg = <0x020a0000 0x4000>; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_GPIO2>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 49 16>, <&iomuxc 16 111 6>; - }; - - gpio3: gpio@20a4000 { - compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; - reg = <0x020a4000 0x4000>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_GPIO3>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 65 29>; - }; - - gpio4: gpio@20a8000 { - compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; - reg = <0x020a8000 0x4000>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_GPIO4>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>; - }; - - gpio5: gpio@20ac000 { - compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; - reg = <0x020ac000 0x4000>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_GPIO5>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 7 10>, <&iomuxc 10 5 2>; - }; - - fec2: ethernet@20b4000 { - compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec"; - reg = <0x020b4000 0x4000>; - interrupt-names = "int0", "pps"; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_ENET>, - <&clks IMX6UL_CLK_ENET_AHB>, - <&clks IMX6UL_CLK_ENET_PTP>, - <&clks IMX6UL_CLK_ENET2_REF_125M>, - <&clks IMX6UL_CLK_ENET2_REF_125M>; - clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; - fsl,num-tx-queues = <1>; - fsl,num-rx-queues = <1>; - fsl,stop-mode = <&gpr 0x10 4>; - fsl,magic-packet; - status = "disabled"; - }; - - kpp: keypad@20b8000 { - compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp"; - reg = <0x020b8000 0x4000>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_KPP>; - status = "disabled"; - }; - - wdog1: watchdog@20bc000 { - compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; - reg = <0x020bc000 0x4000>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_WDOG1>; - }; - - wdog2: watchdog@20c0000 { - compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; - reg = <0x020c0000 0x4000>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_WDOG2>; - status = "disabled"; - }; - - clks: clock-controller@20c4000 { - compatible = "fsl,imx6ul-ccm"; - reg = <0x020c4000 0x4000>; - interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; - #clock-cells = <1>; - clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; - clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; - }; - - anatop: anatop@20c8000 { - compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop", - "syscon", "simple-mfd"; - reg = <0x020c8000 0x1000>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - - reg_3p0: regulator-3p0 { - compatible = "fsl,anatop-regulator"; - regulator-name = "vdd3p0"; - regulator-min-microvolt = <2625000>; - regulator-max-microvolt = <3400000>; - anatop-reg-offset = <0x120>; - anatop-vol-bit-shift = <8>; - anatop-vol-bit-width = <5>; - anatop-min-bit-val = <0>; - anatop-min-voltage = <2625000>; - anatop-max-voltage = <3400000>; - anatop-enable-bit = <0>; - }; - - reg_arm: regulator-vddcore { - compatible = "fsl,anatop-regulator"; - regulator-name = "cpu"; - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1450000>; - regulator-always-on; - anatop-reg-offset = <0x140>; - anatop-vol-bit-shift = <0>; - anatop-vol-bit-width = <5>; - anatop-delay-reg-offset = <0x170>; - anatop-delay-bit-shift = <24>; - anatop-delay-bit-width = <2>; - anatop-min-bit-val = <1>; - anatop-min-voltage = <725000>; - anatop-max-voltage = <1450000>; - }; - - reg_soc: regulator-vddsoc { - compatible = "fsl,anatop-regulator"; - regulator-name = "vddsoc"; - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1450000>; - regulator-always-on; - anatop-reg-offset = <0x140>; - anatop-vol-bit-shift = <18>; - anatop-vol-bit-width = <5>; - anatop-delay-reg-offset = <0x170>; - anatop-delay-bit-shift = <28>; - anatop-delay-bit-width = <2>; - anatop-min-bit-val = <1>; - anatop-min-voltage = <725000>; - anatop-max-voltage = <1450000>; - }; - - tempmon: tempmon { - compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; - interrupt-parent = <&gpc>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; - }; - }; - - usbphy1: usbphy@20c9000 { - compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; - reg = <0x020c9000 0x1000>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_USBPHY1>; - phy-3p0-supply = <®_3p0>; - fsl,anatop = <&anatop>; - }; - - usbphy2: usbphy@20ca000 { - compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; - reg = <0x020ca000 0x1000>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_USBPHY2>; - phy-3p0-supply = <®_3p0>; - fsl,anatop = <&anatop>; - }; - - snvs: snvs@20cc000 { - compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; - reg = <0x020cc000 0x4000>; - - snvs_rtc: snvs-rtc-lp { - compatible = "fsl,sec-v4.0-mon-rtc-lp"; - regmap = <&snvs>; - offset = <0x34>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - }; - - snvs_poweroff: snvs-poweroff { - compatible = "syscon-poweroff"; - regmap = <&snvs>; - offset = <0x38>; - value = <0x60>; - mask = <0x60>; - status = "disabled"; - }; - - snvs_pwrkey: snvs-powerkey { - compatible = "fsl,sec-v4.0-pwrkey"; - regmap = <&snvs>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - linux,keycode = <KEY_POWER>; - wakeup-source; - status = "disabled"; - }; - - snvs_lpgpr: snvs-lpgpr { - compatible = "fsl,imx6ul-snvs-lpgpr"; - }; - }; - - epit1: epit@20d0000 { - reg = <0x020d0000 0x4000>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; - }; - - epit2: epit@20d4000 { - reg = <0x020d4000 0x4000>; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; - }; - - src: reset-controller@20d8000 { - compatible = "fsl,imx6ul-src", "fsl,imx51-src"; - reg = <0x020d8000 0x4000>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - #reset-cells = <1>; - }; - - gpc: gpc@20dc000 { - compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc"; - reg = <0x020dc000 0x4000>; - interrupt-controller; - #interrupt-cells = <3>; - interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&intc>; - }; - - iomuxc: pinctrl@20e0000 { - compatible = "fsl,imx6ul-iomuxc"; - reg = <0x020e0000 0x4000>; - }; - - gpr: iomuxc-gpr@20e4000 { - compatible = "fsl,imx6ul-iomuxc-gpr", - "fsl,imx6q-iomuxc-gpr", "syscon"; - reg = <0x020e4000 0x4000>; - }; - - gpt2: timer@20e8000 { - compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; - reg = <0x020e8000 0x4000>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_GPT2_BUS>, - <&clks IMX6UL_CLK_GPT2_SERIAL>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - sdma: sdma@20ec000 { - compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma", - "fsl,imx35-sdma"; - reg = <0x020ec000 0x4000>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_IPG>, - <&clks IMX6UL_CLK_SDMA>; - clock-names = "ipg", "ahb"; - #dma-cells = <3>; - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; - }; - - pwm5: pwm@20f0000 { - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; - reg = <0x020f0000 0x4000>; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_PWM5>, - <&clks IMX6UL_CLK_PWM5>; - clock-names = "ipg", "per"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm6: pwm@20f4000 { - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; - reg = <0x020f4000 0x4000>; - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_PWM6>, - <&clks IMX6UL_CLK_PWM6>; - clock-names = "ipg", "per"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm7: pwm@20f8000 { - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; - reg = <0x020f8000 0x4000>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_PWM7>, - <&clks IMX6UL_CLK_PWM7>; - clock-names = "ipg", "per"; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm8: pwm@20fc000 { - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; - reg = <0x020fc000 0x4000>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_PWM8>, - <&clks IMX6UL_CLK_PWM8>; - clock-names = "ipg", "per"; - #pwm-cells = <3>; - status = "disabled"; - }; - }; - - aips2: bus@2100000 { - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x02100000 0x100000>; - ranges; - - crypto: crypto@2140000 { - compatible = "fsl,imx6ul-caam", "fsl,sec-v4.0"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x2140000 0x3c000>; - ranges = <0 0x2140000 0x3c000>; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_CAAM_IPG>, <&clks IMX6UL_CLK_CAAM_ACLK>, - <&clks IMX6UL_CLK_CAAM_MEM>; - clock-names = "ipg", "aclk", "mem"; - - sec_jr0: jr@1000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x1000 0x1000>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - }; - - sec_jr1: jr@2000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x2000 0x1000>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - }; - - sec_jr2: jr@3000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x3000 0x1000>; - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - usbotg1: usb@2184000 { - compatible = "fsl,imx6ul-usb", "fsl,imx27-usb"; - reg = <0x02184000 0x200>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_USBOH3>; - fsl,usbphy = <&usbphy1>; - fsl,usbmisc = <&usbmisc 0>; - fsl,anatop = <&anatop>; - ahb-burst-config = <0x0>; - tx-burst-size-dword = <0x10>; - rx-burst-size-dword = <0x10>; - status = "disabled"; - }; - - usbotg2: usb@2184200 { - compatible = "fsl,imx6ul-usb", "fsl,imx27-usb"; - reg = <0x02184200 0x200>; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_USBOH3>; - fsl,usbphy = <&usbphy2>; - fsl,usbmisc = <&usbmisc 1>; - ahb-burst-config = <0x0>; - tx-burst-size-dword = <0x10>; - rx-burst-size-dword = <0x10>; - status = "disabled"; - }; - - usbmisc: usbmisc@2184800 { - #index-cells = <1>; - compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc"; - reg = <0x02184800 0x200>; - }; - - fec1: ethernet@2188000 { - compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec"; - reg = <0x02188000 0x4000>; - interrupt-names = "int0", "pps"; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_ENET>, - <&clks IMX6UL_CLK_ENET_AHB>, - <&clks IMX6UL_CLK_ENET_PTP>, - <&clks IMX6UL_CLK_ENET_REF>, - <&clks IMX6UL_CLK_ENET_REF>; - clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; - fsl,num-tx-queues = <1>; - fsl,num-rx-queues = <1>; - fsl,stop-mode = <&gpr 0x10 3>; - fsl,magic-packet; - status = "disabled"; - }; - - usdhc1: mmc@2190000 { - compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; - reg = <0x02190000 0x4000>; - interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_USDHC1>, - <&clks IMX6UL_CLK_USDHC1>, - <&clks IMX6UL_CLK_USDHC1>; - clock-names = "ipg", "ahb", "per"; - fsl,tuning-step = <2>; - fsl,tuning-start-tap = <20>; - bus-width = <4>; - status = "disabled"; - }; - - usdhc2: mmc@2194000 { - compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; - reg = <0x02194000 0x4000>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_USDHC2>, - <&clks IMX6UL_CLK_USDHC2>, - <&clks IMX6UL_CLK_USDHC2>; - clock-names = "ipg", "ahb", "per"; - bus-width = <4>; - fsl,tuning-step = <2>; - fsl,tuning-start-tap = <20>; - status = "disabled"; - }; - - adc1: adc@2198000 { - compatible = "fsl,imx6ul-adc", "fsl,vf610-adc"; - reg = <0x02198000 0x4000>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_ADC1>; - num-channels = <2>; - clock-names = "adc"; - fsl,adck-max-frequency = <30000000>, <40000000>, - <20000000>; - status = "disabled"; - }; - - i2c1: i2c@21a0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; - reg = <0x021a0000 0x4000>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_I2C1>; - status = "disabled"; - }; - - i2c2: i2c@21a4000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; - reg = <0x021a4000 0x4000>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_I2C2>; - status = "disabled"; - }; - - i2c3: i2c@21a8000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; - reg = <0x021a8000 0x4000>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_I2C3>; - status = "disabled"; - }; - - memory-controller@21b0000 { - compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc"; - reg = <0x021b0000 0x4000>; - clocks = <&clks IMX6UL_CLK_MMDC_P0_IPG>; - }; - - weim: weim@21b8000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim"; - reg = <0x021b8000 0x4000>; - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_EIM>; - fsl,weim-cs-gpr = <&gpr>; - status = "disabled"; - }; - - ocotp: efuse@21bc000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,imx6ul-ocotp", "syscon"; - reg = <0x021bc000 0x4000>; - clocks = <&clks IMX6UL_CLK_OCOTP>; - - tempmon_calib: calib@38 { - reg = <0x38 4>; - }; - - tempmon_temp_grade: temp-grade@20 { - reg = <0x20 4>; - }; - - cpu_speed_grade: speed-grade@10 { - reg = <0x10 4>; - }; - }; - - csi: csi@21c4000 { - compatible = "fsl,imx6ul-csi", "fsl,imx7-csi"; - reg = <0x021c4000 0x4000>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_CSI>; - clock-names = "mclk"; - status = "disabled"; - }; - - lcdif: lcdif@21c8000 { - compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif"; - reg = <0x021c8000 0x4000>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_LCDIF_PIX>, - <&clks IMX6UL_CLK_LCDIF_APB>, - <&clks IMX6UL_CLK_DUMMY>; - clock-names = "pix", "axi", "disp_axi"; - status = "disabled"; - }; - - pxp: pxp@21cc000 { - compatible = "fsl,imx6ul-pxp"; - reg = <0x021cc000 0x4000>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_PXP>; - clock-names = "axi"; - }; - - qspi: spi@21e0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi"; - reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>; - reg-names = "QuadSPI", "QuadSPI-memory"; - interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_QSPI>, - <&clks IMX6UL_CLK_QSPI>; - clock-names = "qspi_en", "qspi"; - status = "disabled"; - }; - - wdog3: watchdog@21e4000 { - compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; - reg = <0x021e4000 0x4000>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_WDOG3>; - status = "disabled"; - }; - - uart2: serial@21e8000 { - compatible = "fsl,imx6ul-uart", - "fsl,imx6q-uart"; - reg = <0x021e8000 0x4000>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_UART2_IPG>, - <&clks IMX6UL_CLK_UART2_SERIAL>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart3: serial@21ec000 { - compatible = "fsl,imx6ul-uart", - "fsl,imx6q-uart"; - reg = <0x021ec000 0x4000>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_UART3_IPG>, - <&clks IMX6UL_CLK_UART3_SERIAL>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart4: serial@21f0000 { - compatible = "fsl,imx6ul-uart", - "fsl,imx6q-uart"; - reg = <0x021f0000 0x4000>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_UART4_IPG>, - <&clks IMX6UL_CLK_UART4_SERIAL>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart5: serial@21f4000 { - compatible = "fsl,imx6ul-uart", - "fsl,imx6q-uart"; - reg = <0x021f4000 0x4000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_UART5_IPG>, - <&clks IMX6UL_CLK_UART5_SERIAL>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - i2c4: i2c@21f8000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; - reg = <0x021f8000 0x4000>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_I2C4>; - status = "disabled"; - }; - - uart6: serial@21fc000 { - compatible = "fsl,imx6ul-uart", - "fsl,imx6q-uart"; - reg = <0x021fc000 0x4000>; - interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_UART6_IPG>, - <&clks IMX6UL_CLK_UART6_SERIAL>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - }; - }; -}; |